idnits 2.17.1 draft-ietf-isis-wg-mib-00.txt: Checking boilerplate required by RFC 5378 and the IETF Trust (see https://trustee.ietf.org/license-info): ---------------------------------------------------------------------------- ** Looks like you're using RFC 2026 boilerplate. This must be updated to follow RFC 3978/3979, as updated by RFC 4748. Checking nits according to https://www.ietf.org/id-info/1id-guidelines.txt: ---------------------------------------------------------------------------- ** Missing expiration date. The document expiration date should appear on the first and last page. ** The document seems to lack a 1id_guidelines paragraph about Internet-Drafts being working documents. ** The document seems to lack a 1id_guidelines paragraph about 6 months document validity. ** The document seems to lack a 1id_guidelines paragraph about the list of current Internet-Drafts. == No 'Intended status' indicated for this document; assuming Proposed Standard == It seems as if not all pages are separated by form feeds - found 0 form feeds but 71 pages Checking nits according to https://www.ietf.org/id-info/checklist : ---------------------------------------------------------------------------- ** The document seems to lack an IANA Considerations section. (See Section 2.2 of https://www.ietf.org/id-info/checklist for how to handle the case when there are no actions for IANA.) ** The document seems to lack separate sections for Informative/Normative References. All references will be assumed normative when checking for downward references. ** There is 1 instance of too long lines in the document, the longest one being 7 characters in excess of 72. ** There are 2404 instances of lines with control characters in the document. ** The abstract seems to contain references ([2], [3]), which it shouldn't. Please replace those with straight textual mentions of the documents in question. Miscellaneous warnings: ---------------------------------------------------------------------------- == The copyright year in the RFC 3978 Section 5.4 Copyright Line does not match the current year -- The document seems to lack a disclaimer for pre-RFC5378 work, but may have content which was first submitted before 10 November 2008. If you have contacted all the original authors and they are all willing to grant the BCP78 rights to the IETF Trust, then this is fine, and you can ignore this comment. If not, you may need to add the pre-RFC5378 disclaimer. (See the Legal Provisions document at https://trustee.ietf.org/license-info for more information.) -- The document date (December 1998) is 9263 days in the past. Is this intentional? Checking references for intended status: Proposed Standard ---------------------------------------------------------------------------- (See RFCs 3967 and 4897 for information about using normative references to lower-maturity documents in RFCs) == Unused Reference: '1' is defined on line 2991, but no explicit reference was found in the text -- Possible downref: Non-RFC (?) normative reference: ref. '1' ** Obsolete normative reference: RFC 1142 (ref. '2') (Obsoleted by RFC 7142) Summary: 11 errors (**), 0 flaws (~~), 4 warnings (==), 3 comments (--). Run idnits with the --verbose option for more detailed information about the items above. -------------------------------------------------------------------------------- 2 Internet-Draft ISIS MIB December 1998 4 Management Information Base for IS-IS 6 8 Thu Feb 25 16:29:25 EST 1999 10 Jeff Parker, Editor 12 Nexabit Networks, Inc. 14 Status of this Memo 16 This document is an Internet-Draft and is in full conformance 17 with all provisions of Section 10 of RFC2026. 19 Internet-Drafts are working documents of the Internet 20 Engineering Task Force (IETF), its areas, and its working 21 groups. Note that other groups may also distribute working 22 documents as Internet-Drafts. 24 Internet-Drafts are draft documents valid for a maximum of six 25 months and may be updated, replaced, or obsoleted by other 26 documents at any time. It is inappropriate to use Internet- 27 Drafts as reference material or to cite them other than as 28 "work in progress." 30 The list of current Internet-Drafts can be accessed at 31 http://www.ietf.org/ietf/1id-abstracts.txt 33 The list of Internet-Draft Shadow Directories can be accessed 34 at http://www.ietf.org/shadow.html. 36 Copyright Notice 38 Copyright (C) The Internet Society (1997). All Rights 39 Reserved. 41 Abstract 43 This document describes a management information base for the 44 IS-IS Routing protocol, as described in RFC 1142 [2], when it 45 is used to construct routing tables for IP networks, as 46 described in RFC 1195 [3]. 48 This memo defines an experimental portion of the Management 49 Information Base (MIB) for use with network management 50 protocols in the Internet community. 52 This memo is based on a draft revision of an IETF MIB dated 53 March of 1994 and titled "Integrated IS-IS Management 54 Information Base". This version has been modified to include 55 MIB-II syntax, to exclude portions of the protocol that are 56 not relevant to IP, such as the ES-IS protocol, and to add 57 management support for current practice. 59 Table of Contents 61 1. Overview............................................. 3 62 2. Definition of IS-IS MIB.............................. 4 63 3. Acknowledgments...................................... 69 64 4. References........................................... 69 65 5. Security.Considerations.............................. 69 66 6. Authors'.Address..................................... 69 67 7. Full Copyright Statement............................. 71 69 1. Overview 71 This document is provided to the IETF working group on IS-IS. 73 The ISIS MIB includes of the following objects 75 - isisSystem 77 This table contains information specific to a single 78 instance of the IS-IS protocol running on a router. 80 - isisL2SummAddr 82 This table holds summary addresses configured 83 for each Level 2 instance of the IS-IS protocol 84 running on a router. 86 - isisCirc 88 This table contains information specific to a 89 broadcast or point-to-point interface in the 90 system. 92 - isisISAdj 94 This table contains information about 95 adjacencies to routers maintained by the 96 protocol. Entries in this table cannot be 97 created by management action: they are 98 established through the Hello protocol. 100 - isisISAdjIPAddr 102 This table contains the set of IP Addresses of 103 neighboring Intermediate Systems as reported in 104 received IIH PDUs. 106 - isisReachAddr 108 This table contains information about an address 109 prefix manually configured on the system or 110 learned through another protocol. 112 - isisIPRATable 113 This table contains information about IP 114 reachable address manually configured on this 115 system or learned from another protocol. 117 2. Definition of IS-IS MIB 119 -- This document defines an experimental portion of the MIB 120 -- containing objects for managing the operation of the IS-IS 121 -- protocol. The objects are mainly derived from the GDMO 122 -- definitions in ISO 10589. 123 -- 124 -- The contents of the MIB are based on a draft revision of an IETF 125 -- MIB dated September 1992 and titled "Integrated IS-IS Management 126 -- Information Base". 127 -- 128 -- Portions of the orignal MIB, such as objects for ES-IS exchange, 129 -- have not been included due to being inapplicable. Additionally, 130 -- corrections and enhancements have been included. 131 -- 132 -- The names of some original items have been left in the text 133 -- as comments, as an indication of missing items. Many of these 134 -- are relevant to routing CLNS traffic 135 -- 137 ISIS-MIB DEFINITIONS ::= BEGIN 139 IMPORTS 140 TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue 141 FROM SNMPv2-TC 142 MODULE-IDENTITY, OBJECT-TYPE, 143 OBJECT-IDENTITY, Integer32, Counter32, IpAddress, TimeTicks 144 FROM SNMPv2-SMI; 146 nexabitIsis MODULE-IDENTITY 147 LAST-UPDATED "9902251200Z" -- UTC date of the most recent REVISION. 148 ORGANIZATION "Nexabit Networks, Inc." 149 CONTACT-INFO 150 "Jeff Parker 151 Nexabit Networks, LLC 152 200 Nickerson Rd. 153 Marlborough, MA 01752 154 jparker@nexabit.com" 156 DESCRIPTION 157 "" 158 ::= { XXXX YYYY } 160 -- OBJECT IDENTIFIER definitions 161 isisSystem OBJECT-IDENTITY 162 STATUS current 163 DESCRIPTION 164 "" 165 ::= { isis 1 } 167 isisCirc OBJECT-IDENTITY 168 STATUS current 169 DESCRIPTION 170 "" 171 ::= { isis 2 } 173 isisISAdj OBJECT-IDENTITY 174 STATUS current 175 DESCRIPTION 176 "" 177 ::= { isis 3 } 179 isisReachAddr OBJECT-IDENTITY 180 STATUS current 181 DESCRIPTION 182 "" 183 ::= { isis 4 } 185 isisIPReachAddr OBJECT-IDENTITY 186 STATUS current 187 DESCRIPTION 188 "" 189 ::= { isis 5 } 191 -- Type definitions 193 OSINSAddress ::= TEXTUAL-CONVENTION 194 STATUS current 195 DESCRIPTION 196 "OSI Network Service Address, e.g. NSAP, Network Entity Title" 197 SYNTAX OCTET STRING (SIZE(0..20)) 199 SNPAAddress ::= TEXTUAL-CONVENTION 200 STATUS current 201 DESCRIPTION 202 "A MAC Address or DTE Address or other SNPA Address." 203 SYNTAX OCTET STRING (SIZE(0..20)) 205 NSAPPrefix ::= TEXTUAL-CONVENTION 206 STATUS current 207 DESCRIPTION 208 "NSAP Prefix. The first octet of the string is used to 209 encode as an unsigned integer the length in bits of the 210 subsequent prefix. This length must be a multiple of 4 211 bits and may range from 0..160. The second and 212 subsequent octets are used to hold the prefix value. 213 If the last 4 bits of the last octet are not part of 214 the prefix then their value is undefined." 215 SYNTAX OCTET STRING (SIZE(1..21)) 217 SNPAPrefix ::= TEXTUAL-CONVENTION 218 STATUS current 219 DESCRIPTION 220 "SNPA Prefix. The first octet of the string is used to 221 encode as an unsigned integer the length in bits of the 222 subsequent prefix. The second and 223 subsequent octets are used to hold the prefix value. 224 Bits in the last octet which are not part of 225 the prefix have undefined value." 226 SYNTAX OCTET STRING (SIZE(1..21)) 228 SystemID ::= TEXTUAL-CONVENTION 229 STATUS current 230 DESCRIPTION 231 "A system ID." 232 SYNTAX OCTET STRING (SIZE(0..8)) 234 OperState ::= TEXTUAL-CONVENTION 235 STATUS current 236 DESCRIPTION 237 "Type used in enabling and disabling a row." 238 SYNTAX INTEGER 239 { 240 off(1), 241 on(2) 242 } 244 LSPBuffSize ::= TEXTUAL-CONVENTION 245 STATUS current 246 DESCRIPTION 247 "Integer sub range for LSP size." 248 SYNTAX Integer32 (512..1492) 250 LevelState ::= TEXTUAL-CONVENTION 251 STATUS current 252 DESCRIPTION 253 "states of the ISIS protocol." 254 SYNTAX INTEGER 255 { 256 off (1), 257 on (2), 258 waiting (3) 259 } 261 SupportedProtocol ::= TEXTUAL-CONVENTION 262 STATUS current 263 DESCRIPTION 264 "Types of network protocol supported by Integrated ISIS. 265 The values for ISO8473 and IP are those registered for 266 these protocols in ISO TR9577." 267 SYNTAX INTEGER 268 { 269 iso8473(129), 270 ip(204) 271 } 273 DefaultMetric ::= TEXTUAL-CONVENTION 274 STATUS current 275 DESCRIPTION 276 "Integer sub-range for default metric for single hop." 277 SYNTAX Integer32 (1..63) 279 OtherMetric ::= TEXTUAL-CONVENTION 280 STATUS current 281 DESCRIPTION 282 "Integer sub-range for metrics other than the default 283 metric for single hop." 284 SYNTAX Integer32 (0..63) 286 MetricType ::= TEXTUAL-CONVENTION 287 STATUS current 288 DESCRIPTION 289 "Class of metric at Level 2." 290 SYNTAX INTEGER 291 { 292 internal(1), 293 external(2) 294 } 296 CircuitID ::= TEXTUAL-CONVENTION 297 STATUS current 298 DESCRIPTION 299 "ID for a circuit." 300 SYNTAX OCTET STRING (SIZE(2..9)) 302 ISPriority ::= TEXTUAL-CONVENTION 303 STATUS current 304 DESCRIPTION 305 "Integer sub-range for ISIS priority." 306 SYNTAX Integer32 (1..127) 308 -- Behaviour Definitions 310 -- ResettingTimer behaviour definition 311 -- "This object specifies the interval between certain events in 312 -- the operation of the protocol state machine. If the value of 313 -- this object is set to a new value while the protocol state 314 -- machine is in operation, the implementation shall take the 315 -- necessary steps to ensure that for any time interval which 316 -- was in progress when the value of the corresponding object 317 -- was changed, the next expiration of that interval takes place 318 -- the specified time after the original start of that interval, 319 -- or immediately, whichever is later. The precision with which 320 -- this time shall be implemented shall be the same as that 321 -- associated with the basic operation of the timer object." 323 -- OperationalState behaviour definition 324 -- "This object controls the enabling and disabling of the 325 -- corresponding table row. Setting this object to the value 326 -- off has the effect of disabling the corresponding row. 327 -- Setting this object to the value on has the effect of 328 -- enabling the corresponding row. Setting the value of this 329 -- object to the same value as its current value has no effect. 331 -- If the table entry also contains an object controlling the 332 -- row status then the object following the operationalState 333 -- behaviour shall not be set to on when the object following 334 -- the Row Status behaviour has value off. An attempt to do 335 -- so is rejected." 337 isisSysTable OBJECT-TYPE 338 SYNTAX SEQUENCE OF IsisSysEntry 339 MAX-ACCESS not-accessible 340 STATUS current 341 DESCRIPTION 342 "The set of instances of the Integrated IS-IS protocol 343 existing on the system." 344 ::= { isisSystem 1 } 346 isisSysEntry OBJECT-TYPE 347 SYNTAX IsisSysEntry 348 MAX-ACCESS not-accessible 349 STATUS current 350 DESCRIPTION 351 "Each row defines information specific to a single 352 instance of the protocol existing on the system." 353 REFERENCE "{ISIS.poi cLNSISISBasic-P (1)}" 354 INDEX { isisSysInstance } 355 ::= { isisSysTable 1 } 357 IsisSysEntry ::= 358 SEQUENCE { 359 isisSysInstance 360 Integer32, 361 isisSysVersion 362 DisplayString, 363 isisSysType 364 INTEGER, 365 isisSysID 366 SystemID, 367 isisSysMaxPathSplits 368 Integer32, 369 isisSysMinLSPTransInt 370 Integer32, 371 isisSysMaxLSPGenInt 372 Integer32, 373 isisSysMinBroadLSPTransInt 374 Integer32, 375 isisSysCompSNPInt 376 Integer32, 377 isisSysOrigL1LSPBuffSize 378 LSPBuffSize, 379 isisSysMaxAreaAddresses 380 Integer32, 381 isisSysMinLSPGenInt 382 Integer32, 383 isisSysPollESHelloRate 384 Integer32, 385 isisSysPartSNPInt 386 Integer32, 387 isisSysWaitTime 388 Integer32, 389 isisSysDRISISHelloTimer 390 Integer32, 391 isisSysOperState 392 OperState, 393 isisSysL1State 394 LevelState, 395 isisSysCorrLSPs 396 Counter32, 397 isisSysLSPL1DbaseOloads 398 Counter32, 399 isisSysManAddrDropFromAreas 400 Counter32, 401 isisSysAttmptToExMaxSeqNums 402 Counter32, 403 isisSysSeqNumSkips 404 Counter32, 405 isisSysOwnLSPPurges 406 Counter32, 407 isisSysIDFieldLenMismatches 408 Counter32, 409 isisSysMaxAreaAddrMismatches 410 Counter32, 411 isisSysOrigL2LSPBuffSize 412 LSPBuffSize, 413 isisSysL2State 414 LevelState, 415 isisSysLSPL2DbaseOloads 416 Counter32, 417 isisSysAuthAreaType 418 INTEGER, 419 isisSysAuthAreaTransPwd 420 OCTET STRING, 421 isisSysAuthDomainType 422 INTEGER, 423 isisSysAuthDomainTransPwd 424 OCTET STRING, 425 isisSysAuthFails 426 Counter32, 427 isisSysLSPIgnoreErrors 428 TruthValue, 429 isisSysLogAdjacencyChanges 430 TruthValue, 431 isisSysPartChanges 432 Counter32, 433 isisSysMaxAreaCheck 434 TruthValue, 435 isisSysExistState 436 RowStatus 437 } 439 isisSysInstance OBJECT-TYPE 440 SYNTAX Integer32 441 MAX-ACCESS read-only 442 STATUS current 443 DESCRIPTION 444 "The unique identifier of the Integrated IS-IS instance 445 to which this row corresponds. This object follows the 446 index behaviour." 447 ::= { isisSysEntry 1 } 449 isisSysVersion OBJECT-TYPE 450 SYNTAX DisplayString 451 MAX-ACCESS read-only 452 STATUS current 453 DESCRIPTION 454 "The version number of the IS-IS protocol to which this 455 instance conforms. This value must be set by the 456 implementation when the row is valid." 457 REFERENCE "{ISIS.aoi version (1)}" 458 ::= { isisSysEntry 2 } 460 isisSysType OBJECT-TYPE 461 SYNTAX INTEGER { 462 level1IS (1), 463 level2IS (2), 464 level1-l2IS (3) 465 } 466 MAX-ACCESS read-write 467 STATUS current 468 DESCRIPTION 469 "The type of this instance of the Integrated IS-IS 470 protocol. This object follows the 471 replaceOnlyWhileDisabled behaviour." 472 REFERENCE "{ISIS.aoi iSType (2)}" 473 ::= { isisSysEntry 3 } 475 isisSysID OBJECT-TYPE 476 SYNTAX SystemID 477 MAX-ACCESS read-only 478 STATUS current 479 DESCRIPTION 480 "The ID for this instance of the Integrated IS-IS 481 protocol. This value is appended to each of the 482 instance's area addresses to form the Network Entity 483 Titles valid for this instance. The derivation of a value 484 for this object is implementation-specific. Some 485 implementations may assign values and not permit write 486 MAX-ACCESS, others may require the value to be set manually." 487 REFERENCE "{ISIS.aoi systemId (119)}" 488 ::= { isisSysEntry 4 } 490 isisSysMaxPathSplits OBJECT-TYPE 491 SYNTAX Integer32 (1..32) 492 MAX-ACCESS read-write 493 STATUS current 494 DESCRIPTION 495 "Maximum number of paths with equal routing metric value 496 which it is permitted to split between. This object 497 follows the replaceOnlyWhileDisabled behaviour." 498 REFERENCE "{ISIS.aoi maximumPathSplits (3)}" 499 DEFVAL { 2 } 500 ::= { isisSysEntry 5 } 502 isisSysMinLSPTransInt OBJECT-TYPE 503 SYNTAX Integer32 (1..300) 504 MAX-ACCESS read-write 505 STATUS current 506 DESCRIPTION 507 "Minimum interval, in seconds, between re-transmission of 508 an LSP. This object follows the resettingTimer 509 behaviour." 510 REFERENCE "{ISIS.aoi minimumLSPTransmissionInterval (5)}" 511 DEFVAL { 5 } 512 ::= { isisSysEntry 6 } 514 isisSysMaxLSPGenInt OBJECT-TYPE 515 SYNTAX Integer32 (1..120) 516 MAX-ACCESS read-write 517 STATUS current 518 DESCRIPTION 519 "Maximum interval, in seconds, between generated LSPs by 520 this instance. This object follows the resettingTimer 521 behaviour." 522 REFERENCE "{ISIS.aoi maximumLSPGenerationInterval (6)}" 523 DEFVAL { 60 } 524 ::= { isisSysEntry 7 } 526 isisSysMinBroadLSPTransInt OBJECT-TYPE 527 SYNTAX Integer32 (1..65535) 528 MAX-ACCESS read-write 529 STATUS current 530 DESCRIPTION 531 "Minimum interval, in milliseconds, between transmission 532 of LSPs on a broadcast circuit. This object follows the 533 resettingTimer behaviour. This timer shall be capable of 534 a resolution not coarser than 10 milliseconds." 535 REFERENCE "{ISIS.aoi 536 minimumBroadcastLSPTransmissionInterval (7)}" 537 DEFVAL { 33 } 538 ::= { isisSysEntry 8 } 540 isisSysCompSNPInt OBJECT-TYPE 541 SYNTAX Integer32 (1..600) 542 MAX-ACCESS read-write 543 STATUS current 544 DESCRIPTION 545 "Interval, in seconds, between generation of Complete 546 Sequence Numbers PDUs by a designated Intermediate System 547 on a broadcast circuit. This object follows the 548 resettingTimer behaviour." 549 REFERENCE "{ISIS.aoi completeSNPInterval (8)}" 550 DEFVAL { 10 } 551 ::= { isisSysEntry 9 } 553 isisSysOrigL1LSPBuffSize OBJECT-TYPE 555 SYNTAX LSPBuffSize 556 MAX-ACCESS read-write 557 STATUS current 558 DESCRIPTION 559 "The maximum size of Level 1 LSPs and SNPs originated by 560 this instance. This object follows the 561 replaceOnlyWhileDisabled behaviour." 562 REFERENCE "{ISIS.aoi originatingL1LSPBufferSize (9)}" 563 DEFVAL { 1492 } 564 ::= { isisSysEntry 10 } 566 isisSysMaxAreaAddresses OBJECT-TYPE 567 SYNTAX Integer32 (0..254) 568 MAX-ACCESS read-write 569 STATUS current 570 DESCRIPTION 571 "The maximum number of area addresses to be permitted for 572 the area in which this instance exists. Note that all 573 Intermediate Systems in the same area must have the same 574 value configured for this attribute if correct operation 575 is to be assumed. This object follows the 576 replaceOnlyWhileDisabled behaviour." 577 REFERENCE "{ISIS.aoi maximumAreaAddresses (4)}" 578 DEFVAL { 3 } 579 ::= { isisSysEntry 11 } 581 isisSysMinLSPGenInt OBJECT-TYPE 582 SYNTAX Integer32 (1..65535) 583 MAX-ACCESS read-write 584 STATUS current 585 DESCRIPTION 586 "Minimum interval, in seconds, between successive 587 generation of LSPs with the same LSPID by this instance. 588 This object follows the resettingTimer behaviour." 589 REFERENCE "{ISIS.aoi minimumLSPGenerationInterval (11)}" 590 DEFVAL { 30 } 591 ::= { isisSysEntry 12 } 593 isisSysPollESHelloRate OBJECT-TYPE 594 SYNTAX Integer32 (1..65535) 595 MAX-ACCESS read-write 596 STATUS current 597 DESCRIPTION 598 "The value, in seconds, to be used for the suggested ES 599 configuration timer in ISH PDUs when soliciting the ES 600 configuration." 601 REFERENCE "{ISIS.aoi pollESHelloRate (13)}" 602 DEFVAL { 50 } 603 ::= { isisSysEntry 13 } 605 isisSysPartSNPInt OBJECT-TYPE 606 SYNTAX Integer32 (1..120) 607 MAX-ACCESS read-write 608 STATUS current 609 DESCRIPTION 610 "Minimum interval between sending Partial Sequence Number 611 PDUs. This object follows the resettingTimer behaviour." 612 REFERENCE "{ISIS.aoi partialSNPInterval (14)}" 613 DEFVAL { 2 } 614 ::= { isisSysEntry 14 } 616 isisSysWaitTime OBJECT-TYPE 617 SYNTAX Integer32 (1..65535) 618 MAX-ACCESS read-write 619 STATUS current 620 DESCRIPTION 621 "Number of seconds to delay in waiting state before 622 entering on state. This object follows the resettingTimer 623 behaviour." 624 REFERENCE "{ISIS.aoi waitingTime (15)}" 625 DEFVAL { 60 } 626 ::= { isisSysEntry 15 } 628 isisSysDRISISHelloTimer OBJECT-TYPE 629 SYNTAX Integer32 (1..120) 630 MAX-ACCESS read-write 631 STATUS current 632 DESCRIPTION 633 "The interval, in seconds, between the generation of IIH 634 PDUs by the designated IS on a LAN. This object follows 635 the resettingTimer behaviour." 636 REFERENCE "{ISIS.aoi dRISISHelloTimer (16)}" 637 DEFVAL { 1 } 638 ::= { isisSysEntry 16 } 640 isisSysOperState OBJECT-TYPE 641 SYNTAX OperState 642 MAX-ACCESS read-write 643 STATUS current 644 DESCRIPTION 645 "The operational state of this instance of the Integrated 646 IS-IS protocol. Setting this object to the value on when 647 its current value is off enables operation of this 648 instance of the Integrated IS-IS protocol." 649 DEFVAL { off } 650 ::= { isisSysEntry 17 } 652 isisSysL1State OBJECT-TYPE 653 SYNTAX LevelState 654 MAX-ACCESS read-only 655 STATUS current 656 DESCRIPTION 657 "The state of the Level 1 database." 658 REFERENCE "{ISIS.aoi l1State (17)}" 659 ::= { isisSysEntry 18 } 661 isisSysCorrLSPs OBJECT-TYPE 662 SYNTAX Counter32 663 MAX-ACCESS read-only 664 STATUS current 665 DESCRIPTION 666 "Number of corrupted LSPs detected." 667 REFERENCE "{ISIS.aoi corruptedLSPsDetected (19)}" 668 ::= { isisSysEntry 19 } 670 isisSysLSPL1DbaseOloads OBJECT-TYPE 671 SYNTAX Counter32 672 MAX-ACCESS read-only 673 STATUS current 674 DESCRIPTION 675 "Number of times the LSP L1 database has become 676 overloaded." 677 REFERENCE "{ISIS.aoi lSPL1DatabaseOverloads (20)}" 678 ::= { isisSysEntry 20 } 680 isisSysManAddrDropFromAreas OBJECT-TYPE 681 SYNTAX Counter32 682 MAX-ACCESS read-only 683 STATUS current 684 DESCRIPTION 685 "Number of times a manual address has been dropped from 686 the area." 687 REFERENCE "{ISIS.aoi manualAddressesDroppedFromArea (21)}" 688 ::= { isisSysEntry 21 } 689 isisSysAttmptToExMaxSeqNums OBJECT-TYPE 690 SYNTAX Counter32 691 MAX-ACCESS read-only 692 STATUS current 693 DESCRIPTION 694 "Number of times the IS has attempted to exceed the 695 maximum sequence number." 696 REFERENCE "{ISIS.aoi 697 attemptsToExceedmaximumSequenceNumber (22)}" 698 ::= { isisSysEntry 22 } 700 isisSysSeqNumSkips OBJECT-TYPE 701 SYNTAX Counter32 702 MAX-ACCESS read-only 703 STATUS current 704 DESCRIPTION 705 "Number of times a sequence number skip has occurred." 706 REFERENCE "{ISIS.aoi sequenceNumberSkips (23)}" 707 ::= { isisSysEntry 23 } 709 isisSysOwnLSPPurges OBJECT-TYPE 710 SYNTAX Counter32 711 MAX-ACCESS read-only 712 STATUS current 713 DESCRIPTION 714 "Number of times a zero-aged copy of the system's own LSP 715 is received from some other node." 716 REFERENCE "{ISIS.aoi ownLSPPurges (24)}" 717 ::= { isisSysEntry 24 } 719 isisSysIDFieldLenMismatches OBJECT-TYPE 720 SYNTAX Counter32 721 MAX-ACCESS read-only 722 STATUS current 723 DESCRIPTION 724 "Number of times a PDU is received with a different value 725 for ID field length to that of the receiving system." 726 REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}" 727 ::= { isisSysEntry 25 } 729 isisSysMaxAreaAddrMismatches OBJECT-TYPE 730 SYNTAX Counter32 731 MAX-ACCESS read-only 732 STATUS current 733 DESCRIPTION 734 "Number of times a PDU is received with a different value 735 for MaximumAreaAddresses from that of the receiving 736 system." 737 REFERENCE "{ISIS.aoi MaximumAreaAddressesMismatches (118)}" 738 ::= { isisSysEntry 26 } 740 -- The following objects map those from the cLNSISISLevel2-P 741 -- Package 743 isisSysOrigL2LSPBuffSize OBJECT-TYPE 744 SYNTAX LSPBuffSize 745 MAX-ACCESS read-write 746 STATUS current 747 DESCRIPTION 748 "The maximum size of Level 2 LSPs and SNPs originated by 749 this system. This object follows the 750 replaceOnlyWhileDisabled behaviour." 751 REFERENCE "{ISIS.aoi originatingL2LSPBufferSize (26)}" 752 DEFVAL { 1492 } 753 ::= { isisSysEntry 27 } 755 isisSysL2State OBJECT-TYPE 756 SYNTAX LevelState 757 MAX-ACCESS read-only 758 STATUS current 759 DESCRIPTION 760 "The state of the Level 2 database." 761 REFERENCE "{ISIS.aoi l2State (28)}" 762 ::= { isisSysEntry 28 } 764 isisSysLSPL2DbaseOloads OBJECT-TYPE 765 SYNTAX Counter32 766 MAX-ACCESS read-only 767 STATUS current 768 DESCRIPTION 769 "Number of times the Level 2 LSP database has become 770 overloaded." 771 REFERENCE "{ISIS.aoi lSPL2DatabaseOverloads (32)}" 772 ::= { isisSysEntry 29 } 774 isisSysAuthAreaType OBJECT-TYPE 775 SYNTAX INTEGER { 776 deny(0), 777 plaintext(1) 778 } 779 MAX-ACCESS read-write 780 STATUS current 781 DESCRIPTION 782 "What authentication scheme, if any, is used to protect 783 Level 1 Link State packets?" 784 DEFVAL { 0 } 785 ::= { isisSysEntry 30 } 787 isisSysAuthAreaTransPwd OBJECT-TYPE 788 SYNTAX OCTET STRING 789 MAX-ACCESS read-write 790 STATUS current 791 DESCRIPTION 792 "The value to be used as the Authentication Key in 793 Level 1 Link State Packets whenever the value of 794 isisSysAuthAreaTransPwdType has a value of plaintext. 795 A modification of isisSysAuthAreaTransPwdType 796 does not modify the isisSysAuthAreaTransPwd value. 798 Reading this object always results in an OCTET 799 STRING of length zero; authentication may not 800 be bypassed by reading the MIB object." 801 DEFVAL { "" } 802 ::= { isisSysEntry 31 } 804 isisSysAuthDomainType OBJECT-TYPE 805 SYNTAX INTEGER { 806 deny(0), 807 plaintext(1) 808 } 809 MAX-ACCESS read-write 810 STATUS current 811 DESCRIPTION 812 "What authentication scheme, if any, is used to protect 813 Level 2 Link State packets?" 814 DEFVAL { 0 } 815 ::= { isisSysEntry 32 } 817 isisSysAuthDomainTransPwd OBJECT-TYPE 818 SYNTAX OCTET STRING 819 MAX-ACCESS read-write 820 STATUS current 821 DESCRIPTION 822 "The value to be used as the Authentication Key in 823 Level 2 Link State Packets whenever the value of 824 isisSysAuthDomainTransPwdType has a value of plaintext. 825 A modification of isisSysAuthDomainTransPwdType 826 does not modify the isisSysAuthDomainTransPwd value. 828 Reading this object always results in an OCTET 829 STRING of length zero; authentication may not 830 be bypassed by reading the MIB object." 831 DEFVAL { "" } 832 ::= { isisSysEntry 33 } 834 isisSysAuthFails OBJECT-TYPE 835 SYNTAX Counter32 836 MAX-ACCESS read-only 837 STATUS current 838 DESCRIPTION 839 "The number of authentication failures recognized by this 840 instance of the protocol." 841 ::= { isisSysEntry 34 } 843 isisSysLSPIgnoreErrors OBJECT-TYPE 844 SYNTAX TruthValue 845 MAX-ACCESS read-write 846 STATUS current 847 DESCRIPTION 848 "If true, allow the router to ignore IS-IS link state packets 849 (LSPs) that are received with internal checksum errors rather 850 than purging the LSPs." 851 DEFVAL { false } 852 ::= { isisSysEntry 35 } 854 isisSysLogAdjacencyChanges OBJECT-TYPE 855 SYNTAX TruthValue 856 MAX-ACCESS read-write 857 STATUS current 858 DESCRIPTION 859 "If true, causes IS-IS to generate a log message when an 860 IS-IS adjacency changes state (up or down)." 861 DEFVAL { false } 862 ::= { isisSysEntry 36 } 864 isisSysMaxAreaCheck OBJECT-TYPE 865 SYNTAX TruthValue 866 MAX-ACCESS read-write 867 STATUS current 868 DESCRIPTION 869 "When on, enables checking of maximum area 870 addresses per IS version of ISO10589." 871 DEFVAL { 1 } 872 ::= { isisSysEntry 37 } 874 isisSysPartChanges OBJECT-TYPE 875 SYNTAX Counter32 876 MAX-ACCESS read-only 877 STATUS current 878 DESCRIPTION 879 "partition changes" 880 ::= { isisSysEntry 38 } 882 isisSysExistState OBJECT-TYPE 883 SYNTAX RowStatus 884 MAX-ACCESS read-write 885 STATUS current 886 DESCRIPTION 887 "The state of the ISIS router. Turning this off 888 forces the router to forget all current state" 889 DEFVAL { active } 890 ::= { isisSysEntry 39 } 892 -- The Level 1 Manual Area Address Table 893 -- contains the set of area addresses manually configured 894 -- for each instance of the Integrated IS-IS protocol. 895 -- At least one row in which the value of 896 -- isisManAreaAddrExistState 897 -- is on must be present for each instance of the protocol 898 -- when isisSysOperState is also on for that instance. The 899 -- maximum number of rows in this table for each instance of 900 -- the protocol for which the object isisManAreaAddrExistState 901 -- has the value on is the value of maximumAreaAddresses (as 902 -- defined in ISO 10589) for that instance. An Attempt 903 -- to create a new row such that the number of rows with 904 -- isisManAreaAddrExistState set to on for that protocol 905 -- instance exceeds maximumAreaAddresses is rejected." 907 isisManAreaAddrTable OBJECT-TYPE 908 SYNTAX SEQUENCE OF IsisManAreaAddrEntry 909 MAX-ACCESS not-accessible 910 STATUS current 911 DESCRIPTION 912 "The set of manual area addresses configured on this 913 Intermediate System." 914 REFERENCE "{ISIS.aoi manualAreaAddresses (10)}" 915 ::= { isisSystem 2 } 917 isisManAreaAddrEntry OBJECT-TYPE 918 SYNTAX IsisManAreaAddrEntry 919 MAX-ACCESS not-accessible 920 STATUS current 921 DESCRIPTION 922 "Each entry contains one area address manually configured 923 on this system" 924 INDEX { isisManAreaAddrSysInstance, 925 isisManAreaAddr } 926 ::= { isisManAreaAddrTable 1 } 928 IsisManAreaAddrEntry ::= 929 SEQUENCE { 930 isisManAreaAddrSysInstance 931 Integer32, 932 isisManAreaAddr 933 OSINSAddress, 934 isisManAreaAddrExistState 935 RowStatus 936 } 938 isisManAreaAddrSysInstance OBJECT-TYPE 939 SYNTAX Integer32 940 MAX-ACCESS read-only 941 STATUS current 942 DESCRIPTION 943 "The unique identifier of the Integrated IS-IS instance 944 to which this row corresponds. This object follows the 945 index behaviour." 946 ::= { isisManAreaAddrEntry 1 } 948 isisManAreaAddr OBJECT-TYPE 949 SYNTAX OSINSAddress 950 MAX-ACCESS read-only 951 STATUS current 952 DESCRIPTION 953 "A manually configured area address for this system. This 954 object follows the index behaviour." 955 ::= { isisManAreaAddrEntry 2 } 957 isisManAreaAddrExistState OBJECT-TYPE 958 SYNTAX RowStatus 959 MAX-ACCESS read-create 960 STATUS current 961 DESCRIPTION 962 "The state of the isisManAreaAddrEntry. This object 963 follows the Row Status behaviour. If an attempt is 964 made to set this object to the value off when the 965 corresponding isisManAreaAddrEntry is the only valid 966 entry for this instance and when the corresponding ISIS 967 instance has isisSysOperState set to On then the attempt 968 is rejected." 969 DEFVAL { active } 970 ::= { isisManAreaAddrEntry 3 } 972 -- The Level 1 Area Address Table 974 -- The Level 1 Area Address Table contains the 975 -- union of the sets of area addresses reported in all Level 1 976 -- LSPs received by this Intermediate System. 978 isisAreaAddrTable OBJECT-TYPE 979 SYNTAX SEQUENCE OF IsisAreaAddrEntry 980 MAX-ACCESS not-accessible 981 STATUS current 982 DESCRIPTION 983 "The union of the sets of area addresses reported in all 984 Level 1 LSPs received by this instance of the protocol." 985 REFERENCE "{ISIS.aoi areaAddresses (18)}" 986 ::= { isisSystem 3 } 988 isisAreaAddrEntry OBJECT-TYPE 989 SYNTAX IsisAreaAddrEntry 990 MAX-ACCESS not-accessible 991 STATUS current 992 DESCRIPTION 993 "Each entry contains one area address reported in a 994 Level 1 LSP received by this instance of the protocol." 995 INDEX { isisAreaAddrSysInstance, 996 isisAreaAddr } 997 ::= { isisAreaAddrTable 1 } 999 IsisAreaAddrEntry ::= 1000 SEQUENCE { 1001 isisAreaAddrSysInstance 1002 Integer32, 1003 isisAreaAddr 1004 OSINSAddress 1005 } 1007 isisAreaAddrSysInstance OBJECT-TYPE 1008 SYNTAX Integer32 1009 MAX-ACCESS read-only 1010 STATUS current 1011 DESCRIPTION 1012 "The unique identifier of the Integrated IS-IS instance 1013 to which this row corresponds." 1014 ::= { isisAreaAddrEntry 1 } 1016 isisAreaAddr OBJECT-TYPE 1017 SYNTAX OSINSAddress 1018 MAX-ACCESS read-only 1019 STATUS current 1020 DESCRIPTION 1021 "An area address reported in a Level 1 LSP received by 1022 this instance of the protocol." 1023 ::= { isisAreaAddrEntry 2 } 1025 -- The System Integrated Group 1027 -- The System Integrated Group is present if the system 1028 -- supports Integrated ISIS at Level 1. 1030 -- The System Protocol Supported Table 1032 -- The System Protocol Supported Table contains the manually 1033 -- configured set of protocols supported by each 1034 -- instance of the Integrated ISIS protocol. 1035 -- 1037 isisSysProtSuppTable OBJECT-TYPE 1038 SYNTAX SEQUENCE OF IsisSysProtSuppEntry 1039 MAX-ACCESS not-accessible 1040 STATUS current 1041 DESCRIPTION 1042 "This table contains the manually configured set of 1043 protocols supported by each instance of the Integrated 1044 ISIS protocol." 1045 ::= { isisSystem 4 } 1047 isisSysProtSuppEntry OBJECT-TYPE 1048 SYNTAX IsisSysProtSuppEntry 1049 MAX-ACCESS not-accessible 1050 STATUS current 1051 DESCRIPTION 1052 "Each entry contains one protocol supported by an 1053 instance of the Integrated ISIS protocol." 1055 INDEX { isisSysProtSuppSysInstance, 1056 isisSysProtSuppProtocol } 1058 ::= { isisSysProtSuppTable 1 } 1060 IsisSysProtSuppEntry ::= 1061 SEQUENCE { 1062 isisSysProtSuppSysInstance 1063 INTEGER, 1064 isisSysProtSuppProtocol 1065 SupportedProtocol, 1066 isisSysProtSuppExistState 1067 RowStatus 1068 } 1070 isisSysProtSuppSysInstance OBJECT-TYPE 1071 SYNTAX INTEGER 1072 MAX-ACCESS read-write 1073 STATUS current 1074 DESCRIPTION 1075 "The unique identifier of the Integrated IS-IS instance 1076 to which this row corresponds. This object follows the 1077 index behaviour." 1078 ::= { isisSysProtSuppEntry 1 } 1080 isisSysProtSuppProtocol OBJECT-TYPE 1081 SYNTAX SupportedProtocol 1082 MAX-ACCESS read-write 1083 STATUS current 1084 DESCRIPTION 1085 "One supported protocol. This object follows the index 1086 behaviour." 1087 ::= { isisSysProtSuppEntry 2 } 1089 isisSysProtSuppExistState OBJECT-TYPE 1090 SYNTAX RowStatus 1091 MAX-ACCESS read-write 1092 STATUS current 1093 DESCRIPTION 1094 "The state of the isisSysProtSuppEntry. This object 1095 follows the RowStatus bevahiors." 1096 DEFVAL { active } 1097 ::= { isisSysProtSuppEntry 3 } 1099 -- The Level 2 IP Group 1101 -- The Level 2 IP Group is present if the system 1102 -- supports IP Integrated IS-IS at Level 2 1104 -- The Level 2 Summary Address Table 1106 -- The Level 2 Summary Address Table contains the set of summary 1107 -- addresses manually configured for each Level 2 instance of 1108 -- IP Integrated ISIS on the system. 1110 isisL2SummAddrTable OBJECT-TYPE 1111 SYNTAX SEQUENCE OF IsisL2SummAddrEntry 1112 MAX-ACCESS not-accessible 1113 STATUS current 1114 DESCRIPTION 1115 "The set of IP summary addresses to use in forming the 1116 contents of Level 2 LSPs originated by this level 2 1117 Intermediate System." 1118 ::= { isisSystem 5 } 1120 isisL2SummAddrEntry OBJECT-TYPE 1121 SYNTAX IsisL2SummAddrEntry 1122 MAX-ACCESS not-accessible 1123 STATUS current 1124 DESCRIPTION 1125 "Each entry contains one IP summary address." 1126 INDEX { isisL2SummAddrSysInstance, 1127 isisL2SummAddress, 1128 isisL2SummAddrMask } 1129 ::= { isisL2SummAddrTable 1 } 1131 IsisL2SummAddrEntry ::= 1132 SEQUENCE { 1133 isisL2SummAddrSysInstance 1134 Integer32, 1135 isisL2SummAddress 1136 IpAddress, 1137 isisL2SummAddrMask 1138 IpAddress, 1139 isisL2SummAddrExistState 1140 RowStatus, 1141 isisL2SummAddrOperState 1142 OperState, 1143 isisL2SummAddrDefaultMetric 1144 DefaultMetric, 1145 isisL2SummAddrDelayMetric 1146 OtherMetric, 1147 isisL2SummAddrExpenseMetric 1148 OtherMetric, 1149 isisL2SummAddrErrorMetric 1150 OtherMetric 1151 } 1153 isisL2SummAddrSysInstance OBJECT-TYPE 1154 SYNTAX Integer32 1155 MAX-ACCESS read-only 1156 STATUS current 1157 DESCRIPTION 1158 "The unique identifier of the Integrated IS-IS instance 1159 to which this row corresponds. This object follows the 1160 replaceOnlyWhileDisabled and index behaviours." 1161 ::= { isisL2SummAddrEntry 1 } 1163 isisL2SummAddress OBJECT-TYPE 1164 SYNTAX IpAddress 1165 MAX-ACCESS read-only 1166 STATUS current 1167 DESCRIPTION 1168 "The IP Address value for this summary address. This 1169 object follows the index behaviour." 1170 ::= { isisL2SummAddrEntry 2 } 1172 isisL2SummAddrMask OBJECT-TYPE 1173 SYNTAX IpAddress 1174 MAX-ACCESS read-only 1175 STATUS current 1176 DESCRIPTION 1177 "The mask value for this summary address. This object 1178 follows the index behaviour." 1179 ::= { isisL2SummAddrEntry 3 } 1181 isisL2SummAddrExistState OBJECT-TYPE 1183 SYNTAX RowStatus 1184 MAX-ACCESS read-create 1185 STATUS current 1186 DESCRIPTION 1187 "The existence state of this summary address. This object 1188 follows the row status behaviour." 1189 DEFVAL { active } 1190 ::= { isisL2SummAddrEntry 4 } 1192 isisL2SummAddrOperState OBJECT-TYPE 1193 SYNTAX OperState 1194 MAX-ACCESS read-create 1195 STATUS current 1196 DESCRIPTION 1197 "The operational state of this entry. This object follows 1198 the operationalState behaviour. When the operational 1199 state changes if this would cause the contents of Level 2 1200 LSPs originated by the system to change then those new 1201 LSPs must be generated and sent as soon as is permitted 1202 by the ISIS protocol." 1203 DEFVAL { off } 1204 ::= { isisL2SummAddrEntry 5 } 1206 isisL2SummAddrDefaultMetric OBJECT-TYPE 1207 SYNTAX DefaultMetric 1208 MAX-ACCESS read-create 1209 STATUS current 1210 DESCRIPTION 1211 "The default metric value to announce this summary 1212 address with in Level 2 LSPs generated by this system." 1213 DEFVAL { 20 } 1214 ::= { isisL2SummAddrEntry 6 } 1216 isisL2SummAddrDelayMetric OBJECT-TYPE 1217 SYNTAX OtherMetric 1218 MAX-ACCESS read-create 1219 STATUS current 1220 DESCRIPTION 1221 "The delay metric value to announce this summary address 1222 with in Level 2 LSPs generated by this system. The value 1223 of zero is reserved to indicate that this metric is not 1224 supported." 1225 DEFVAL { 0 } 1226 ::= { isisL2SummAddrEntry 7 } 1227 isisL2SummAddrExpenseMetric OBJECT-TYPE 1228 SYNTAX OtherMetric 1229 MAX-ACCESS read-create 1230 STATUS current 1231 DESCRIPTION 1232 "The expense metric value to announce this summary 1233 address with in Level 2 LSPs generated by this system. 1234 The value of zero is reserved to indicate that this 1235 metric is not supported." 1236 DEFVAL { 0 } 1237 ::= { isisL2SummAddrEntry 8 } 1239 isisL2SummAddrErrorMetric OBJECT-TYPE 1240 SYNTAX OtherMetric 1241 MAX-ACCESS read-create 1242 STATUS current 1243 DESCRIPTION 1244 "The error metric value to announce this summary address 1245 with in Level 2 LSPs generated by this system. The value 1246 of zero is reserved to indicate that this metric is not 1247 supported." 1248 DEFVAL { 0 } 1249 ::= { isisL2SummAddrEntry 9 } 1251 -- The Circuit Group 1253 -- The Circuit Group is current 1255 -- The Circuit Table 1256 -- Each broadcast or point-to-point interface on the system 1257 -- corresponds to one entry in the Circuit table. There may be 1258 -- many X.25 DA circuit entries in the Circuit table for an 1259 -- X.25 interface. 1261 isisCircTable OBJECT-TYPE 1262 SYNTAX SEQUENCE OF IsisCircEntry 1263 MAX-ACCESS not-accessible 1264 STATUS current 1265 DESCRIPTION 1266 "The table of circuits used by each instance of 1267 Integrated IS-IS on this system." 1268 ::= { isisCirc 1 } 1270 isisCircEntry OBJECT-TYPE 1271 SYNTAX IsisCircEntry 1272 MAX-ACCESS not-accessible 1273 STATUS current 1274 DESCRIPTION 1275 "An isisCircEntry exists for each circuit used by 1276 Integrated IS-IS on this system." 1277 INDEX { isisCircSysInstance, 1278 isisCircIndex } 1279 ::= { isisCircTable 1 } 1281 IsisCircEntry ::= 1282 SEQUENCE { 1283 isisCircSysInstance 1284 Integer32, 1285 isisCircIndex 1286 Integer32, 1287 isisCircIfIndex 1288 Integer32, 1289 isisCircIfSubIndex 1290 Integer32, 1291 isisCircOperState 1292 OperState, 1293 isisCircExistState 1294 RowStatus, 1295 isisCircType 1296 INTEGER, 1297 isisCircL1DefaultMetric 1298 DefaultMetric, 1299 isisCircL1DelayMetric 1300 OtherMetric, 1301 isisCircL1ExpenseMetric 1302 OtherMetric, 1303 isisCircL1ErrorMetric 1304 OtherMetric, 1305 isisCircExtDomain 1306 TruthValue, 1307 isisCircAdjChanges 1308 Counter32, 1309 isisCircInitFails 1310 Counter32, 1311 isisCircRejAdjs 1312 Counter32, 1313 isisCircOutCtrlPDUs 1314 Counter32, 1315 isisCircInCtrlPDUs 1316 Counter32, 1317 isisCircIDFieldLenMismatches 1318 Counter32, 1319 isisCircL2DefaultMetric 1320 DefaultMetric, 1321 isisCircL2DelayMetric 1322 OtherMetric, 1323 isisCircL2ExpenseMetric 1324 OtherMetric, 1325 isisCircL2ErrorMetric 1326 OtherMetric, 1327 isisCircManL2Only 1328 TruthValue, 1329 isisCircL1ISPriority 1330 ISPriority, 1331 isisCircL1CircID 1332 CircuitID, 1333 isisCircL1DesIS 1334 SystemID, 1335 isisCircLANL1DesISChanges 1336 Counter32, 1337 isisCircL2ISPriority 1338 ISPriority, 1339 isisCircL2CircID 1340 CircuitID, 1341 isisCircL2DesIS 1342 SystemID, 1343 isisCircLANL2DesISChanges 1344 Counter32, 1345 isisCircMCAddr 1346 INTEGER, 1347 isisCircPtToPtCircID 1348 CircuitID, 1349 isisCircISISL1HelloTimer 1350 Integer32, 1351 isisCircISISL2HelloTimer 1352 Integer32, 1353 isisCircISISHelloMultiplier 1354 Integer32, 1355 isisCircL1CSNPInterval 1356 Integer32, 1357 isisCircL2CSNPInterval 1358 Integer32, 1359 isisCircLSPInterval 1360 Integer32, 1361 isisCircLSPThrottle 1362 Integer32, 1363 isisCircPassiveCircuit 1364 TruthValue, 1365 isisCircMeshGroupEnabled 1366 INTEGER, 1367 isisCircMeshGroup 1368 Integer32, 1369 isisCircL1AuthType 1370 INTEGER, 1371 isisCircL1Password 1372 OCTET STRING, 1373 isisCircL2AuthType 1374 INTEGER, 1375 isisCircL2Password 1376 OCTET STRING, 1377 isisCircSmallHellos 1378 OperState, 1379 isisManAdjNeighNSAP 1380 OSINSAddress, 1381 isisManAdjNeighSNPA 1382 SNPAAddress 1383 } 1385 isisCircSysInstance OBJECT-TYPE 1386 SYNTAX Integer32 1387 MAX-ACCESS read-only 1388 STATUS current 1389 DESCRIPTION 1390 "The unique identifier of the Integrated IS-IS instance 1391 to which this row corresponds. This object follows the 1392 index behaviour." 1393 ::= { isisCircEntry 1 } 1395 isisCircIndex OBJECT-TYPE 1396 SYNTAX Integer32 (1..255) 1397 MAX-ACCESS read-only 1398 STATUS current 1399 DESCRIPTION 1400 "The identifier of this circuit, unique within the 1401 instance of the protocol. This object follows the index 1402 behaviour." 1403 ::= { isisCircEntry 2 } 1405 isisCircIfIndex OBJECT-TYPE 1406 SYNTAX Integer32 1407 MAX-ACCESS read-create 1408 STATUS current 1409 DESCRIPTION 1410 "The value of ifIndex for the interface to which this 1411 circuit corresponds. This object follows the 1412 replaceOnlyWhileDisabled behaviour." 1413 ::= { isisCircEntry 3 } 1415 isisCircIfSubIndex OBJECT-TYPE 1416 SYNTAX Integer32 1417 MAX-ACCESS read-create 1418 STATUS current 1419 DESCRIPTION 1420 "A specifier for the part of the interface ifIndex to which 1421 this circuit corresponds, such as a DLCI or VPI/VCI. 1422 This object follows the replaceOnlyWhileDisabled behaviour." 1423 ::= { isisCircEntry 4 } 1425 isisCircOperState OBJECT-TYPE 1426 SYNTAX OperState 1427 MAX-ACCESS read-create 1428 STATUS current 1429 DESCRIPTION 1430 "The operational state of the circuit. This object 1431 follows the operationalState behaviour." 1432 DEFVAL { off } 1433 ::= { isisCircEntry 5 } 1435 isisCircExistState OBJECT-TYPE 1436 SYNTAX RowStatus 1437 MAX-ACCESS read-create 1438 STATUS current 1439 DESCRIPTION 1440 "The existence state of this circuit. This object follows 1441 the Row Status behaviour." 1442 DEFVAL { active } 1443 ::= { isisCircEntry 6 } 1445 isisCircType OBJECT-TYPE 1446 SYNTAX INTEGER { 1447 broadcast(1), 1448 ptToPt(2), 1449 staticIn(3), 1450 staticOut(4), 1451 dA(5) 1452 } 1453 MAX-ACCESS read-create 1454 STATUS current 1455 DESCRIPTION 1456 "The type of the circuit. This object follows the 1457 replaceOnlyWhileDisabled behaviour. The type specified 1458 must be compatible with the type of the interface defined 1459 by the value of isisCircIfIndex." 1460 REFERENCE "{ISIS.aoi type (33)}" 1461 ::= { isisCircEntry 7 } 1463 isisCircL1DefaultMetric OBJECT-TYPE 1464 SYNTAX DefaultMetric 1465 MAX-ACCESS read-create 1466 STATUS current 1467 DESCRIPTION 1468 "The default metric value of this circuit for Level 1 1469 traffic." 1470 REFERENCE "{ISIS.aoi l1DefaultMetric (35)}" 1471 DEFVAL { 20 } 1472 ::= { isisCircEntry 8 } 1474 isisCircL1DelayMetric OBJECT-TYPE 1475 SYNTAX OtherMetric 1476 MAX-ACCESS read-create 1477 STATUS current 1478 DESCRIPTION 1479 "The delay metric value of this circuit for Level 1 1480 traffic. The value of zero is reserved to indicate that 1481 this metric is not supported." 1482 REFERENCE "{ISIS.aoi l1DelayMetric (36)}" 1483 DEFVAL { 0 } 1484 ::= { isisCircEntry 9 } 1486 isisCircL1ExpenseMetric OBJECT-TYPE 1487 SYNTAX OtherMetric 1488 MAX-ACCESS read-create 1489 STATUS current 1490 DESCRIPTION 1491 "The expense metric value of this circuit for Level 1 1492 traffic. The value of zero is reserved to indicate that 1493 this metric is not supported." 1494 REFERENCE "{ISIS.aoi l1ExpenseMetric (37)}" 1495 DEFVAL { 0 } 1496 ::= { isisCircEntry 10 } 1497 isisCircL1ErrorMetric OBJECT-TYPE 1498 SYNTAX OtherMetric 1499 MAX-ACCESS read-create 1500 STATUS current 1501 DESCRIPTION 1502 "The error metric value of this circuit for Level 1 1503 traffic. The value of zero is reserved to indicate that 1504 this metric is not supported." 1505 REFERENCE "{ISIS.aoi l1ErrorMetric (38)}" 1506 DEFVAL { 0 } 1507 ::= { isisCircEntry 11 } 1509 isisCircExtDomain OBJECT-TYPE 1510 SYNTAX TruthValue 1511 MAX-ACCESS read-create 1512 STATUS current 1513 DESCRIPTION 1514 "If true, suppress normal transmission of and 1515 interpretation of Intra-domain ISIS PDUs on this 1516 circuit." 1517 REFERENCE "{ISIS.aoi externalDomain (46)}" 1518 ::= { isisCircEntry 12 } 1520 isisCircAdjChanges OBJECT-TYPE 1521 SYNTAX Counter32 1522 MAX-ACCESS read-only 1523 STATUS current 1524 DESCRIPTION 1525 "The number of times an adjacency state change has 1526 occurred on this circuit." 1527 REFERENCE "{ISIS.aoi changesInAdjacencyState (40)}" 1528 ::= { isisCircEntry 13 } 1530 isisCircInitFails OBJECT-TYPE 1531 SYNTAX Counter32 1532 MAX-ACCESS read-only 1533 STATUS current 1534 DESCRIPTION 1535 "The number of times initialization of this circuit has 1536 failed." 1537 REFERENCE "{ISIS.aoi initializationFailures (41)}" 1538 ::= { isisCircEntry 14 } 1540 isisCircRejAdjs OBJECT-TYPE 1541 SYNTAX Counter32 1542 MAX-ACCESS read-only 1543 STATUS current 1544 DESCRIPTION 1545 "The number of times an adjacency has been rejected on 1546 this circuit." 1547 REFERENCE "{ISIS.aoi rejectedAdjacencies (42)}" 1548 ::= { isisCircEntry 15 } 1550 isisCircOutCtrlPDUs OBJECT-TYPE 1551 SYNTAX Counter32 1552 MAX-ACCESS read-only 1553 STATUS current 1554 DESCRIPTION 1555 "The number of IS-IS control PDUs sent on this circuit." 1556 REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}" 1557 ::= { isisCircEntry 16 } 1559 isisCircInCtrlPDUs OBJECT-TYPE 1560 SYNTAX Counter32 1561 MAX-ACCESS read-only 1562 STATUS current 1563 DESCRIPTION 1564 "The number of IS-IS control PDUs received on this 1565 circuit." 1566 REFERENCE "{ISIS.aoi controlPDUsReceived (44)}" 1567 ::= { isisCircEntry 17 } 1569 isisCircIDFieldLenMismatches OBJECT-TYPE 1570 SYNTAX Counter32 1571 MAX-ACCESS read-only 1572 STATUS current 1573 DESCRIPTION 1574 "The number of times an IS-IS control PDU with an ID 1575 field length different to that for this system has been 1576 received." 1577 REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}" 1578 ::= { isisCircEntry 18 } 1580 -- The following objects map those from the linkageISISLevel2-P 1581 -- package 1583 isisCircL2DefaultMetric OBJECT-TYPE 1584 SYNTAX DefaultMetric 1585 MAX-ACCESS read-create 1586 STATUS current 1587 DESCRIPTION 1588 "The default metric value of this circuit for level 2 1589 traffic." 1590 REFERENCE "{ISIS.aoi l2DefaultMetric (68)}" 1591 DEFVAL { 20 } 1592 ::= { isisCircEntry 19 } 1594 isisCircL2DelayMetric OBJECT-TYPE 1595 SYNTAX OtherMetric 1596 MAX-ACCESS read-create 1597 STATUS current 1598 DESCRIPTION 1599 "The delay metric value of this circuit for level 2 1600 traffic. The value of zero is reserved to indicate that 1601 this metric is not supported." 1602 REFERENCE "{ISIS.aoi l2DelayMetric (69)}" 1603 DEFVAL { 0 } 1604 ::= { isisCircEntry 20 } 1606 isisCircL2ExpenseMetric OBJECT-TYPE 1607 SYNTAX OtherMetric 1608 MAX-ACCESS read-create 1609 STATUS current 1610 DESCRIPTION 1611 "The expense metric value of this circuit for level 2 1612 traffic. The value of zero is reserved to indicate that 1613 this metric is not supported." 1614 REFERENCE "{ISIS.aoi l2ExpenseMetric (70)}" 1615 DEFVAL { 0 } 1616 ::= { isisCircEntry 21 } 1618 isisCircL2ErrorMetric OBJECT-TYPE 1619 SYNTAX OtherMetric 1620 MAX-ACCESS read-create 1621 STATUS current 1622 DESCRIPTION 1623 "The error metric value of this circuit for level 2 1624 traffic. The value of zero is reserved to indicate that 1625 this metric is not supported." 1626 REFERENCE "{ISIS.aoi l2ErrorMetric (71)}" 1627 DEFVAL { 0 } 1628 ::= { isisCircEntry 22 } 1630 isisCircManL2Only OBJECT-TYPE 1631 SYNTAX TruthValue 1632 MAX-ACCESS read-create 1633 STATUS current 1634 DESCRIPTION 1635 "When true, indicates that this circuit is to be used 1636 only for level 2. This object follows the 1637 replaceOnlyWhileDisabled behaviour." 1638 REFERENCE "{ISIS.aoi manualL2OnlyMode (72)}" 1639 DEFVAL { false } 1640 ::= { isisCircEntry 23 } 1642 -- The following objects map those from the 1643 -- linkageISISBroadcast-P package 1645 isisCircL1ISPriority OBJECT-TYPE 1646 SYNTAX ISPriority 1647 MAX-ACCESS read-create 1648 STATUS current 1649 DESCRIPTION 1650 "The priority for becoming LAN Level 1 Deignated 1651 Intermediate System on a broadcast circuit." 1652 REFERENCE "{ISIS.aoi l1IntermediateSystemPriority (47)}" 1653 DEFVAL { 64 } 1654 ::= { isisCircEntry 24 } 1656 isisCircL1CircID OBJECT-TYPE 1657 SYNTAX CircuitID 1658 MAX-ACCESS read-only 1659 STATUS current 1660 DESCRIPTION 1661 "The LAN ID allocated by the LAN Level 1 Designated 1662 Intermediate System. Where this system is not aware of 1663 the value (because it is not participating in the Level 1 1664 Designated Intermediate System election), this object has 1665 the value which would be proposed for this circuit (i.e. 1666 the concatenation of the local system ID and the one 1667 octet local Circuit ID for this circuit." 1668 REFERENCE "{ISIS.aoi l1CircuitID (48)}" 1669 ::= { isisCircEntry 25 } 1671 isisCircL1DesIS OBJECT-TYPE 1672 SYNTAX SystemID 1673 MAX-ACCESS read-only 1674 STATUS current 1675 DESCRIPTION 1676 "The ID of the LAN Level 1 Designated Intermediate System 1677 on this circuit. If, for any reason this system is not 1678 partaking in the relevant Designated Intermediate System 1679 election process, then the value returned is the zero 1680 length OCTET STRING." 1681 REFERENCE "{ISIS.aoi l1DesignatedIntermediateSystem (49)}" 1682 ::= { isisCircEntry 26 } 1684 isisCircLANL1DesISChanges OBJECT-TYPE 1685 SYNTAX Counter32 1686 MAX-ACCESS read-only 1687 STATUS current 1688 DESCRIPTION 1689 "The number of times the LAN Level 1 Designated 1690 Intermediate System has changed." 1691 REFERENCE "{ISIS.aoi 1692 lanL1DesignatedIntermediateSystemChanges (50)}" 1693 ::= { isisCircEntry 27 } 1695 -- The following objects map those from the 1696 -- linkageISISLevel2Broadcast-P package 1698 isisCircL2ISPriority OBJECT-TYPE 1699 SYNTAX ISPriority 1700 MAX-ACCESS read-create 1701 STATUS current 1702 DESCRIPTION 1703 "The priority for becoming LAN level 2 Designated 1704 Intermediate System." 1705 REFERENCE "{ISIS.aoi l2IntermediateSystemPriority (73)}" 1706 DEFVAL { 64 } 1707 ::= { isisCircEntry 28 } 1709 isisCircL2CircID OBJECT-TYPE 1710 SYNTAX CircuitID 1711 MAX-ACCESS read-only 1712 STATUS current 1713 DESCRIPTION 1714 "The LAN ID allocated by the LAN Level 2 Designated 1715 Intermediate System. Where this system is not aware of 1716 this value (because it is not participating in the Level 1717 2 Designated Intermediate System election), this object 1718 has the value which would be proposed for this circuit 1719 (i.e. the concatenation of the local system ID and the 1720 one octet local Circuit ID for this circuit." 1721 REFERENCE "{ISIS.aoi l2CircuitID (74)}" 1722 ::= { isisCircEntry 29 } 1724 isisCircL2DesIS OBJECT-TYPE 1725 SYNTAX SystemID 1726 MAX-ACCESS read-only 1727 STATUS current 1728 DESCRIPTION 1729 "The ID of the LAN Level 2 Designated Intermediate System 1730 on this circuit. If, for any reason, this system is not 1731 partaking in the relevant Designated Intermediate System 1732 election process, then the value returned is the zero 1733 length OCTET STRING." 1734 REFERENCE "{ISIS.aoi l2DesignatedIntermediateSystem (75)}" 1735 ::= { isisCircEntry 30 } 1737 isisCircLANL2DesISChanges OBJECT-TYPE 1738 SYNTAX Counter32 1739 MAX-ACCESS read-only 1740 STATUS current 1741 DESCRIPTION 1742 "The number of times the LAN Level 2 Designated 1743 Intermediate System has changed." 1744 REFERENCE "{ISIS.aoi 1745 lanL2DesignatedIntermediateSystemChanges (76)}" 1746 ::= { isisCircEntry 31 } 1748 isisCircMCAddr OBJECT-TYPE 1749 SYNTAX INTEGER{ 1750 group (1), 1751 functional (2) 1752 } 1753 MAX-ACCESS read-create 1754 STATUS current 1755 DESCRIPTION 1756 "Specifies which type of multicast address will 1757 be used for sending HELLO PDUs on this 1758 circuit." 1759 DEFVAL { 1 } 1760 ::= { isisCircEntry 32 } 1762 isisCircPtToPtCircID OBJECT-TYPE 1763 SYNTAX CircuitID 1764 MAX-ACCESS read-only 1765 STATUS current 1766 DESCRIPTION 1767 "The ID of the circuit allocated during initialization. 1768 If no value has been negotiated (either because the 1769 adjacency is to an End System, or because initialization 1770 has not yet successfully completed), this object has the 1771 value which would be proposed for this circuit (i.e. the 1772 concatenation of the local system ID and the one octet 1773 local Circuit ID for this circuit." 1774 REFERENCE "{ISIS.aoi ptPtCircuitID (51)}" 1775 ::= { isisCircEntry 33 } 1777 isisCircISISL1HelloTimer OBJECT-TYPE 1778 SYNTAX Integer32 (1..65535) 1779 MAX-ACCESS read-create 1780 STATUS current 1781 DESCRIPTION 1782 "Average period, in seconds, between Level 1 IIH PDUs on 1783 multiaccess networks. It is also used as the period between 1784 ISH PDUs when polling the ES configuration, and the 1785 period between Hellos on point to point circuits. This 1786 object follows the resettingTimer behaviour." 1787 REFERENCE "{ISIS.aoi iSISHelloTimer (45)}" 1788 DEFVAL { 10 } 1789 ::= { isisCircEntry 34 } 1791 isisCircISISL2HelloTimer OBJECT-TYPE 1792 SYNTAX Integer32 (1..65535) 1793 MAX-ACCESS read-create 1794 STATUS current 1795 DESCRIPTION 1796 "Average period, in seconds, between Level 2 IIH PDUs. 1797 This object follows the resettingTimer behaviour." 1798 REFERENCE "{ISIS.aoi iSISHelloTimer (45)}" 1799 DEFVAL { 10 } 1800 ::= { isisCircEntry 35 } 1802 isisCircISISHelloMultiplier OBJECT-TYPE 1803 SYNTAX Integer32 (3..1000) 1804 MAX-ACCESS read-create 1805 STATUS current 1806 DESCRIPTION 1807 "How many packets should receiver miss before declaring 1808 an adjacency down." 1809 REFERENCE "{ISIS.aoi iSISHelloTimer (45)}" 1810 DEFVAL { 3 } 1811 ::= { isisCircEntry 36 } 1813 isisCircL1CSNPInterval OBJECT-TYPE 1814 SYNTAX Integer32 (1..65535) 1815 MAX-ACCESS read-create 1816 STATUS current 1817 DESCRIPTION 1818 "Interval of time, in seconds, between transmission 1819 of CSNPs on multiaccess networks if this router is 1820 the designated router." 1821 REFERENCE "{}" 1822 DEFVAL { 10 } 1823 ::= { isisCircEntry 37 } 1825 isisCircL2CSNPInterval OBJECT-TYPE 1826 SYNTAX Integer32 (1..65535) 1827 MAX-ACCESS read-create 1828 STATUS current 1829 DESCRIPTION 1830 "Interval of time, in seconds, between transmission 1831 of level 2 CSNPs on multiaccess networks if this 1832 router is the designated router." 1833 REFERENCE "{}" 1834 DEFVAL { 10 } 1835 ::= { isisCircEntry 38 } 1837 isisCircLSPInterval OBJECT-TYPE 1838 SYNTAX Integer32 (1..65535) 1839 MAX-ACCESS read-create 1840 STATUS current 1841 DESCRIPTION 1842 "Minimum interval, in seconds, between re-transmission of 1843 an LSP on this circuit. This object follows the 1844 resettingTimer behaviour." 1845 REFERENCE "{}" 1846 DEFVAL { 1200 } 1847 ::= { isisCircEntry 39 } 1849 isisCircLSPThrottle OBJECT-TYPE 1850 SYNTAX Integer32 (1..65535) 1851 MAX-ACCESS read-create 1852 STATUS current 1853 DESCRIPTION 1854 "Minimal interval of time, in milliseconds, between 1855 transmissions of LSPs on this interface." 1856 REFERENCE "{}" 1857 DEFVAL { 33 } 1858 ::= { isisCircEntry 40 } 1860 isisCircPassiveCircuit OBJECT-TYPE 1861 SYNTAX TruthValue 1862 MAX-ACCESS read-create 1863 STATUS current 1864 DESCRIPTION 1865 "Should we include this interface in LSPs, even if 1866 it is not running the ISIS Protocol?" 1867 REFERENCE "{}" 1868 DEFVAL { false } 1869 ::= { isisCircEntry 41 } 1871 isisCircMeshGroupEnabled OBJECT-TYPE 1872 SYNTAX INTEGER { 1873 inactive(1), 1874 blocked(2), 1875 set(3) 1876 } 1877 MAX-ACCESS read-create 1878 STATUS current 1879 DESCRIPTION 1880 "Is this port a member of a mesh group, or blocked? 1881 Circuits in the same mesh group act as a virtual 1882 multiaccess network. LSPs seen on one circuit in 1883 a mesh group will not be flooded to another circuit 1884 in the same mesh group." 1885 REFERENCE "{}" 1886 DEFVAL { 1 } 1887 ::= { isisCircEntry 42 } 1889 isisCircMeshGroup OBJECT-TYPE 1890 SYNTAX Integer32 (1..2000000000) 1891 MAX-ACCESS read-create 1892 STATUS current 1893 DESCRIPTION 1894 "Circuits in the same mesh group act as a virtual 1895 multiaccess network. LSPs seen on one circuit in 1896 a mesh group will not be flooded to another circuit 1897 in the same mesh group. If isisCircMeshGroupEnabled 1898 is false, this value is ignored." 1899 REFERENCE "{}" 1900 DEFVAL { 1 } 1901 ::= { isisCircEntry 43 } 1903 isisCircL1AuthType OBJECT-TYPE 1904 SYNTAX INTEGER { 1905 deny(0), 1906 plaintext(1) 1907 } 1908 MAX-ACCESS read-create 1909 STATUS current 1910 DESCRIPTION 1911 "What authentication scheme, if any, is used to protect 1912 Level 1 hello packets?" 1913 REFERENCE "{}" 1914 DEFVAL { 1 } 1915 ::= { isisCircEntry 44 } 1917 isisCircL1Password OBJECT-TYPE 1918 SYNTAX OCTET STRING 1919 MAX-ACCESS read-create 1920 STATUS current 1921 DESCRIPTION 1922 "The value to be used as the Authentication Key in Level 1 1923 Hello packets whenever the corresponding instance of 1924 isisCircL1AuthType has a value of plaintext. A 1925 modification of the corresponding instance of 1926 isisCircL1AuthType does not modify the 1927 isisCircL1Password value. 1929 Reading this object always results in an OCTET 1930 STRING of length zero; authentication may not 1931 be bypassed by reading the MIB object." 1932 REFERENCE "{}" 1933 DEFVAL { ''H } 1934 ::= { isisCircEntry 45 } 1936 isisCircL2AuthType OBJECT-TYPE 1937 SYNTAX INTEGER { 1938 deny(0), 1939 plaintext(1) 1940 } 1941 MAX-ACCESS read-create 1942 STATUS current 1943 DESCRIPTION 1944 "What authentication scheme, if any, is used to protect 1945 Level 2 hello packets?" 1946 REFERENCE "{}" 1947 DEFVAL { 1 } 1948 ::= { isisCircEntry 46 } 1950 isisCircL2Password OBJECT-TYPE 1951 SYNTAX OCTET STRING 1952 MAX-ACCESS read-create 1953 STATUS current 1954 DESCRIPTION 1955 "The value to be used as the Authentication Key in Level 1 1956 Hello packets whenever the corresponding instance of 1957 isisCircL1AuthType has a value of plaintext. A 1958 modification of the corresponding instance of 1959 isisCircL1AuthType does not modify the 1960 isisCircL1Password value. 1962 Reading this object always results in an OCTET 1963 STRING of length zero; authentication may not 1964 be bypassed by reading the MIB object." 1965 REFERENCE "{}" 1966 DEFVAL { ''H } 1967 ::= { isisCircEntry 47 } 1969 isisCircSmallHellos OBJECT-TYPE 1970 SYNTAX OperState 1971 MAX-ACCESS read-write 1972 STATUS current 1973 DESCRIPTION 1974 "Can we send unpadded hellos on LAN circuits? Off means 1975 LAN Hellos must be padded." 1976 DEFVAL { off } 1977 ::= { isisCircEntry 48 } 1979 isisManAdjNeighNSAP OBJECT-TYPE 1980 SYNTAX OSINSAddress 1981 MAX-ACCESS read-write 1982 STATUS current 1983 DESCRIPTION 1984 "The address of the neighbour if this is a manual adjacency. 1985 This object follows the replaceOnlyWhileDisabled behaviour." 1986 ::= { isisCircEntry 49 } 1988 isisManAdjNeighSNPA OBJECT-TYPE 1989 SYNTAX SNPAAddress 1990 MAX-ACCESS read-write 1991 STATUS current 1992 DESCRIPTION 1993 "The SNPA of the neighbour if this is a manual adjacency. 1994 This object follows the replaceOnlyWhileDisabled behaviour." 1995 ::= { isisCircEntry 50 } 1997 -- The Circuit IS Group 1998 -- 1999 -- The Circuit IS Group is present if the system supports the 2000 -- IS functions of the ISO 9542 protocol. 2001 -- The Circuit IS Table 2002 -- 2003 -- This table is not implemented - jdp 2005 -- The IS Adjacency Group 2006 -- 2007 -- The IS Adjacency Group is current and contains information 2008 -- about adjacencies to routers maintained by the Integrated 2009 -- IS-IS protocol 2010 -- 2011 -- The IS Adjacency Table 2012 -- 2013 -- Each adjacency to an IS corresponds to one entry in this 2014 -- table. 2016 isisISAdjTable OBJECT-TYPE 2017 SYNTAX SEQUENCE OF IsisISAdjEntry 2018 MAX-ACCESS not-accessible 2019 STATUS current 2020 DESCRIPTION 2021 "The table of adjacencies to Intermediate Systems." 2022 ::= { isisISAdj 1 } 2024 isisISAdjEntry OBJECT-TYPE 2025 SYNTAX IsisISAdjEntry 2026 MAX-ACCESS not-accessible 2027 STATUS current 2028 DESCRIPTION 2029 "Each entry corresponds to one adjacency to an 2030 Intermediate System on this system." 2031 INDEX { isisISAdjSysInstance, 2032 isisISAdjCircIndex, 2033 isisISAdjIndex } 2034 ::= { isisISAdjTable 1 } 2036 IsisISAdjEntry ::= 2037 SEQUENCE { 2038 isisISAdjSysInstance 2039 Integer32, 2040 isisISAdjCircIndex 2041 Integer32, 2042 isisISAdjIndex 2043 Integer32, 2044 isisISAdjState 2045 INTEGER, 2046 isisISAdjNeighSNPAAddress 2047 SNPAAddress, 2048 isisISAdjNeighSysType 2049 INTEGER, 2050 isisISAdjNeighSysID 2051 OCTET STRING, 2052 isisISAdjUsage 2053 INTEGER, 2054 isisISAdjHoldTimer 2055 Integer32, 2056 isisISAdjNeighPriority 2057 ISPriority 2058 } 2060 isisISAdjSysInstance OBJECT-TYPE 2061 SYNTAX Integer32 2062 MAX-ACCESS read-only 2063 STATUS current 2064 DESCRIPTION 2065 "The unique identifier of the Integrated IS-IS instance 2066 to which this row corresponds." 2067 ::= { isisISAdjEntry 1 } 2069 isisISAdjCircIndex OBJECT-TYPE 2070 SYNTAX Integer32 2071 MAX-ACCESS read-only 2072 STATUS current 2073 DESCRIPTION 2074 "The identifier of the Circuit which is the parent of the 2075 IS adjacency." 2076 ::= { isisISAdjEntry 2 } 2077 isisISAdjIndex OBJECT-TYPE 2078 SYNTAX Integer32 2079 MAX-ACCESS read-only 2080 STATUS current 2081 DESCRIPTION 2082 "A unique value identifying the IS adjacency from all 2083 other such adjacencies on this circuit. This value is 2084 assigned by the system when the adjacency is created 2085 automatically." 2086 ::= { isisISAdjEntry 3 } 2088 isisISAdjState OBJECT-TYPE 2089 SYNTAX INTEGER { 2090 initializing (1), 2091 up (2), 2092 failed (3), 2093 down (4) 2094 } 2095 MAX-ACCESS read-only 2096 STATUS current 2097 DESCRIPTION 2098 "The state of the adjacency" 2099 REFERENCE "{ISIS.aoi adjacencyState (78)}" 2100 ::= { isisISAdjEntry 4 } 2102 isisISAdjNeighSNPAAddress OBJECT-TYPE 2103 SYNTAX SNPAAddress 2104 MAX-ACCESS read-only 2105 STATUS current 2106 DESCRIPTION 2107 "The SNPA address of the neighboring system." 2108 REFERENCE "{ISIS.aoi neighbourSNPAAddress (79)}" 2109 ::= { isisISAdjEntry 5 } 2111 isisISAdjNeighSysType OBJECT-TYPE 2112 SYNTAX INTEGER { 2113 unknown(1), 2114 intermediateSystem(3), 2115 l1IntermediateSystem(4), 2116 l2IntermediateSystem(5) 2117 } 2118 MAX-ACCESS read-only 2119 STATUS current 2120 DESCRIPTION 2121 "The type of the neighboring system." 2122 REFERENCE "{ISIS.aoi neighbourSystemType (80)}" 2123 ::= { isisISAdjEntry 6 } 2125 isisISAdjNeighSysID OBJECT-TYPE 2126 SYNTAX OCTET STRING (SIZE(0..9)) 2127 MAX-ACCESS read-only 2128 STATUS current 2129 DESCRIPTION 2130 "The system ID of the neighboring Intermediate System set 2131 from the source ID field of the neighbor's IIH PDUs." 2132 REFERENCE "{ISIS.aoi neighbourSystemIds (83)}" 2133 ::= { isisISAdjEntry 7 } 2135 isisISAdjUsage OBJECT-TYPE 2136 SYNTAX INTEGER { 2137 undefined(1), 2138 level1(2), 2139 level2(3), 2140 level1and2(4) 2141 } 2142 MAX-ACCESS read-only 2143 STATUS current 2144 DESCRIPTION 2145 "The usage of the adjacency. An adjacency of type level1 2146 will be used for level 1 traffic only. An adjacency of 2147 type level2 will be used for level 2 traffic only. An 2148 adjacency of type level1and2 will be used for both level 2149 1 and level 2 traffic. There may be two adjacencies (of 2150 types level1 and level2) between the same pair of 2151 Intermediate Systems." 2152 REFERENCE "{ISIS.aoi adjacencyUsage (82)}" 2153 ::= { isisISAdjEntry 8 } 2155 isisISAdjHoldTimer OBJECT-TYPE 2156 SYNTAX Integer32 (1..65535) 2157 MAX-ACCESS read-only 2158 STATUS current 2159 DESCRIPTION 2160 "The holding time for this adjacency updated from 2161 received IIH PDUs." 2162 REFERENCE "{ISIS.aoi holdingTimer (85)}" 2163 ::= { isisISAdjEntry 9 } 2165 isisISAdjNeighPriority OBJECT-TYPE 2167 SYNTAX ISPriority 2168 MAX-ACCESS read-only 2169 STATUS current 2170 DESCRIPTION 2171 "Priority of the neighboring Intermediate System for 2172 becoming the LAN Level 1 Designated Intermediate System 2173 if the value of isisISAdjNeighSysType is 2174 L1IntermediateSystem or LAN Level 2 Designated 2175 Intermediate System if the value of 2176 isisISAdjNeighSysType is L2IntermediateSystem." 2177 REFERENCE "{ISIS.aoi lANPriority (86)}" 2178 ::= { isisISAdjEntry 10 } 2180 -- The IS Adjacency Area Address Table 2182 -- The IS Adjacency Area Address Table contains the set of 2183 -- Area Addresses of neighboring 2184 -- Intermediate Systems as reported in IIH PDUs. 2186 isisISAdjAreaAddrTable OBJECT-TYPE 2187 SYNTAX SEQUENCE OF IsisISAdjAreaAddrEntry 2188 MAX-ACCESS not-accessible 2189 STATUS current 2190 DESCRIPTION 2191 "This table contains the set of Area Addresses of 2192 neighboring Intermediate Systems as reported in received 2193 IIH PDUs." 2194 REFERENCE "{ISIS.aoi areaAddressesOfNeighbour (84)}" 2195 ::= { isisISAdj 2 } 2197 isisISAdjAreaAddrEntry OBJECT-TYPE 2198 SYNTAX IsisISAdjAreaAddrEntry 2199 MAX-ACCESS not-accessible 2200 STATUS current 2201 DESCRIPTION 2202 "Each entry contains one Area Address reported by a 2203 neighboring Intermediate System in its IIH PDUs." 2204 INDEX { isisISAdjAreaAddrSysInstance, 2205 isisISAdjAreaAddrCircIndex, 2206 isisISAdjAreaAddrAdjIndex, 2207 isisISAdjAreaAddress } 2208 ::= { isisISAdjAreaAddrTable 1 } 2210 IsisISAdjAreaAddrEntry ::= 2211 SEQUENCE { 2212 isisISAdjAreaAddrSysInstance 2213 Integer32, 2214 isisISAdjAreaAddrCircIndex 2215 Integer32, 2216 isisISAdjAreaAddrAdjIndex 2217 Integer32, 2218 isisISAdjAreaAddress 2219 OSINSAddress 2220 } 2222 isisISAdjAreaAddrSysInstance OBJECT-TYPE 2223 SYNTAX Integer32 2224 MAX-ACCESS read-only 2225 STATUS current 2226 DESCRIPTION 2227 "The unique identifier of the Integrated IS-IS instance 2228 to which this row corresponds." 2229 ::= { isisISAdjAreaAddrEntry 1 } 2231 isisISAdjAreaAddrCircIndex OBJECT-TYPE 2232 SYNTAX Integer32 2233 MAX-ACCESS read-only 2234 STATUS current 2235 DESCRIPTION 2236 "The identifier of the Circuit which is the parent of the 2237 IS adjacency to which this Area Address entry 2238 corresponds." 2239 ::= { isisISAdjAreaAddrEntry 2 } 2241 isisISAdjAreaAddrAdjIndex OBJECT-TYPE 2242 SYNTAX Integer32 2243 MAX-ACCESS read-only 2244 STATUS current 2245 DESCRIPTION 2246 "The identifier of the IS adjacency to which this entry 2247 belongs." 2248 ::= { isisISAdjAreaAddrEntry 3 } 2250 isisISAdjAreaAddress OBJECT-TYPE 2251 SYNTAX OSINSAddress 2252 MAX-ACCESS read-only 2253 STATUS current 2254 DESCRIPTION 2255 "One Area Address as reported in IIH PDUs received from 2256 the neighbor." 2257 ::= { isisISAdjAreaAddrEntry 4 } 2259 -- The IS Adjacency IP Group 2261 -- The IS Adjacency IP Group is present if the system supports 2262 -- IP Integrated IS-IS 2264 -- The IS Adjacency IP Address Table 2266 -- The IS Adjacency IP Address Table contains the 2267 -- set of IP Addresses of neighboring Intermediate Systems 2268 -- as reported in received IIH PDUs. 2270 isisISAdjIPAddrTable OBJECT-TYPE 2271 SYNTAX SEQUENCE OF IsisISAdjIPAddrEntry 2272 MAX-ACCESS not-accessible 2273 STATUS current 2274 DESCRIPTION 2275 "This table contains the set of IP Addresses of 2276 neighboring Intermediate Systems as reported in received 2277 IIH PDUs." 2278 ::= { isisISAdj 3 } 2280 isisISAdjIPAddrEntry OBJECT-TYPE 2281 SYNTAX IsisISAdjIPAddrEntry 2282 MAX-ACCESS not-accessible 2283 STATUS current 2284 DESCRIPTION 2285 "Each entry contains one IP Address reported by a 2286 neighboring Intermediate System in its IIH PDUs." 2287 INDEX { isisISAdjIPAddrSysInstance, 2288 isisISAdjIPAddrCircIndex, 2289 isisISAdjIPAddrAdjIndex 2290 } 2291 ::= { isisISAdjIPAddrTable 1 } 2293 IsisISAdjIPAddrEntry ::= 2294 SEQUENCE { 2295 isisISAdjIPAddrSysInstance 2296 Integer32, 2297 isisISAdjIPAddrCircIndex 2298 Integer32, 2299 isisISAdjIPAddrAdjIndex 2300 Integer32, 2301 isisISAdjIPAddress 2302 IpAddress 2303 } 2305 isisISAdjIPAddrSysInstance OBJECT-TYPE 2306 SYNTAX Integer32 2307 MAX-ACCESS read-only 2308 STATUS current 2309 DESCRIPTION 2310 "The unique identifier of the Integrated IS-IS instance 2311 to which this row corresponds." 2312 ::= { isisISAdjIPAddrEntry 1 } 2314 isisISAdjIPAddrCircIndex OBJECT-TYPE 2315 SYNTAX Integer32 2316 MAX-ACCESS read-only 2317 STATUS current 2318 DESCRIPTION 2319 "The identifier of the Circuit which is the parent of the 2320 IS adjacency to which this IP Address entry corresponds." 2321 ::= { isisISAdjIPAddrEntry 2 } 2323 isisISAdjIPAddrAdjIndex OBJECT-TYPE 2324 SYNTAX Integer32 2325 MAX-ACCESS read-only 2326 STATUS current 2327 DESCRIPTION 2328 "The identifier of the IS adjacency to which this entry 2329 belongs." 2330 ::= { isisISAdjIPAddrEntry 3 } 2332 isisISAdjIPAddress OBJECT-TYPE 2333 SYNTAX IpAddress 2334 MAX-ACCESS read-only 2335 STATUS current 2336 DESCRIPTION 2337 "One IP Address as reported in IIH PDUs received from the 2338 neighbor." 2339 ::= { isisISAdjIPAddrEntry 4 } 2341 -- The IS Adjacency Integrated Group 2342 -- 2343 -- The IS Adjacency Integrated Group is present if the system 2344 -- supports Integrated ISIS. 2345 -- 2346 -- 2347 -- The IS Adjacency Protocol Supported Table 2348 -- 2349 -- The IS Adjacency Protocol Supported Table contains the set of 2350 -- protocols supported by neighboring 2351 -- Intermediate Systems as reported in received IIH PDUs. 2352 -- 2353 -- Not supported - jdp 2354 -- 2355 -- 2356 -- The ES Adjacency Group 2357 -- 2358 -- The ES Adjacency Group is present if the system supports 2359 -- reception of ES Hellos 2360 -- The ES Adjacency Table 2361 -- 2362 -- Not supported - jdp 2363 -- 2364 -- 2365 -- The Reachable Address Group 2366 -- 2367 -- The Reachable Address Group is optional. 2368 -- The Reachable Address Table 2369 -- Each entry records information about a reachable address 2370 -- (NSAP or address prefix) manually configured on the system 2371 -- or learned through another protocol. 2373 isisRATable OBJECT-TYPE 2374 SYNTAX SEQUENCE OF IsisRAEntry 2375 MAX-ACCESS not-accessible 2376 STATUS current 2377 DESCRIPTION 2378 "The table of Reachable Addresses to NSAPs or Address 2379 Prefixes." 2380 ::= { isisReachAddr 1 } 2382 isisRAEntry OBJECT-TYPE 2383 SYNTAX IsisRAEntry 2384 MAX-ACCESS not-accessible 2385 STATUS current 2386 DESCRIPTION 2387 "Each entry defines a Reachable Address to a NSAP or 2388 Address Prefix." 2389 INDEX { isisRASysInstance, 2390 isisRACircIndex, 2391 isisRAIndex } 2392 ::= { isisRATable 1 } 2393 IsisRAEntry ::= 2394 SEQUENCE { 2395 isisRASysInstance 2396 Integer32, 2397 isisRACircIndex 2398 Integer32, 2399 isisRAIndex 2400 Integer32, 2401 isisRAExistState 2402 RowStatus, 2403 isisRAOperState 2404 OperState, 2405 isisRAAddrPrefix 2406 NSAPPrefix, 2407 isisRAMapType 2408 INTEGER, 2409 isisRADefMetric 2410 DefaultMetric, 2411 isisRADelMetric 2412 OtherMetric, 2413 isisRAExpMetric 2414 OtherMetric, 2415 isisRAErrMetric 2416 OtherMetric, 2417 isisRADefMetricType 2418 MetricType, 2419 isisRADelMetricType 2420 MetricType, 2421 isisRAExpMetricType 2422 MetricType, 2423 isisRAErrMetricType 2424 MetricType, 2425 isisRASNPAAddress 2426 SNPAAddress, 2427 isisRASNPAMask 2428 SNPAPrefix, 2429 isisRASNPAPrefix 2430 SNPAPrefix, 2431 isisRAType 2432 INTEGER 2433 } 2435 isisRASysInstance OBJECT-TYPE 2437 SYNTAX Integer32 2438 MAX-ACCESS read-only 2439 STATUS current 2440 DESCRIPTION 2441 "The identifier of the Integrated IS-IS instance to which 2442 this row corresponds. This object follows the index and 2443 manualOrAutomatic behaviours." 2444 ::= { isisRAEntry 1 } 2446 isisRACircIndex OBJECT-TYPE 2447 SYNTAX Integer32 2448 MAX-ACCESS read-only 2449 STATUS current 2450 DESCRIPTION 2451 "The identifier of the Circuit over which this 2452 destination is reachable. This object follows the index 2453 and manualOrAutomatic behaviours." 2454 ::= { isisRAEntry 2 } 2456 isisRAIndex OBJECT-TYPE 2457 SYNTAX Integer32 2458 MAX-ACCESS read-only 2459 STATUS current 2460 DESCRIPTION 2461 "The identifier for this isisRAEntry. This value must be 2462 unique amongst all Reachable Addresses on the same parent 2463 Circuit. This object follows the index and 2464 manualOrAutomatic behaviours." 2465 ::= { isisRAEntry 3 } 2467 isisRAExistState OBJECT-TYPE 2468 SYNTAX RowStatus 2469 MAX-ACCESS read-create 2470 STATUS current 2471 DESCRIPTION 2472 "The existence state of this Reachable Address. This 2473 object follows the Row Status behaviours." 2474 DEFVAL { active } 2475 ::= { isisRAEntry 4 } 2477 isisRAOperState OBJECT-TYPE 2478 SYNTAX OperState 2479 MAX-ACCESS read-create 2480 STATUS current 2481 DESCRIPTION 2482 "The operational state of the Reachable Address. This 2483 object follows the operationalState and manualOrAutomatic 2484 behaviours." 2485 DEFVAL { off } 2486 ::= { isisRAEntry 5 } 2488 isisRAAddrPrefix OBJECT-TYPE 2489 SYNTAX NSAPPrefix 2490 MAX-ACCESS read-create 2491 STATUS current 2492 DESCRIPTION 2493 "The destination of this Reachable Address. This is an 2494 Address Prefix. This object follows the 2495 replaceOnlyWhileDisabled and manualOrAutomatic 2496 behaviours." 2497 REFERENCE "{ISIS.aoi addressPrefix (98)}" 2498 ::= { isisRAEntry 6 } 2500 isisRAMapType OBJECT-TYPE 2501 SYNTAX INTEGER { 2502 none (1), 2503 explicit (2), 2504 extractIDI (3), 2505 extractDSP (4) 2506 } 2507 MAX-ACCESS read-create 2508 STATUS current 2509 DESCRIPTION 2510 "The type of mapping to be employed to ascertain the SNPA 2511 Address which should be used in forwarding PDUs for this 2512 Reachable Address prefix. This object follows the 2513 manualOrAutomatic behaviour. The following values of 2514 mapping type are defined: 2515 none: The mapping is null because the neighbor SNPA is 2516 implicit by nature of the subnetwork (e.g. a 2517 point-to-point linkage). 2518 explicit: The subnetwork addresses in the object 2519 isisRASNPAAddress is to be used. 2520 extractIDI: The SNPA is embedded in the IDI of the 2521 destination NSAP Address. The mapping algorithm 2522 extracts the SNPA to be used according to the format 2523 and encoding rules of ISO8473/Add2. This SNPA 2524 extraction algorithm can be used in conjunction with 2525 Reachable Address prefixes from the X.121, F.69, E.163 2526 and E.164 addressing subdomains. 2528 extractDSP: All, or a suffix, of the SNPA is embedded 2529 in the DSP of the destination address. This SNPA 2530 extraction algorithm extracts the embedded subnetwork 2531 addressing information by performing a logical AND of 2532 the isisRASNPAMask object value with the destination 2533 address. The part of the SNPA extracted from the 2534 destination NSAP is appended to the isisRASNPAPrefix 2535 object value to form the next hop subnetwork 2536 addressing information." 2537 REFERENCE "{ISO10589-ISIS.aoi mappingType (107)}" 2538 ::= { isisRAEntry 7 } 2540 isisRADefMetric OBJECT-TYPE 2541 SYNTAX DefaultMetric 2542 MAX-ACCESS read-create 2543 STATUS current 2544 DESCRIPTION 2545 "The default metric value for reaching the specified 2546 prefix over this circuit. This object follows the 2547 manualOrAutomatic behaviour." 2548 REFERENCE "{ISIS.aoi defaultMetric (99)}" 2549 DEFVAL { 20 } 2550 ::= { isisRAEntry 8 } 2552 isisRADelMetric OBJECT-TYPE 2553 SYNTAX OtherMetric 2554 MAX-ACCESS read-create 2555 STATUS current 2556 DESCRIPTION 2557 "The delay metric for reaching the specified prefix over 2558 this circuit. This object follows the manualOrAutomatic 2559 behaviour. The value zero is reserved to indicate that 2560 this metric is not supported." 2561 REFERENCE "{ISIS.aoi delayMetric (100)}" 2562 DEFVAL { 0 } 2563 ::= { isisRAEntry 9 } 2565 isisRAExpMetric OBJECT-TYPE 2566 SYNTAX OtherMetric 2567 MAX-ACCESS read-create 2568 STATUS current 2569 DESCRIPTION 2570 "The expense metric for reaching the specified prefix 2571 over this circuit. This object follows the 2572 manualOrAutomatic behaviour. The value zero is reserved 2573 to indicate that this metric is not supported." 2574 REFERENCE "{ISIS.aoi expenseMetric (101)}" 2575 DEFVAL { 0 } 2576 ::= { isisRAEntry 10 } 2578 isisRAErrMetric OBJECT-TYPE 2579 SYNTAX OtherMetric 2580 MAX-ACCESS read-create 2581 STATUS current 2582 DESCRIPTION 2583 "The error metric for reaching the specified prefix over 2584 this circuit. This object follows the manualOrAutomatic 2585 behaviour. The value zero is reserved to indicate that 2586 this metric is not supported." 2587 REFERENCE "{ISIS.aoi errorMetric (102)}" 2588 DEFVAL { 0 } 2589 ::= { isisRAEntry 11 } 2591 isisRADefMetricType OBJECT-TYPE 2592 SYNTAX MetricType 2593 MAX-ACCESS read-create 2594 STATUS current 2595 DESCRIPTION 2596 "Indicates whether the default metric is internal or 2597 external. This object follows the manualOrAutomatic 2598 behaviour." 2599 REFERENCE "{ISIS.aoi defaultMetricType (103)}" 2600 DEFVAL { internal } 2601 ::= { isisRAEntry 12 } 2603 isisRADelMetricType OBJECT-TYPE 2604 SYNTAX MetricType 2605 MAX-ACCESS read-create 2606 STATUS current 2607 DESCRIPTION 2608 "Indicates whether the delay metric is internal or 2609 external. This object follows the manualOrAutomatic 2610 behaviour." 2611 REFERENCE "{ISO10589-ISIS.aoi delayMetricType (104)}" 2612 DEFVAL { internal } 2613 ::= { isisRAEntry 13 } 2615 isisRAExpMetricType OBJECT-TYPE 2616 SYNTAX MetricType 2617 MAX-ACCESS read-create 2618 STATUS current 2619 DESCRIPTION 2620 "Indicates whether the expense metric is internal or 2621 external. This object follows the manualOrAutomatic 2622 behaviour." 2623 REFERENCE "{ISIS.aoi expenseMetricType (105)}" 2624 DEFVAL { internal } 2625 ::= { isisRAEntry 14 } 2627 isisRAErrMetricType OBJECT-TYPE 2628 SYNTAX MetricType 2629 MAX-ACCESS read-create 2630 STATUS current 2631 DESCRIPTION 2632 "Indicates whether the error metric is internal or 2633 external. This object follows the manualOrAutomatic 2634 behaviour." 2635 REFERENCE "{ISIS.aoi errorMetricType (106)}" 2636 DEFVAL { internal } 2637 ::= { isisRAEntry 15 } 2639 isisRASNPAAddress OBJECT-TYPE 2640 SYNTAX SNPAAddress 2641 MAX-ACCESS read-create 2642 STATUS current 2643 DESCRIPTION 2644 "The SNPA Address to which a PDU may be forwarded in 2645 order to reach a destination which matches the address 2646 prefix of the Reachable Address. This object follows the 2647 manualOrAutomatic behaviour." 2648 REFERENCE "{ISIS.aoi sNPAAddresses (109)}" 2649 -- note only one address may be specified per Reachable Address 2650 -- in the MIB 2651 DEFVAL { ''H } 2652 ::= { isisRAEntry 16 } 2654 isisRASNPAMask OBJECT-TYPE 2655 SYNTAX SNPAPrefix 2656 MAX-ACCESS read-create 2657 STATUS current 2658 DESCRIPTION 2659 "A bit mask with 1 bits indicating the positions in the 2660 effective destination address from which embedded SNPA 2661 information is to be extracted. For the extraction the 2662 first octet of the isisRASNPAMask object value is aligned 2663 with the first octet (AFI) of the NSAP Address. If the 2664 isisRASNPAMask object value and NSAP Address are of 2665 different lengths, the shorter of the two is logically 2666 padded with zeros before performing the extraction. This 2667 object follows the manualOrAutomatic behaviour." 2668 REFERENCE "{ISIS.aoi sNPAMask (122)}" 2669 DEFVAL { ''H } 2670 ::= { isisRAEntry 17 } 2672 isisRASNPAPrefix OBJECT-TYPE 2673 SYNTAX SNPAPrefix 2674 MAX-ACCESS read-create 2675 STATUS current 2676 DESCRIPTION 2677 "A fixed SNPA prefix for use when the isisRAMapType is 2678 extractDSP. The SNPA Address to use is formed by 2679 concatenating the fixed SNPA prefix with a variable SNPA 2680 part that is extracted from the effective destination 2681 address. For Reachable Address prefixes in which the 2682 entire SNPA is embedded in the DSP the SNPA Prefix shall 2683 be null. This object follows the manualOrAutomatic 2684 behaviour." 2685 REFERENCE "{ISIS.aoi sNPAPrefix (123)}" 2686 DEFVAL { ''H } 2687 ::= { isisRAEntry 18 } 2689 isisRAType OBJECT-TYPE 2690 SYNTAX INTEGER 2691 { 2692 manual (1), 2693 automatic (2) 2694 } 2695 MAX-ACCESS read-only 2696 STATUS current 2697 DESCRIPTION 2698 " The type of Reachable address. Those of type 2699 manual are created by the network manager. Those 2700 of type automatic are created through propogation 2701 of routing information from another routing 2702 protocol (eg. IDRP). " 2703 DEFVAL {manual} 2704 ::= {isisRAEntry 19 } 2706 -- The IP Reachable Address Group 2707 -- The IP Reachable Address Group is optional. 2709 -- The IP Reachable Address Table 2711 -- Each entry records information about one IP reachable 2712 -- address manually configured on this system or learned from 2713 -- another protocol. 2715 isisIPRATable OBJECT-TYPE 2716 SYNTAX SEQUENCE OF IsisIPRAEntry 2717 MAX-ACCESS not-accessible 2718 STATUS current 2719 DESCRIPTION 2720 "The table of IP Reachable Addresses to networks, 2721 subnetworks or hosts either manually configured or 2722 learned from another protocol." 2723 ::= { isisIPReachAddr 1 } 2725 isisIPRAEntry OBJECT-TYPE 2726 SYNTAX IsisIPRAEntry 2727 MAX-ACCESS not-accessible 2728 STATUS current 2729 DESCRIPTION 2730 "Each entry defines an IP Reachable Address to a network, 2731 subnetwork or host." 2732 INDEX { isisIPRASysInstance, 2733 isisIPRACircIndex, 2734 isisIPRAType, 2735 isisIPRAIndex } 2736 ::= { isisIPRATable 1 } 2738 IsisIPRAEntry ::= 2739 SEQUENCE { 2740 isisIPRASysInstance 2741 Integer32, 2742 isisIPRACircIndex 2743 Integer32, 2744 isisIPRAIndex 2745 Integer32, 2746 isisIPRAType 2747 INTEGER, 2748 isisIPRADest 2749 IpAddress, 2750 isisIPRAMask 2751 IpAddress, 2752 isisIPRAExistState 2753 RowStatus, 2754 isisIPRAOperState 2755 OperState, 2756 isisIPRADefMetric 2757 DefaultMetric, 2758 isisIPRADelMetric 2759 OtherMetric, 2760 isisIPRAExpMetric 2761 OtherMetric, 2762 isisIPRAErrMetric 2763 OtherMetric, 2764 isisIPRADefMetricType 2765 MetricType, 2766 isisIPRADelMetricType 2767 MetricType, 2768 isisIPRAExpMetricType 2769 MetricType, 2770 isisIPRAErrMetricType 2771 MetricType, 2772 isisIPRASNPAAddress 2773 SNPAAddress 2774 } 2776 isisIPRASysInstance OBJECT-TYPE 2777 SYNTAX Integer32 2778 MAX-ACCESS read-write 2779 STATUS current 2780 DESCRIPTION 2781 "The identifier of the Integrated IS-IS instance to which 2782 this row corresponds. This object follows the index and 2783 manualOrAutomatic behaviours." 2784 ::= { isisIPRAEntry 1 } 2786 isisIPRACircIndex OBJECT-TYPE 2787 SYNTAX Integer32 2788 MAX-ACCESS read-write 2789 STATUS current 2790 DESCRIPTION 2791 "The identifier of the Circuit over which this IP 2792 destination is reachable. This object follows the index 2793 and manualOrAutomatic behaviours." 2794 ::= { isisIPRAEntry 2 } 2795 isisIPRAIndex OBJECT-TYPE 2796 SYNTAX Integer32 2797 MAX-ACCESS read-write 2798 STATUS current 2799 DESCRIPTION 2800 "The identifier for this isisIPRAEntry. This value must 2801 be unique amongst all IP Reachable Addresses on the same 2802 parent Circuit. This object follows the index and 2803 manualOrAutomatic behaviours." 2804 ::= { isisIPRAEntry 3 } 2806 isisIPRAType OBJECT-TYPE 2807 SYNTAX INTEGER 2808 { 2809 manual (1), 2810 automatic (2) 2811 } 2812 MAX-ACCESS read-only 2813 STATUS current 2814 DESCRIPTION 2815 "The type of this IP Reachable Address. Those of type 2816 manual are created by the network manager. Those of type 2817 automatic are created through propagation of routing 2818 information from another routing protocol." 2819 ::= { isisIPRAEntry 4 } 2821 isisIPRADest OBJECT-TYPE 2822 SYNTAX IpAddress 2823 MAX-ACCESS read-write 2824 STATUS current 2825 DESCRIPTION 2826 "The destination of this IP Reachable Address. This is 2827 either a network address, subnetwork address or host 2828 address. This object follows the manualOrAutomatic 2829 behaviour." 2830 ::= { isisIPRAEntry 5 } 2832 isisIPRAMask OBJECT-TYPE 2833 SYNTAX IpAddress 2834 MAX-ACCESS read-write 2835 STATUS current 2836 DESCRIPTION 2837 "The network mask for the IP Address in the isisIPRADest 2838 object. This object follows the manualOrAutomatic 2839 behaviour." 2840 ::= { isisIPRAEntry 6 } 2842 isisIPRAExistState OBJECT-TYPE 2843 SYNTAX RowStatus 2844 MAX-ACCESS read-write 2845 STATUS current 2846 DESCRIPTION 2847 "The state of this IP Reachable Address. This object 2848 follows the ExistenceState and manualOrAutomatic 2849 behaviours." 2850 DEFVAL { active } 2851 ::= { isisIPRAEntry 7 } 2853 isisIPRAOperState OBJECT-TYPE 2854 SYNTAX OperState 2855 MAX-ACCESS read-write 2856 STATUS current 2857 DESCRIPTION 2858 "The operational state of the IP Reachable Address. This 2859 object follows the operationalState and manualOrAutomatic 2860 behaviours." 2861 DEFVAL { off } 2862 ::= { isisIPRAEntry 8 } 2864 isisIPRADefMetric OBJECT-TYPE 2865 SYNTAX DefaultMetric 2866 MAX-ACCESS read-write 2867 STATUS current 2868 DESCRIPTION 2869 "The default metric value for reaching the specified 2870 destination over this circuit. This object follows the 2871 manualOrAutomatic behaviour." 2872 DEFVAL { 20 } 2873 ::= { isisIPRAEntry 9 } 2875 isisIPRADelMetric OBJECT-TYPE 2876 SYNTAX OtherMetric 2877 MAX-ACCESS read-write 2878 STATUS current 2879 DESCRIPTION 2880 "The delay metric value for reaching the specified 2881 destination over this circuit. The value zero is reserved 2882 to mean the metric is not supported. This object follows 2883 the manualOrAutomatic behaviour." 2884 DEFVAL { 0 } 2885 ::= { isisIPRAEntry 10 } 2887 isisIPRAExpMetric OBJECT-TYPE 2888 SYNTAX OtherMetric 2889 MAX-ACCESS read-write 2890 STATUS current 2891 DESCRIPTION 2892 "The expense metric value for reaching the specified 2893 destination over this circuit. The value zero is reserved 2894 to mean the metric is not supported. This object follows 2895 the manualOrAutomatic behaviour." 2896 DEFVAL { 0 } 2897 ::= { isisIPRAEntry 11 } 2899 isisIPRAErrMetric OBJECT-TYPE 2900 SYNTAX OtherMetric 2901 MAX-ACCESS read-write 2902 STATUS current 2903 DESCRIPTION 2904 "The error metric value for reaching the specified 2905 destination over this circuit. The value zero is reserved 2906 to mean the metric is not supported. This object follows 2907 the manualOrAutomatic behaviour." 2908 DEFVAL { 0 } 2909 ::= { isisIPRAEntry 12 } 2911 isisIPRADefMetricType OBJECT-TYPE 2912 SYNTAX MetricType 2913 MAX-ACCESS read-write 2914 STATUS current 2915 DESCRIPTION 2916 "Indicates whether the default metric is internal or 2917 external. This object follows the manualOrAutomatic 2918 behaviour." 2919 DEFVAL { internal } 2920 ::= { isisIPRAEntry 13 } 2922 isisIPRADelMetricType OBJECT-TYPE 2923 SYNTAX MetricType 2924 MAX-ACCESS read-write 2925 STATUS current 2926 DESCRIPTION 2927 "Indicates whether the delay metric is internal or 2928 external. This object follows the manualOrAutomatic 2929 behaviour." 2930 DEFVAL { internal } 2931 ::= { isisIPRAEntry 14 } 2933 isisIPRAExpMetricType OBJECT-TYPE 2934 SYNTAX MetricType 2935 MAX-ACCESS read-write 2936 STATUS current 2937 DESCRIPTION 2938 "Indicates whether the expense metric is internal or 2939 external. This object follows the manualOrAutomatic 2940 behaviour." 2941 DEFVAL { internal } 2942 ::= { isisIPRAEntry 15 } 2944 isisIPRAErrMetricType OBJECT-TYPE 2945 SYNTAX MetricType 2946 MAX-ACCESS read-write 2947 STATUS current 2948 DESCRIPTION 2949 "Indicates whether the error metric is internal or 2950 external. This object follows the manualOrAutomatic 2951 behaviour." 2952 DEFVAL { internal } 2953 ::= { isisIPRAEntry 16 } 2955 isisIPRASNPAAddress OBJECT-TYPE 2956 SYNTAX SNPAAddress 2957 MAX-ACCESS read-write 2958 STATUS current 2959 DESCRIPTION 2960 "The SNPA Address to which a PDU may be forwarded in 2961 order to reach a destination which matches this IP 2962 Reachable Address. This object follows the 2963 manualOrAutomatic behaviour." 2964 DEFVAL { ''H } 2965 ::= { isisIPRAEntry 17 } 2967 -- The Circuit CLNS Group 2968 -- 2969 -- The Circuit CLNS Table contains objects controlling the 2970 -- operation of the IS functions of the CLNS protocol 2971 -- 2972 -- Removed - jdp 2973 -- 2974 END 2975 3. Acknowledgments 2977 This draft MIB is based on March 1994 Internet Draft by Chris 2978 Gunnerr, who should be held blameless for the errors 2979 introduced since then. 2981 We would like to thanks the following individuals for 2982 constructive and valuable comments: 2983 Jeff Gross 2984 Jim Halpin 2985 Dimitri Haskin 2986 Jeff Pickering 2987 Peter Higginson 2989 4. References 2991 [1] "Integrated IS-IS Management Information Base", IETF 2992 Draft, March 1994, Chris Gunner. 2994 [2] Oran, D., Editor, "OSI IS-IS Intra-domain Routing 2995 Protocol", RFC 1142, February 1990 2997 [3] Callon, R., "Use of OSI IS-IS for Routing in TCP/IP and 2998 Dual Environments", RFC 1195, December 1990 3000 5. Security Considerations 3002 Certain management information defined in this MIB may be 3003 considered sensitive in some network environments. 3005 Therefore, authentication of received SNMP requests and 3006 controlled access to management information should be employed 3007 in such environments. 3009 6. Authors' Address 3011 Jeff Parker 3012 Nexabit Networks, Inc. 3013 200 Nickerson Road, 3014 Marlborough, MA 01752 3015 email: jparker@nexabit.com 3017 7. Full Copyright Statement 3019 Copyright (C) The Internet Society (1997). All Rights 3020 Reserved. 3022 This document and translations of it may be copied and 3023 furnished to others, and derivative works that comment on or 3024 otherwise explain it or assist in its implementation may be 3025 prepared, copied, published and distributed, in whole or in 3026 part, without restriction of any kind, provided that the above 3027 copyright notice and this paragraph are included on all such 3028 copies and derivative works. However, this document itself 3029 may not be modified in any way, such as by removing the 3030 copyright notice or references to the Internet Society or 3031 other Internet organizations, except as needed for the purpose 3032 of developing Internet standards in which case the procedures 3033 for copyrights defined in the Internet Standards process must 3034 be followed, or as required to translate it into languages 3035 other than English. 3037 The limited permissions granted above are perpetual and will 3038 not be revoked by the Internet Society or its successors or 3039 assigns. 3041 This document and the information contained herein is provided 3042 on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET 3043 ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR 3044 IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE 3045 USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR 3046 ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 3047 PARTICULAR PURPOSE."