idnits 2.17.1 draft-ietf-lmap-information-model-15.txt: Checking boilerplate required by RFC 5378 and the IETF Trust (see https://trustee.ietf.org/license-info): ---------------------------------------------------------------------------- No issues found here. Checking nits according to https://www.ietf.org/id-info/1id-guidelines.txt: ---------------------------------------------------------------------------- No issues found here. Checking nits according to https://www.ietf.org/id-info/checklist : ---------------------------------------------------------------------------- == There are 1 instance of lines with non-RFC2606-compliant FQDNs in the document. Miscellaneous warnings: ---------------------------------------------------------------------------- == The copyright year in the IETF Trust and authors Copyright Line does not match the current year == Line 703 has weird spacing: '...ion-obj ma-in...' == Line 892 has weird spacing: '...ask-obj ma-ca...' == Line 938 has weird spacing: '...ace-obj ma-...' == Line 940 has weird spacing: '...ion-obj ma-st...' == Line 974 has weird spacing: '...ion-obj ma-...' == (7 more instances...) -- The document date (January 11, 2017) is 2655 days in the past. Is this intentional? Checking references for intended status: Proposed Standard ---------------------------------------------------------------------------- (See RFCs 3967 and 4897 for information about using normative references to lower-maturity documents in RFCs) ** Downref: Normative reference to an Informational RFC: RFC 7594 == Outdated reference: A later version (-24) exists of draft-ietf-ippm-metric-registry-10 == Outdated reference: A later version (-12) exists of draft-ietf-lmap-yang-08 Summary: 1 error (**), 0 flaws (~~), 10 warnings (==), 1 comment (--). Run idnits with the --verbose option for more detailed information about the items above. -------------------------------------------------------------------------------- 2 Network Working Group T. Burbridge 3 Internet-Draft P. Eardley 4 Intended status: Standards Track BT 5 Expires: July 15, 2017 M. Bagnulo 6 Universidad Carlos III de Madrid 7 J. Schoenwaelder 8 Jacobs University Bremen 9 January 11, 2017 11 Information Model for Large-Scale Measurement Platforms (LMAP) 12 draft-ietf-lmap-information-model-15 14 Abstract 16 This Information Model applies to the Measurement Agent within a 17 Large-Scale Measurement Platform. As such it outlines the 18 information that is (pre-)configured on the Measurement Agent or 19 exists in communications with a Controller or Collector within an 20 LMAP framework. The purpose of such an Information Model is to 21 provide a protocol and device independent view of the Measurement 22 Agent that can be implemented via one or more Control and Report 23 protocols. 25 Requirements Language 27 The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", 28 "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this 29 document are to be interpreted as described in RFC 2119 [RFC2119]. 31 Status of This Memo 33 This Internet-Draft is submitted in full conformance with the 34 provisions of BCP 78 and BCP 79. 36 Internet-Drafts are working documents of the Internet Engineering 37 Task Force (IETF). Note that other groups may also distribute 38 working documents as Internet-Drafts. The list of current Internet- 39 Drafts is at http://datatracker.ietf.org/drafts/current/. 41 Internet-Drafts are draft documents valid for a maximum of six months 42 and may be updated, replaced, or obsoleted by other documents at any 43 time. It is inappropriate to use Internet-Drafts as reference 44 material or to cite them other than as "work in progress." 46 This Internet-Draft will expire on July 15, 2017. 48 Copyright Notice 50 Copyright (c) 2017 IETF Trust and the persons identified as the 51 document authors. All rights reserved. 53 This document is subject to BCP 78 and the IETF Trust's Legal 54 Provisions Relating to IETF Documents 55 (http://trustee.ietf.org/license-info) in effect on the date of 56 publication of this document. Please review these documents 57 carefully, as they describe your rights and restrictions with respect 58 to this document. Code Components extracted from this document must 59 include Simplified BSD License text as described in Section 4.e of 60 the Trust Legal Provisions and are provided without warranty as 61 described in the Simplified BSD License. 63 Table of Contents 65 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 66 2. Notation . . . . . . . . . . . . . . . . . . . . . . . . . . 5 67 3. LMAP Information Model . . . . . . . . . . . . . . . . . . . 5 68 3.1. Pre-Configuration Information . . . . . . . . . . . . . . 9 69 3.1.1. Definition of ma-preconfig-obj . . . . . . . . . . . 10 70 3.2. Configuration Information . . . . . . . . . . . . . . . . 10 71 3.2.1. Definition of ma-config-obj . . . . . . . . . . . . . 12 72 3.3. Instruction Information . . . . . . . . . . . . . . . . . 13 73 3.3.1. Definition of ma-instruction-obj . . . . . . . . . . 15 74 3.3.2. Definition of ma-suppression-obj . . . . . . . . . . 16 75 3.4. Logging Information . . . . . . . . . . . . . . . . . . . 17 76 3.4.1. Definition of ma-log-obj . . . . . . . . . . . . . . 19 77 3.5. Capability and Status Information . . . . . . . . . . . . 19 78 3.5.1. Definition of ma-capability-obj . . . . . . . . . . . 19 79 3.5.2. Definition of ma-capability-task-obj . . . . . . . . 20 80 3.5.3. Definition of ma-status-obj . . . . . . . . . . . . . 20 81 3.5.4. Definition of ma-status-schedule-obj . . . . . . . . 21 82 3.5.5. Definition of ma-status-action-obj . . . . . . . . . 22 83 3.5.6. Definition of ma-status-suppression-obj . . . . . . . 25 84 3.5.7. Definition of ma-status-interface-obj . . . . . . . . 25 85 3.6. Reporting Information . . . . . . . . . . . . . . . . . . 26 86 3.6.1. Definition of ma-report-obj . . . . . . . . . . . . . 28 87 3.6.2. Definition of ma-report-result-obj . . . . . . . . . 28 88 3.6.3. Definition of ma-report-conflict-obj . . . . . . . . 30 89 3.6.4. Definition of ma-report-table-obj . . . . . . . . . . 31 90 3.6.5. Definition of ma-report-row-obj . . . . . . . . . . . 31 91 3.7. Common Objects: Schedules . . . . . . . . . . . . . . . . 31 92 3.7.1. Definition of ma-schedule-obj . . . . . . . . . . . . 33 93 3.7.2. Definition of ma-action-obj . . . . . . . . . . . . . 34 94 3.8. Common Objects: Channels . . . . . . . . . . . . . . . . 35 95 3.8.1. Definition of ma-channel-obj . . . . . . . . . . . . 36 97 3.9. Common Objects: Task Configurations . . . . . . . . . . . 36 98 3.9.1. Definition of ma-task-obj . . . . . . . . . . . . . . 38 99 3.9.2. Definition of ma-option-obj . . . . . . . . . . . . . 38 100 3.10. Common Objects: Registry Information . . . . . . . . . . 39 101 3.10.1. Definition of ma-registry-obj . . . . . . . . . . . 39 102 3.11. Common Objects: Event Information . . . . . . . . . . . . 39 103 3.11.1. Definition of ma-event-obj . . . . . . . . . . . . . 40 104 3.11.2. Definition of ma-periodic-obj . . . . . . . . . . . 42 105 3.11.3. Definition of ma-calendar-obj . . . . . . . . . . . 42 106 3.11.4. Definition of ma-one-off-obj . . . . . . . . . . . . 44 107 3.11.5. Definition of ma-immediate-obj . . . . . . . . . . . 45 108 3.11.6. Definition of ma-startup-obj . . . . . . . . . . . . 45 109 3.11.7. Definition of ma-controller-lost-obj . . . . . . . . 45 110 3.11.8. Definition of ma-controller-connected-obj . . . . . 45 111 4. Example Execution . . . . . . . . . . . . . . . . . . . . . . 46 112 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 47 113 6. Security Considerations . . . . . . . . . . . . . . . . . . . 48 114 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 48 115 8. References . . . . . . . . . . . . . . . . . . . . . . . . . 49 116 8.1. Normative References . . . . . . . . . . . . . . . . . . 49 117 8.2. Informative References . . . . . . . . . . . . . . . . . 49 118 Appendix A. Change History . . . . . . . . . . . . . . . . . . . 49 119 A.1. Non-editorial changes since -13 . . . . . . . . . . . . . 50 120 A.2. Non-editorial changes since -12 . . . . . . . . . . . . . 50 121 A.3. Non-editorial changes since -11 . . . . . . . . . . . . . 50 122 A.4. Non-editorial changes since -10 . . . . . . . . . . . . . 50 123 A.5. Non-editorial changes since -09 . . . . . . . . . . . . . 50 124 A.6. Non-editorial changes since -08 . . . . . . . . . . . . . 51 125 A.7. Non-editorial changes since -07 . . . . . . . . . . . . . 51 126 A.8. Non-editorial changes since -06 . . . . . . . . . . . . . 51 127 A.9. Non-editorial changes since -05 . . . . . . . . . . . . . 52 128 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 52 130 1. Introduction 132 A large-scale measurement platform is a collection of components that 133 work in a coordinated fashion to perform measurements from a large 134 number of vantage points. The main components of a large-scale 135 measurement platform are the Measurement Agents (hereafter MAs), the 136 Controller(s) and the Collector(s). 138 The MAs are the elements actually performing the measurements. The 139 MAs are controlled by exactly one Controller at a time and the 140 Collectors gather the results generated by the MAs. In a nutshell, 141 the normal operation of a large-scale measurement platform starts 142 with the Controller instructing a set of one or more MAs to perform a 143 set of one or more Measurement Tasks at a certain point in time. The 144 MAs execute the instructions from a Controller, and once they have 145 done so, they report the results of the measurements to one or more 146 Collectors. The overall framework for a Large Measurement platform 147 as used in this document is described in detail in [RFC7594]. 149 A large-scale measurement platform involves basically three types of 150 protocols, namely, a Control protocol (or protocols) between a 151 Controller and the MAs, a Report protocol (or protocols) between the 152 MAs and the Collector(s) and several measurement protocols between 153 the MAs and Measurement Peers (MPs), used to actually perform the 154 measurements. In addition some information is required to be 155 configured on the MA prior to any communication with a Controller. 157 This document defines the information model for both Control and the 158 Report protocols along with pre-configuration information that is 159 required on the MA before communicating with the Controller, broadly 160 named as the LMAP Information Model. The measurement protocols are 161 out of the scope of this document. 163 As defined in [RFC3444], the LMAP Information Model defines the 164 concepts involved in a large-scale measurement platform at a high 165 level of abstraction, independent of any specific implementation or 166 actual protocol used to exchange the information. It is expected 167 that the proposed information model can be used with different 168 protocols in different measurement platform architectures and across 169 different types of MA devices (e.g., home gateway, smartphone, PC, 170 router). A YANG data model implementing the information model can be 171 found in [I-D.ietf-lmap-yang]. 173 The definition of an Information Model serves a number of purposes: 175 1. To guide the standardisation of one or more Control and Report 176 protocols and data models 178 2. To enable high-level inter-operability between different Control 179 and Report protocols by facilitating translation between their 180 respective data models such that a Controller could instruct sub- 181 populations of MAs using different protocols 183 3. To form agreement of what information needs to be held by an MA 184 and passed over the Control and Report interfaces and support the 185 functionality described in the LMAP framework 187 4. To enable existing protocols and data models to be assessed for 188 their suitability as part of a large-scale measurement system 190 2. Notation 192 This document uses a programming language-like notation to define the 193 properties of the objects of the information model. An optional 194 property is enclosed by square brackets, [ ], and a list property is 195 indicated by two numbers in angle brackets, , where m indicates 196 the minimal number of values, and n is the maximum. The symbol * for 197 n means no upper bound. 199 3. LMAP Information Model 201 The information described herein relates to the information stored, 202 received or transmitted by a Measurement Agent as described within 203 the LMAP framework [RFC7594]. As such, some subsets of this 204 information model are applicable to the measurement Controller, 205 Collector and any device management system that pre-configures the 206 Measurement Agent. The information described in these models will be 207 transmitted by protocols using interfaces between the Measurement 208 Agent and such systems according to a Data Model. 210 For clarity the information model is divided into six sections: 212 1. Pre-Configuration Information. Information pre-configured on the 213 Measurement Agent prior to any communication with other 214 components of the LMAP architecture (i.e., the Controller, 215 Collector and Measurement Peers), specifically detailing how to 216 communicate with a Controller and whether the device is enabled 217 to participate as an MA. 219 2. Configuration Information. Update of the pre-configuration 220 information during the registration of the MA or subsequent 221 communication with the Controller, along with the configuration 222 of further parameters about the MA (rather than the Measurement 223 Tasks it should perform) that were not mandatory for the initial 224 communication between the MA and a Controller. 226 3. Instruction Information. Information that is received by the MA 227 from the Controller pertaining to the Measurement Tasks that 228 should be executed. This includes the task execution Schedules 229 (other than the Controller communication Schedule supplied as 230 (pre)configuration information) and related information such as 231 the Task Configuration, communication Channels to Collectors and 232 schedule Event and Timing information. It also includes Task 233 Suppression information that is used to over-ride normal Task 234 execution. 236 4. Logging Information. Information transmitted from the MA to the 237 Controller detailing the results of any configuration operations 238 along with error and status information from the operation of the 239 MA. 241 5. Capability and Status Information. Information on the general 242 status and capabilities of the MA. For example, the set of 243 measurements that are supported on the device. 245 6. Reporting Information. Information transmitted from the MA to 246 one or more Collectors including measurement results and the 247 context in which they were conducted. 249 In addition the MA may hold further information not described herein, 250 and which may be optionally transferred to or from other systems 251 including the Controller and Collector. One example of information 252 in this category is subscriber or line information that may be 253 extracted by a task and reported by the MA in the reporting 254 communication to a Collector. 256 It should also be noted that the MA may be in communication with 257 other management systems which may be responsible for configuring and 258 retrieving information from the MA device. Such systems, where 259 available, can perform an important role in transferring the pre- 260 configuration information to the MA or enabling/disabling the 261 measurement functionality of the MA. 263 The Information Model is divided into sub-sections for a number of 264 reasons. Firstly the grouping of information facilitates reader 265 understanding. Secondly, the particular groupings chosen are 266 expected to map to different protocols or different transmissions 267 within those protocols. 269 The granularity of data transmitted in each operation of the Control 270 and Report Protocols is not dictated by the Information Model. For 271 example, the Instruction object may be delivered in a single 272 operation. Alternatively, Schedules and Task Configurations may be 273 separated or even each Schedule/Task Configuration may be delivered 274 individually. Similarly the Information Model does not dictate 275 whether data is read, write, or read/write. For example, some 276 Control Protocols may have the ability to read back Configuration and 277 Instruction information which have been previously set on the MA. 278 Lastly, while some protocols may simply overwrite information (for 279 example refreshing the entire Instruction Information), other 280 protocols may have the ability to update or delete selected items of 281 information. 283 The information in these six sections is captured by a number of 284 common information objects. These objects are also described later 285 in this document and comprise of: 287 1. Schedules. A set of Schedules tells the MA to do something. 288 Without a Schedule no Task (from a measurement to reporting or 289 communicating with the Controller) is ever executed. Schedules 290 are used within the Instruction to specify what tasks should be 291 performed, when, and how to direct their results. A Schedule is 292 also used within the pre-Configuration and Configuration 293 information in order to execute the Task or Tasks required to 294 communicate with the Controller. A specific Schedule can only be 295 active once. Attempts to start a Schedule while the same 296 Schedule is still running will fail. 298 2. Channels. A set of Channel objects are used to communicate with 299 a number of endpoints (i.e., the Controller and Collectors). 300 Each Channel object contains the information required for the 301 communication with a single endpoint such as the target location 302 and security details. 304 3. Task Configurations. A set of Task Configurations is used to 305 configure the Tasks that are run by the MA. This includes the 306 registry entries for the Task and any configuration parameters, 307 represented as Task Options. Task Configurations are referenced 308 from a Schedule in order to specify what Tasks the MA should 309 execute. 311 4. Events. A set of Event objects that can be referenced from the 312 Schedules. Each Schedule always references exactly one Event 313 object that determines when the schedule is executed. An Event 314 object specifies either a singleton or series of events that 315 indicate when Tasks should be executed. A commonly used kind of 316 Event objects are Timing objects. 318 Figure 1 illustrates the structure in which these common information 319 objects are referenced. The references are achieved by each object 320 (Task Configuration, Event) being given a short textual name that is 321 used by other objects. The objects shown in parenthesis are part of 322 the internal object structure of a Schedule. Channels are not shown 323 in the diagram since they are only used as an option by selected Task 324 Configurations but are similarly referenced using a short text name. 326 Schedule 327 |-- triggered by --> Event 328 | 329 |-- executes --> Action 1 330 | |-- using --> Task Configuration 331 | | 332 | `-- feeding to --> Destination Schedule 333 : 334 : 335 `-- executes --> Action N 336 |-- using --> Task Configuration 337 | 338 `-- feeding to --> Destination Schedule 340 Figure 1: Relationship between Schedules, Events, Actions, Task 341 Configurations, and Destination Schedules 343 The primary function of an MA is to execute Schedules. Every Action 344 contained in a Schedule is defined as a Task. As such, these Actions 345 are configured through Task Configurations and executed according to 346 the Event object referenced by the Schedule in which they appear. 347 Note, however, that Actions can have Action specific parameters. 349 Tasks can implement a variety of different types of Actions. While 350 in terms of the Information Model, all Tasks have the same structure, 351 it can help conceptually to think of different Task categories: 353 1. Measurement Tasks measure some aspect of network performance or 354 traffic. They may also capture contextual information from the 355 MA device or network interfaces such as the device type or 356 interface speed. 358 2. Data Transfer Tasks support the communication with a Controller 359 and Collectors: 361 A. Reporting Tasks report the results of Measurement Tasks to 362 Collectors 364 B. Control Task(s) implement the Control Protocol and 365 communicate with the Controller. 367 3. Data Analysis Tasks can exist to analyse data from other 368 Measurement Tasks locally on the MA 370 4. Data Management Tasks may exist to clean-up, filter or compress 371 data on the MA such as Measurement Task results 373 Figure 1 indicates that Actions can produce data that is fed into 374 Destination Schedules. This can by used by Actions implementing 375 Measurement Tasks to feed measurement results to a Schedule that 376 triggers Actions implementing Reporting Tasks. Data fed to a 377 Destination Schedule is consumed by the first Action of the 378 Destination Schedule if the Destination Schedule is using sequential 379 or pipelined execution mode and it is consumed by all Actions of the 380 Destination Schedule if the Destination Schedule is using parallel 381 execution mode. 383 3.1. Pre-Configuration Information 385 This information is the minimal information that needs to be pre- 386 configured to the MA in order for it to successfully communicate with 387 a Controller during the registration process. Some of the Pre- 388 Configuration Information elements are repeated in the Configuration 389 Information in order to allow an LMAP Controller to update these 390 items. The pre-configuration information also contains some elements 391 that are not under the control of the LMAP framework (such as the 392 device identifier and device security credentials). 394 This Pre-Configuration Information needs to include a URL of the 395 initial Controller from where configuration information can be 396 communicated along with the security information required for the 397 communication including the certificate of the Controller (or the 398 certificate of the Certification Authority which was used to issue 399 the certificate for the Controller). All this is expressed as a 400 Channel. While multiple Channels may be provided in the Pre- 401 Configuration Information they must all be associated with a single 402 Controller (e.g., over different interfaces or network protocols). 404 Where the MA pulls information from the Controller, the Pre- 405 Configuration Information also needs to contain the timing of the 406 communication with the Controller as well as the nature of the 407 communication itself (such as the protocol and data to be 408 transferred). The timing is represented as an Event that invokes a 409 Schedule that executes the Task(s) responsible for communication with 410 the Controller. It is this Task (or Tasks) that implement the 411 Control protocol between the MA and the Controller and utilises the 412 Channel information. The Task(s) may take additional parameters, as 413 defined by a Task Configuration. 415 Even where information is pushed to the MA from the Controller 416 (rather than pulled by the MA), a Schedule still needs to be 417 supplied. In this case the Schedule will simply execute a Controller 418 listener Task when the MA is started. A Channel is still required 419 for the MA to establish secure communication with the Controller. 421 It can be seen that these Channels, Schedules and Task Configurations 422 for the initial MA-Controller communication are no different in terms 423 of the Information Model to any other Channel, Schedule or Task 424 Configuration that might execute a Measurement Task or report the 425 measurement results (as described later). 427 The MA may be pre-configured with an MA ID, or may use a Device ID in 428 the first Controller contact before it is assigned an MA ID. The 429 Device ID may be a MAC address or some other device identifier 430 expressed as a URI. If the MA ID is not provided at this stage then 431 it must be provided by the Controller during Configuration. 433 3.1.1. Definition of ma-preconfig-obj 435 object { 436 [uuid ma-preconfig-agent-id;] 437 ma-task-obj ma-preconfig-control-tasks<1..*>; 438 ma-channel-obj ma-preconfig-control-channels<1..*>; 439 ma-schedule-obj ma-preconfig-control-schedules<1..*>; 440 [uri ma-preconfig-device-id;] 441 credentials ma-preconfig-credentials; 442 } ma-preconfig-obj; 444 The ma-preconfig-obj describes information that needs to be available 445 to the MA in order to bootstrap communication with a Controller. The 446 ma-preconfig-obj consists of the following elements: 448 ma-preconfig-agent-id: An optional uuid uniquely identifying 449 the measurement agent. 451 ma-preconfig-control-tasks: An unordered set of tasks objects. 453 ma-preconfig-control-channels: An unordered set of channel objects. 455 ma-preconfig-control-schedules: An unordered set of scheduling 456 objects. 458 ma-preconfig-device-id: An optional identifier for the 459 device. 461 ma-preconfig-credentials: The security credentials used by the 462 measurement agent. 464 3.2. Configuration Information 466 During registration or at any later point at which the MA contacts 467 the Controller (or vice-versa), the choice of Controller, details for 468 the timing of communication with the Controller or parameters for the 469 communication Task(s) can be changed (as captured by the Channels, 470 Schedules and Task Configurations objects). For example the pre- 471 configured Controller (specified as a Channel or Channels) may be 472 over-ridden with a specific Controller that is more appropriate to 473 the MA device type, location or characteristics of the network (e.g., 474 access technology type or broadband product). The initial 475 communication Schedule may be over-ridden with one more relevant to 476 routine communications between the MA and the Controller. 478 While some Control protocols may only use a single Schedule, other 479 protocols may use several Schedules (and related data transfer Tasks) 480 to update the Configuration Information, transfer the Instruction 481 Information, transfer Capability and Status Information and send 482 other information to the Controller such as log or error 483 notifications. Multiple Channels may be used to communicate with the 484 same Controller over multiple interfaces (e.g., to send logging 485 information over a different network). 487 In addition the MA will be given further items of information that 488 relate specifically to the MA rather than the measurements it is to 489 conduct or how to report results. The assignment of an ID to the MA 490 is mandatory. If the MA Agent ID was not optionally provided during 491 the pre-configuration then one must be provided by the Controller 492 during Configuration. Optionally a Group ID may also be given which 493 identifies a group of interest to which that MA belongs. For example 494 the group could represent an ISP, broadband product, technology, 495 market classification, geographic region, or a combination of 496 multiple such characteristics. Additional flags control whether the 497 MA ID or the Group ID are included in Reports. The reporting of a 498 Group ID without the MA ID allows the MA to remain anonymous, which 499 may be particularly useful to prevent tracking of mobile MA devices. 501 Optionally an MA can also be configured to stop executing any 502 Instruction Schedule if the Controller is unreachable. This can be 503 used as a fail-safe to stop Measurement and other Tasks being 504 conducted when there is doubt that the Instruction Information is 505 still valid. This is simply represented as a time window in seconds 506 since the last communication with the Controller after which an Event 507 is generated that can trigger the suspension of Instruction 508 Schedules. The appropriate value of the time window will depend on 509 the specified communication Schedule with the Controller and the 510 duration for which the system is willing to tolerate continued 511 operation with potentially stale Instruction Information. 513 While Pre-Configuration Information is persistent upon device reset 514 or power cycle, the persistency of the Configuration Information may 515 be device dependent. Some devices may revert back to their pre- 516 configuration state upon reboot or factory reset, while other devices 517 may store all Configuration and Instruction information in persistent 518 storage. A Controller can check whether an MA has the latest 519 Configuration and Instruction information by examining the Capability 520 and Status information for the MA. 522 3.2.1. Definition of ma-config-obj 524 object { 525 uuid ma-config-agent-id; 526 ma-task-obj ma-config-control-tasks<1..*>; 527 ma-channel-obj ma-config-control-channels<1..*>; 528 ma-schedule-obj ma-config-control-schedules<1..*>; 529 credentials ma-config-credentials; 530 [string ma-config-group-id;] 531 [string ma-config-measurement-point;] 532 [boolean ma-config-report-agent-id;] 533 [boolean ma-config-report-group-id;] 534 [boolean ma-config-report-measurement-point;] 535 [int ma-config-controller-timeout;] 536 } ma-config-obj; 538 The ma-config-obj consists of the following elements: 540 ma-config-agent-id: A uuid uniquely identifying the 541 measurement agent. 543 ma-config-control-tasks: An unordered set of task objects. 545 ma-config-control-channels: An unordered set of channel 546 objects. 548 ma-config-control-schedules: An unordered set of scheduling 549 objects. 551 ma-config-credentials: The security credentials used by 552 the measurement agent. 554 ma-config-group-id: An optional identifier of the 555 group of measurement agents this 556 measurement agent belongs to. 558 ma-config-measurement-point: An optional identifier for the 559 measurement point indicating 560 where the measurement agent is 561 located on a path (see [RFC7398] 562 for further details). 564 ma-config-report-agent-id: An optional flag indicating 565 whether the agent identifier (ma- 566 config-agent-id) is included in 567 reports. The default value is 568 true. 570 ma-config-report-group-id: An optional flag indicating 571 whether the group identifier (ma- 572 config-group-id) is included in 573 reports. The default value is 574 false. 576 ma-config-report-measurement-point: An optional flag indicating 577 whether the measurement point 578 (ma-config-measurement-point) 579 should be included in reports. 580 The default value is false. 582 ma-config-controller-timeout: A timer is started after each 583 successful contact with a 584 controller. When the timer 585 reaches the controller-timeout 586 (measured in seconds), an event 587 is raised indicating that 588 connectivity to the controller 589 has been lost (see ma-controller- 590 lost-obj). 592 3.3. Instruction Information 594 The Instruction information model has four sub-elements: 596 1. Instruction Task Configurations 598 2. Report Channels 600 3. Instruction Schedules 602 4. Suppression 604 The Instruction supports the execution of all Tasks on the MA except 605 those that deal with communication with the Controller (specified in 606 (pre-)configuration information). The Tasks are configured in 607 Instruction Task Configurations and included by reference in the 608 Actions of Instruction Schedules that specify when to execute them. 609 The results can be communicated to other Schedules or a Task may 610 implement a Reporting Protocol and communicate results over Report 611 Channels. Suppression is used to temporarily stop the execution of 612 new Tasks as specified by the Instruction Schedules (and optionally 613 to stop ongoing Tasks). 615 A Task Configuration is used to configure the mandatory and optional 616 parameters of a Task. It also serves to instruct the MA about the 617 Task including the ability to resolve the Task to an executable and 618 specifying the schema for the Task parameters. 620 A Report Channel defines how to communicate with a single remote 621 system specified by a URL. A Report Channel is used to send results 622 to a single Collector but is no different in terms of the Information 623 Model to the Control Channel used to transfer information between the 624 MA and the Controller. Several Report Channels can be defined to 625 enable results to be split or duplicated across different 626 destinations. A single Channel can be used by multiple (reporting) 627 Task Configurations to transfer data to the same Collector. A single 628 Reporting Task Configuration can also be included in multiple 629 Schedules. E.g., a single Collector may receive data at three 630 different cycle rates, one Schedule reporting hourly, another 631 reporting daily and a third specifying that results should be sent 632 immediately for on-demand measurement tasks. Alternatively multiple 633 Report Channels can be used to send Measurement Task results to 634 different Collectors. The details of the Channel element is 635 described later as it is common to several objects. 637 Instruction Schedules specify which Actions to execute according to a 638 given triggering Event. An Action is a Task with additional specific 639 parameters. An Event can trigger the execution of a single Action or 640 it can trigger a repeated series of Actions. The Schedule also 641 specifies how to link Tasks output data to other Schedules. 643 Measurement Suppression information is used to over-ride the 644 Instruction Schedule and temporarily stop measurements or other Tasks 645 from running on the MA for a defined or indefinite period. While 646 conceptually measurements can be stopped by simply removing them from 647 the Measurement Schedule, splitting out separate information on 648 Measurement Suppression allows this information to be updated on the 649 MA on a different timing cycle or protocol implementation to the 650 Measurement Schedule. It is also considered that it will be easier 651 for a human operator to implement a temporary explicit suppression 652 rather than having to move to a reduced Schedule and then roll-back 653 at a later time. 655 It should be noted that control schedules and tasks cannot be 656 suppressed as evidenced by the lack of suppression information in the 657 Configuration. The control schedule must only reference tasks listed 658 as control tasks (i.e., within the Configuration information). 660 A single Suppression object is able to enable/disable a set of 661 Instruction Tasks that are tagged for suppression. This enabled fine 662 grained control on which Tasks are suppressed. Suppression of both 663 matching Actions and Measurement Schedules is supported. Support for 664 disabling specific Actions allows malfunctioning or mis-configured 665 Tasks or Actions that have an impact on a particular part of the 666 network infrastructure (e.g., a particular Measurement Peer) to be 667 targeted. Support for disabling specific Schedules allows for 668 particularly heavy cycles or sets of less essential Measurement Tasks 669 to be suppressed quickly and effectively. Note that Suppression has 670 no effect on either Controller Tasks or Controller Schedules. 672 Suppression stops new Tasks from executing. In addition, the 673 Suppression information also supports an additional Boolean that is 674 used to select whether on-going tasks are also to be terminated. 676 Unsuppression is achieved through either overwriting the Measurement 677 Suppression information (e.g., changing 'enabled' to False) or 678 through the use of an End time such that the Measurement Suppression 679 will no longer be in effect beyond this time. The datetime format 680 used for all elements in the information model (e.g., the suppression 681 start and end dates) MUST conform to RFC 3339 [RFC3339]. 683 The goal when defining these four different elements is to allow each 684 part of the information model to change without affecting the other 685 three elements. For example it is envisaged that the Report Channels 686 and the set of Task Configurations will be relatively static. The 687 Instruction Schedule, on the other hand, is likely to be more 688 dynamic, as the measurement panel and test frequency are changed for 689 various business goals. Another example is that measurements can be 690 suppressed with a Suppression command without removing the existing 691 Instruction Schedules that would continue to apply after the 692 Suppression expires or is removed. In terms of the Controller-MA 693 communication this can reduce the data overhead. It also encourages 694 the re-use of the same standard Task Configurations and Reporting 695 Channels to help ensure consistency and reduce errors. 697 3.3.1. Definition of ma-instruction-obj 699 object { 700 ma-task-obj ma-instruction-tasks<0..*>; 701 ma-channel-obj ma-instruction-channels<0..*>; 702 ma-schedule-obj ma-instruction-schedules<0..*>; 703 [ma-suppression-obj ma-instruction-suppressions<0..*>;] 704 } ma-instruction-obj; 706 An ma-instruction-obj consists of the following elements: 708 ma-instruction-tasks: A possibly empty unordered set of task 709 objects. 711 ma-instruction-channels: A possibly empty unordered set of 712 channel objects. 714 ma-instruction-schedules: A possibly empty unordered set of 715 schedule objects. 717 ma-instruction-suppressions: An optional possibly empty unordered 718 set of suppression objects. 720 3.3.2. Definition of ma-suppression-obj 722 object { 723 string ma-suppression-name; 724 [ma-event-obj ma-suppression-start;] 725 [ma-event-obj ma-suppression-end;] 726 [string ma-suppression-match<0..*>;] 727 [boolean ma-suppression-stop-running;] 728 } ma-suppression-obj; 730 The ma-suppression-obj controls the suppression of schedules or 731 actions and consists of the following elements: 733 ma-suppression-name: A name uniquely identifying a 734 suppression. 736 ma-suppression-start: The optional event indicating when 737 suppression starts. If not present, 738 the suppression starts immediately, 739 i.e., as if the value would be 740 'immediate'. 742 ma-suppression-end: The optional event indicating when 743 suppression ends. If not present, the 744 suppression does not have a defined 745 end, i.e., the suppression remains for 746 an indefinite period of time. 748 ma-suppression-match: An optional and possibly empty 749 unordered set of match patterns. The 750 suppression will apply to all schedules 751 (and their actions) that have a 752 matching value in their ma-schedule- 753 suppression-tags and all actions that 754 have a matching value in their ma- 755 action-suppression-tags. Pattern 756 matching is done using glob style 757 pattern (see below). 759 ma-suppression-stop-running: An optional boolean indicating whether 760 suppression will stop any running 761 matching schedules or actions. The 762 default value for this boolean is 763 false. 765 Glob style pattern matching is following POSIX.2 fnmatch() without 766 special treatment of file paths: 768 * matches a sequence of characters 769 ? matches a single character 770 [seq] matches any character in seq 771 [!seq] matches any character not in seq 773 A backslash followed by a character matches the following character. 774 In particular: 776 \* matches * 777 \? matches ? 778 \\ matches \ 780 A sequence seq may be a sequence of characters (e.g., [abc] or a 781 range of characters (e.g., [a-c]). 783 3.4. Logging Information 785 The MA may report on the success or failure of Configuration or 786 Instruction communications from the Controller. In addition further 787 operational logs may be produced during the operation of the MA and 788 updates to capabilities may also be reported. Reporting this 789 information is achieved in exactly the same manner as scheduling any 790 other Task. We make no distinction between a Measurement Task 791 conducting an active or passive network measurement and one which 792 solely retrieves static or dynamic information from the MA such as 793 capabilities or logging information. One or more logging tasks can 794 be programmed or configured to capture subsets of the Logging 795 Information. These logging tasks are then executed by Schedules 796 which also specify that the resultant data is to be transferred over 797 the Controller Channels. 799 The type of Logging Information will fall into three different 800 categories: 802 1. Success/failure/warning messages in response to information 803 updates from the Controller. Failure messages could be produced 804 due to some inability to receive or parse the Controller 805 communication, or if the MA is not able to act as instructed. 806 For example: 808 * "Measurement Schedules updated OK" 810 * "Unable to parse JSON" 812 * "Missing mandatory element: Measurement Timing" 814 * "'Start' does not conform to schema - expected datetime" 816 * "Date specified is in the past" 818 * "'Hour' must be in the range 1..24" 820 * "Schedule A refers to non-existent Measurement Task 821 Configuration" 823 * "Measurement Task Configuration X registry entry Y not found" 825 * "Updated Measurement Task Configurations do not include M used 826 by Measurement Schedule N" 828 2. Operational updates from the MA. For example: 830 * "Out of memory: cannot record result" 832 * "Collector 'collector.example.com' not responding" 834 * "Unexpected restart" 836 * "Suppression timeout" 838 * "Failed to execute Measurement Task Configuration H" 840 3. Status updates from the MA. For example: 842 * "Device interface added: eth3" 844 * "Supported measurements updated" 846 * "New IP address on eth0: xxx.xxx.xxx.xxx" 848 This Information Model document does not detail the precise format of 849 logging information since it is to a large extent protocol and MA 850 specific. However, some common information can be identified. 852 3.4.1. Definition of ma-log-obj 854 object { 855 uuid ma-log-agent-id; 856 datetime ma-log-event-time; 857 code ma-log-code; 858 string ma-log-description; 859 } ma-log-obj; 861 The ma-log-obj models the generic aspects of a logging object and 862 consists of the following elements: 864 ma-log-agent-id: A uuid uniquely identifying the measurement 865 agent. 867 ma-log-event-time: The date and time of the event reported in 868 the logging object. 870 ma-log-code: A machine readable code describing the 871 event. 873 ma-log-description: A human readable description of the event. 875 3.5. Capability and Status Information 877 The MA will hold Capability Information that can be retrieved by a 878 Controller. Capabilities include the device interface details 879 available to Measurement Tasks as well as the set of Measurement 880 Tasks/Roles (specified by registry entries) that are actually 881 installed or available on the MA. Status information includes the 882 times that operations were last performed such as contacting the 883 Controller or producing Reports. 885 3.5.1. Definition of ma-capability-obj 887 object { 888 string ma-capability-hardware; 889 string ma-capability-firmware; 890 string ma-capability-version; 891 [string ma-capability-tags<0..*>;] 892 [ma-capability-task-obj ma-capability-tasks<0..*>;] 893 } ma-capability-obj; 895 The ma-capability-obj provides information about the capabilities of 896 the measurement agent and consists of the following elements: 898 ma-capability-hardware: A description of the hardware of the device 899 the measurement agent is running on. 901 ma-capability-firmware: A description of the firmware of the device 902 the measurement agent is running on. 904 ma-capability-version: The version of the measurement agent. 906 ma-capability-tags: An optional unordered set of tags that 907 provide additional information about the 908 capabilities of the measurement agent. 910 ma-capability-tasks: An optional unordered set of capability 911 objects for each supported task. 913 3.5.2. Definition of ma-capability-task-obj 915 object { 916 string ma-capability-task-name; 917 ma-registry-obj ma-capability-task-functions<0..*>; 918 string ma-capability-task-version; 919 } ma-capability-task-obj; 921 The ma-capability-task-obj provides information about the capability 922 of a task and consists of the following elements: 924 ma-capability-task-name: A name uniquely identifying a task. 926 ma-capability-task-functions: A possibly empty unordered set of 927 registry entries identifying 928 functions this task implements. 930 ma-capability-task-version: The version of the measurement task. 932 3.5.3. Definition of ma-status-obj 934 object { 935 uuid ma-status-agent-id; 936 uri ma-status-device-id; 937 datetime ma-status-last-started; 938 ma-status-interface-obj ma-status-interfaces<0..*>; 939 [ma-status-schedule-obj ma-status-schedules<0..*>;] 940 [ma-status-suppression-obj ma-status-suppressions<0..*>;] 941 } ma-status-obj; 943 The ma-status-obj provides status information about the measurement 944 agent and consists of the following elements: 946 ma-status-agent-id: A uuid uniquely identifying the measurement 947 agent. 949 ma-status-device-id: A URI identifying the device. 951 ma-status-last-started: The date and time the measurement agent 952 last started. 954 ma-status-interfaces: An unordered set of network interfaces 955 available on the device. 957 ma-status-schedules: An optional unordered set of status objects 958 for each schedule. 960 ma-status-suppressions: An optional unordered set of status objects 961 for each suppression. 963 3.5.4. Definition of ma-status-schedule-obj 965 object { 966 string ma-status-schedule-name; 967 string ma-status-schedule-state; 968 int ma-status-schedule-storage; 969 counter ma-status-schedule-invocations; 970 counter ma-status-schedule-suppressions; 971 counter ma-status-schedule-overlaps; 972 counter ma-status-schedule-failures; 973 datetime ma-status-schedule-last-invocation; 974 [ma-status-action-obj ma-status-schedule-actions<0..*>;] 975 } ma-status-schedule-obj; 977 The ma-status-schedule-obj provides status information about the 978 status of a schedule and consists of the following elements: 980 ma-status-schedule-name: The name of the schedule this 981 status object refers to. 983 ma-status-schedule-state: The state of the schedule. The 984 value 'enabled' indicates that 985 the schedule is currently 986 enabled. The value 'suppressed' 987 indicates that the schedule is 988 currently suppressed. The value 989 'disabled' indicates that the 990 schedule is currently disabled. 991 The value 'running' indicates 992 that the schedule is currently 993 running. 995 ma-status-schedule-storage: The amount of secondary storage 996 (e.g., allocated in a file 997 system) holding temporary data 998 allocated to the schedule in 999 bytes. This object reports the 1000 amount of allocated physical 1001 storage and not the storage used 1002 by logical data records. Data 1003 models should use a 64-bit 1004 integer type. 1006 ma-status-schedule-invocations Number of invocations of this 1007 schedule. This counter does not 1008 include suppressed invocations or 1009 invocations that were prevented 1010 due to an overlap with a previous 1011 invocation of this schedule. 1013 ma-status-schedule-suppressions Number of suppressed executions 1014 of this schedule. 1016 ma-status-schedule-overlaps Number of executions prevented 1017 due to overlaps with a previous 1018 invocation of this schedule. 1020 ma-status-schedule-failures Number of failed executions of 1021 this schedule. A failed 1022 execution is an execution where 1023 at least one action failed. 1025 ma-status-schedule-last-invocation: The date and time of the last 1026 invocation of this schedule. 1028 ma-status-schedule-actions: An optional ordered list of 1029 status objects for each action of 1030 the schedule. 1032 3.5.5. Definition of ma-status-action-obj 1033 object { 1034 string ma-status-action-name; 1035 string ma-status-action-state; 1036 int ma-status-action-storage; 1037 counter ma-status-action-invocations; 1038 counter ma-status-action-suppressions; 1039 counter ma-status-action-overlaps; 1040 counter ma-status-action-failures; 1041 datetime ma-status-action-last-invocation; 1042 datetime ma-status-action-last-completion; 1043 int ma-status-action-last-status; 1044 string ma-status-action-last-message; 1045 datetime ma-status-action-last-failed-completion; 1046 int ma-status-action-last-failed-status; 1047 string ma-status-action-last-failed-message; 1048 } ma-status-action-obj; 1050 The ma-status-action-obj provides status information about an action 1051 of a schedule and consists of the following elements: 1053 ma-status-action-name: The name of the action of a 1054 schedule this status object 1055 refers to. 1057 ma-status-action-state: The state of the action. 1058 The value 'enabled' 1059 indicates that the action is 1060 currently enabled. The 1061 value 'suppressed' indicates 1062 that the action is currently 1063 suppressed. The value 1064 'disabled' indicates that 1065 the action is currently 1066 disabled. The value 1067 'running' indicates that the 1068 action is currently running. 1070 ma-status-action-storage: The amount of secondary 1071 storage (e.g., allocated in 1072 a file system) holding 1073 temporary data allocated to 1074 the action in bytes. This 1075 object reports the amount of 1076 allocated physical storage 1077 and not the storage used by 1078 logical data records. Data 1079 models should use a 64-bit 1080 integer type. 1082 ma-status-action-invocations Number of invocations of 1083 this action. This counter 1084 does not include suppressed 1085 invocations or invocations 1086 that were prevented due to 1087 an overlap with a previous 1088 invocation of this action. 1090 ma-status-action-suppressions Number of suppressed 1091 executions of this action. 1093 ma-status-action-overlaps Number of executions 1094 prevented due to overlaps 1095 with a previous invocation 1096 of this action. 1098 ma-status-action-failures Number of failed executions 1099 of this action. 1101 ma-status-action-last-invocation: The date and time of the 1102 last invocation of this 1103 action. 1105 ma-status-action-last-completion: The date and time of the 1106 last completion of this 1107 action. 1109 ma-status-action-last-status: The status code returned by 1110 the last execution of this 1111 action. 1113 ma-status-action-last-message: The status message produced 1114 by the last execution of 1115 this action. 1117 ma-status-action-last-failed-completion: The date and time of the 1118 last failed completion of 1119 this action. 1121 ma-status-action-last-failed-status: The status code returned by 1122 the last failed execution of 1123 this action. 1125 ma-status-action-last-failed-message: The status message produced 1126 by the last failed execution 1127 of this action. 1129 3.5.6. Definition of ma-status-suppression-obj 1131 object { 1132 string ma-status-suppression-name; 1133 string ma-status-suppression-state; 1134 } ma-status-suppression-obj; 1136 The ma-status-suppression-obj provides status information about that 1137 status of a suppression and consists of the following elements: 1139 ma-status-suppression-name: The name of the suppression this status 1140 object refers to. 1142 ma-status-suppression-state: The state of the suppression. The 1143 value 'enabled' indicates that the 1144 suppression is currently enabled. The 1145 value 'active indicates that the 1146 suppression is currently active. The 1147 value 'disabled' indicates that the 1148 suppression is currently disabled. 1150 3.5.7. Definition of ma-status-interface-obj 1152 object { 1153 string ma-status-interface-name; 1154 string ma-status-interface-type; 1155 [int ma-status-interface-speed;] 1156 [string ma-status-interface-link-layer-address;] 1157 [ip-address ma-status-interface-ip-addresses<0..*>;] 1158 [ip-address ma-status-interface-gateways<0..*>;] 1159 [ip-address ma-status-interface-dns-servers<0..*>;] 1160 } ma-status-interface-obj; 1162 The ma-status-interface-obj provides status information about network 1163 interfaces and consists of the following elements: 1165 ma-status-interface-name: A name uniquely identifying a 1166 network interface. 1168 ma-status-interface-type: The type of the network 1169 interface. 1171 ma-status-interface-speed: An optional indication of the 1172 speed of the interface 1173 (measured in bits-per- 1174 second). 1176 ma-status-interface-link-layer-address: An optional link-layer 1177 address of the interface. 1179 ma-status-interface-ip-addresses: An optional ordered list of 1180 IP addresses assigned to the 1181 interface. 1183 ma-status-interface-gateways: An optional ordered list of 1184 gateways assigned to the 1185 interface. 1187 ma-status-interface-dns-servers: An optional ordered list of 1188 DNS servers assigned to the 1189 interface. 1191 3.6. Reporting Information 1193 At a point in time specified by a Schedule, the MA will execute tasks 1194 that communicate a set of measurement results to the Collector. 1195 These Reporting Tasks will be configured to transmit task results 1196 over a specified Report Channel to a Collector. 1198 It should be noted that the output from Tasks does not need to be 1199 sent to communication Channels. It can alternatively, or 1200 additionally, be sent to other Tasks on the MA. This facilitates 1201 using a first Measurement Task to control the operation of a later 1202 Measurement Task (such as first probing available line speed and then 1203 adjusting the operation of a video testing measurement) and also to 1204 allow local processing of data to output alarms (e.g., when 1205 performance drops from earlier levels). Of course, subsequent Tasks 1206 also include Tasks that implement the reporting protocol(s) and 1207 transfer data to one or more Collector(s). 1209 The Report generated by a Reporting Task is structured hierarchically 1210 to avoid repetition of report header and Measurement Task 1211 Configuration information. The report starts with the timestamp of 1212 the report generation on the MA and details about the MA including 1213 the optional Measurement Agent ID and Group ID (controlled by the 1214 Configuration Information). 1216 Much of the report Information is optional and will depend on the 1217 implementation of the Reporting Task and any parameters defined in 1218 the Task Configuration for the Reporting Task. For example some 1219 Reporting Tasks may choose not to include the Measurement Task 1220 Configuration or Action parameters, while others may do so dependent 1221 on the Controller setting a configurable parameter in the Task 1222 Configuration. 1224 It is possible for a Reporting Task to send just the Report header 1225 (datetime and optional agent ID and/or Group ID) if no measurement 1226 data is available. Whether to send such empty reports again is 1227 dependent on the implementation of the Reporting Task and potential 1228 Task Configuration parameter. 1230 The handling of measurement data on the MA before generating a Report 1231 and transfer from the MA to the Collector is dependent on the 1232 implementation of the device, MA and/or scheduled Tasks and not 1233 defined by the LMAP standards. Such decisions may include limits to 1234 the measurement data storage and what to do when such available 1235 storage becomes depleted. It is generally suggested that 1236 implementations running out of storage stop executing new measurement 1237 tasks and retain old measurement data. 1239 No context information, such as line speed or broadband product are 1240 included within the report header information as this data is 1241 reported by individual tasks at the time they execute. Either a 1242 Measurement Task can report contextual parameters that are relevant 1243 to that particular measurement, or specific tasks can be used to 1244 gather a set of contextual and environmental data at certain times 1245 independent of the reporting schedule. 1247 After the report header information the results are reported grouped 1248 according to different Measurement Task Configurations. Each Task 1249 section optionally starts with replicating the Measurement Task 1250 Configuration information before the result headers (titles for data 1251 columns) and the result data rows. The Options reported are those 1252 used for the scheduled execution of the Measurement Task and 1253 therefore include the Options specified in the Task Configuration as 1254 well as additional Options specified in the Action. The Action 1255 Options are appended to the Task Configuration Options in exactly the 1256 same order as they were provided to the Task during execution. 1258 The result row data includes a time for the start of the measurement 1259 and optionally an end time where the duration also needs to be 1260 considered in the data analysis. 1262 Some Measurement Tasks may optionally include an indication of the 1263 cross-traffic although the definition of cross-traffic is left up to 1264 each individual Measurement Task. Some Measurement Tasks may also 1265 output other environmental measures in addition to cross-traffic such 1266 as CPU utlilisation or interface speed. 1268 Where the Configuration and Instruction information represent 1269 information transmitted via the Control Protocol, the Report 1270 represents the information that is transmitted via the Report 1271 Protocol. It is constructed at the time of sending a report and 1272 represents the inherent structure of the information that is sent to 1273 the Collector. 1275 3.6.1. Definition of ma-report-obj 1277 object { 1278 datetime ma-report-date; 1279 [uuid ma-report-agent-id;] 1280 [string ma-report-group-id;] 1281 [string ma-report-measurement-point;] 1282 [ma-report-result-obj ma-report-results<0..*>;] 1283 } ma-report-obj; 1285 The ma-report-obj provides the meta-data of a single report and 1286 consists of the following elements: 1288 ma-report-date: The date and time when the report was 1289 sent to a collector. 1291 ma-report-agent-id: An optional uuid uniquely identifying 1292 the measurement agent. 1294 ma-report-group-id: An optional identifier of the group of 1295 measurement agents this measurement 1296 agent belongs to. 1298 ma-report-measurement-point: An optional identifier for the 1299 measurement point indicating where the 1300 measurement agent is located on a path 1301 (see [RFC7398] for further details). 1303 ma-report-results: An optional and possibly empty 1304 unordered set of result objects. 1306 3.6.2. Definition of ma-report-result-obj 1307 object { 1308 string ma-report-result-schedule-name; 1309 string ma-report-result-action-name; 1310 string ma-report-result-task-name; 1311 [ma-option-obj ma-report-result-options<0..*>;] 1312 [string ma-report-result-tags<0..*>;] 1313 datetime ma-report-result-event-time; 1314 datetime ma-report-result-start-time; 1315 [datetime ma-report-result-end-time;] 1316 [string ma-report-result-cycle-number;] 1317 int ma-report-result-status; 1318 [ma-report-conflict-obj ma-report-result-conflicts<0..*>;] 1319 [ma-report-table-obj ma-report-result-tables<0..*>;] 1320 } ma-report-result-obj; 1322 The ma-report-result-obj provides the meta-data of a result report of 1323 a single executed action. It consists of the following elements: 1325 ma-report-result-schedule-name: The name of the schedule that 1326 produced the result. 1328 ma-report-result-action-name: The name of the action in the 1329 schedule that produced the result. 1331 ma-report-result-task-name: The name of the task that produced 1332 the result. 1334 ma-report-result-options: An optional ordered joined list of 1335 options provided by the task object 1336 and the action object when the action 1337 was started. 1339 ma-report-result-tags: An optional unordered set of tags. 1340 This is the joined set of tags 1341 provided by the task object and the 1342 action object and schedule object 1343 when the action was started. 1345 ma-report-result-event-time: The date and time of the event that 1346 triggered the schedule of the action 1347 that produced the reported result 1348 values. The date and time does not 1349 include any added randomization. 1351 ma-report-result-start-time: The date and time of the start of the 1352 action that produced the reported 1353 result values. 1355 ma-report-result-end-time: An optional date and time indicating 1356 when the action finished. 1358 ma-report-result-cycle-number: An optional cycle number derived from 1359 ma-report-result-event-time. It is 1360 the time closest to ma-report-result- 1361 event-time that is a multiple of the 1362 ma-event-cycle-interval of the event 1363 that triggered the execution of the 1364 schedule. The value is only present 1365 in an ma-report-result-obj if the 1366 event that triggered the execution of 1367 the schedule has a defined ma-event- 1368 cycle-interval. The cycle number is 1369 represented in the format 1370 YYYYMMDD.HHMMSS where YYYY represents 1371 the year, MM the month (1..12), DD 1372 the day of the months (01..31), HH 1373 the hour (00..23), MM the minute 1374 (00..59), and SS the second (00..59). 1375 The cycle number is using Coordinated 1376 Universal Time (UTC). 1378 ma-report-result-status: The status code returned by the 1379 execution of the action. 1381 ma-report-result-conflicts: A possibly empty set of conflict 1382 actions that might have impacted the 1383 measurement results being reported. 1385 ma-report-result-tables: An optional and possibly empty 1386 unordered set of result tables. 1388 3.6.3. Definition of ma-report-conflict-obj 1390 object { 1391 string ma-report-conflict-schedule-name; 1392 string ma-report-conflict-action-name; 1393 string ma-report-conflict-task-name; 1394 } ma-report-conflict-obj; 1396 The ma-report-conflict-obj provides the information about conflicting 1397 action that might have impacted the measurement results. It consists 1398 of the following elements: 1400 ma-report-result-schedule-name: The name of the schedule that may 1401 have impacted the result. 1403 ma-report-result-action-name: The name of the action in the 1404 schedule that may have impacted the 1405 result. 1407 ma-report-result-task-name: The name of the task that may have 1408 impacted the result. 1410 3.6.4. Definition of ma-report-table-obj 1412 object { 1413 [ma-registry-obj ma-report-table-functions<0..*>;] 1414 [string] ma-report-table-column-labels<0..*>;] 1415 [ma-report-row-obj ma-report-table-rows<0..*>;] 1416 } ma-report-table-obj; 1418 The ma-report-table-obj represents a result table and consists of the 1419 following elements: 1421 ma-report-table-functions: An optional and possibly empty 1422 unordered set of registry entries 1423 identifying the functions for which 1424 results that are reported. 1426 ma-report-table-column-labels: An optional and possibly empty 1427 ordered list of column labels. 1429 ma-report-table-rows: A possibly empty ordered list of 1430 result rows. 1432 3.6.5. Definition of ma-report-row-obj 1434 object { 1435 data ma-report-row-values<0..*>; 1436 } ma-report-row-obj; 1438 The ma-report-row-obj represents a result row and consists of the 1439 following elements: 1441 ma-report-row-values: A possibly empty ordered list of result 1442 values. When present, it contains an 1443 ordered list of values that align to the 1444 set of column labels for the report. 1446 3.7. Common Objects: Schedules 1448 A Schedule specifies the execution of a single or repeated series of 1449 Actions. An Action is a Task with additional specific parameters. 1450 Each Schedule contains basically two elements: an ordered list of 1451 Actions to be executed and an Event object triggering the execution 1452 of the Schedule. The Schedule states what Actions to run (with what 1453 configuration) and when to run the Actions. A Schedule may 1454 optionally have an Event that stops the execution of the Schedule or 1455 a maximum duration after which a schedule is stopped. 1457 Multiple Actions contained as an ordered list of a single Measurement 1458 Schedule will be executed according to the execution mode of the 1459 Schedule. In sequential mode, Actions will be executed sequentially 1460 and in parallel mode, all Actions will be executed concurrently. In 1461 pipelined mode, data produced by one Action is passed to the 1462 subsequent Action. Actions contained in different Schedules execute 1463 in parallel with such conflicts being reported in the Reporting 1464 Information where necessary. If two or more Schedules have the same 1465 start time, then the two will execute in parallel. There is no 1466 mechanism to prioritise one schedule over another or to mutex 1467 scheduled tasks. 1469 As well as specifying which Actions to execute, the Schedule also 1470 specifies how to link the data outputs from each Action to other 1471 Schedules. Specifying this within the Schedule allows the highest 1472 level of flexibility since it is even possible to send the output 1473 from different executions of the same Task Configuration to different 1474 destinations. A single Task producing multiple different outputs is 1475 expected to properly tag the different result. An Action receiving 1476 the output can then filter the results based on the tag if necessary. 1477 For example, a Measurement Task might report routine results to a 1478 data Reporting Task in a Schedule that communicates hourly via the 1479 Broadband PPP interface, but also outputs emergency conditions via an 1480 alarm Reporting Task in a different Schedule communicating 1481 immediately over a GPRS channel. Note that task-to-task data 1482 transfer is always specified in association with the scheduled 1483 execution of the sending task - there is no need for a corresponding 1484 input specification for the receiving task. While it is likely that 1485 an MA implementation will use a queue mechanism between the Schedules 1486 or Actions, this Information Model does not mandate or define a 1487 queue. The Information Model, however, reports the storage allocated 1488 to Schedules and Actions so that storage usage can be monitored. 1489 Furthermore, it is recommended that MA implementations by default 1490 retain old data and stop the execution of new measurement tasks if 1491 the MA runs out of storage capacity. 1493 When specifying the task to execute within the Schedule, i.e., 1494 creating an Action, it is possible to add to the Action option 1495 parameters. This allows the Task Configuration to determine the 1496 common characteristics of a Task, while selected parameters (e.g., 1497 the test target URL) are defined within as option parameters of the 1498 Action in the schedule. A single Tasks Configuration can even be 1499 used multiple times in the same schedule with different additional 1500 parameters. This allows for efficiency in creating and transferring 1501 the Instruction. Note that the semantics of what happens if an 1502 option is defined multiple times (either in the Task Configuration, 1503 Action or in both) is not standardised and will depend upon the Task. 1504 For example, some tasks may legitimately take multiple values for a 1505 single parameter. 1507 Where Options are specified in both the Action and the Task 1508 Configuration, the Action Options are appended to those specified in 1509 the Task Configuration. 1511 Example: An Action of a Schedule references a single Measurement 1512 Task Configuration for measuring UDP latency. It specifies that 1513 results are to be sent to a Schedule with a Reporting Action. 1514 This Reporting Task of the Reporting Action is executed by a 1515 separate Schedule that specifies that it should run hourly at 5 1516 minutes past the hour. When run this Reporting Action takes the 1517 data generated by the UDP latency Measurement Task as well as any 1518 other data to be included in the hourly report and transfers it to 1519 the Collector over the Report Channel specified within its own 1520 Schedule. 1522 Schedules and Actions may optionally also be given tags that are 1523 included in result reports sent to a Collector. In addition, 1524 schedules can be given suppression tags that may be used to select 1525 Schedules and Actions for suppression. 1527 3.7.1. Definition of ma-schedule-obj 1529 object { 1530 string ma-schedule-name; 1531 ma-event-obj ma-schedule-start; 1532 [ma-event-obj ma-schedule-end;] 1533 [int ma-schedule-duration;] 1534 ma-action-obj ma-schedule-actions<0..*>; 1535 string ma-schedule-execution-mode; 1536 [string ma-schedule-tags<0..*>;] 1537 [string ma-schedule-suppression-tags<0..*>;] 1538 } ma-schedule-obj; 1540 The ma-schedule-obj is the main scheduling object. It consists of 1541 the following elements: 1543 ma-schedule-name: A name uniquely identifying a 1544 scheduling object. 1546 ma-schedule-start: An event object indicating when the 1547 schedule starts. 1549 ma-schedule-end: An optional event object controlling 1550 the forceful termination of scheduled 1551 actions. When the event occurs, all 1552 actions of the schedule will be forced 1553 to terminate gracefully. 1555 ma-schedule-duration: An optional duration in seconds for the 1556 schedule. All actions of the schedule 1557 will be forced to terminate gracefully 1558 after the duration number of seconds 1559 past the start of the schedule. 1561 ma-schedule-actions: A possibly empty ordered list of 1562 actions to invoke when the schedule 1563 starts. 1565 ma-schedule-execution-mode: Indicates whether the actions should be 1566 executed sequentially, in parallel, or 1567 in a pipelined mode (where data 1568 produced by one action is passed to the 1569 subsequent action). The default 1570 execution mode is pipelined. 1572 ma-schedule-tags: An optional unordered set of tags that 1573 are reported together with the 1574 measurement results to a collector. 1576 ma-schedule-suppression-tags: An optional unordered set of 1577 suppression tags that are used to 1578 select schedules to be suppressed. 1580 3.7.2. Definition of ma-action-obj 1582 object { 1583 string ma-action-name; 1584 string ma-action-config-task-name; 1585 [ma-option-obj ma-action-task-options<0..*>;] 1586 [string ma-action-destinations<0..*>;] 1587 [string ma-action-tags<0..*>;] 1588 [string ma-action-suppression-tags<0..*>;] 1589 } ma-action-obj; 1591 The ma-action-obj models a task together with its schedule specific 1592 task options and destination schedules. It consists of the following 1593 elements: 1595 ma-action-name: A name uniquely identifying an action 1596 of a scheduling object. 1598 ma-action-config-task-name: A name identifying the configured task 1599 to be invoked by the action. 1601 ma-action-task-options: An optional and possibly empty ordered 1602 list of options (name-value pairs) that 1603 are passed to the task by appending 1604 them to the options configured for the 1605 task object. 1607 ma-action-destinations: An optional and possibly empty 1608 unordered set of names of destination 1609 schedules that consume output produced 1610 by this action. 1612 ma-action-tags: An optional unordered set of tags that 1613 are reported together with the 1614 measurement results to a collector. 1616 ma-action-suppression-tags: An optional unordered set of 1617 suppression tags that are used to 1618 select actions to be suppressed. 1620 3.8. Common Objects: Channels 1622 A Channel defines a bi-directional communication channel between the 1623 MA and a Controller or Collector. Multiple Channels can be defined 1624 to enable results to be split or duplicated across different 1625 Collectors. 1627 Each Channel contains the details of the remote endpoint (including 1628 location and security credential information such as the 1629 certificate). The timing of when to communicate over a Channel is 1630 specified by the Schedule which executes the corresponding Control or 1631 Reporting Task. The certificate can be the digital certificate 1632 associated to the FQDN in the URL or it can be the certificate of the 1633 Certification Authority that was used to issue the certificate for 1634 the FQDN (Fully Qualified Domain Name) of the target URL (which will 1635 be retrieved later on using a communication protocol such as TLS). 1636 In order to establish a secure channel, the MA will use it's own 1637 security credentials (in the Configuration Information) and the given 1638 credentials for the individual Channel end-point. 1640 As with the Task Configurations, each Channel is also given a text 1641 name by which it can be referenced as a Task Option. 1643 Although the same in terms of information, Channels used for 1644 communication with the Controller are referred to as Control Channels 1645 whereas Channels to Collectors are referred to as Report Channels. 1646 Hence Control Channels will be referenced from Control Tasks executed 1647 by a Control Schedule, whereas Report Channels will be referenced 1648 from within Reporting Tasks executed by an Instruction Schedule. 1650 Multiple interfaces are also supported. For example the Reporting 1651 Task could be configured to send some results over GPRS. This is 1652 especially useful when such results indicate the loss of connectivity 1653 on a different network interface. 1655 Example: A Channel used for reporting results may specify that 1656 results are to be sent to the URL (https://collector.example.org/ 1657 report/), using the appropriate digital certificate to establish a 1658 secure channel. 1660 3.8.1. Definition of ma-channel-obj 1662 object { 1663 string ma-channel-name; 1664 url ma-channel-target; 1665 credentials ma-channel-credentials; 1666 [string ma-channel-interface-name;] 1667 } ma-channel-obj; 1669 The ma-channel-obj consists of the following elements: 1671 ma-channel-name: A unique name identifying the channel 1672 object. 1674 ma-channel-target: A URL identifying the target channel 1675 endpoint. 1677 ma-channel-credentials: The security credentials needed to 1678 establish a secure channel. 1680 ma-channel-interface-name: An optional name of the network interface 1681 to be used. If not present, the IP 1682 protocol stack will select a suitable 1683 interface. 1685 3.9. Common Objects: Task Configurations 1687 Conceptually each Task Configuration defines the parameters of a Task 1688 that the Measurement Agent (MA) may perform at some point in time. 1689 It does not by itself actually instruct the MA to perform them at any 1690 particular time (this is done by a Schedule). Tasks can be 1691 Measurement Tasks (i.e., those Tasks actually performing some type of 1692 passive or active measurement) or any other scheduled activity 1693 performed by the MA such as transferring information to or from the 1694 Controller and Collectors. Other examples of Tasks may include data 1695 manipulation or processing Tasks conducted on the MA. 1697 A Measurement Task Configuration is the same in information terms to 1698 any other Task Configuration. Both measurement and non-measurement 1699 Tasks have registry entries to enable the MA to uniquely identify the 1700 Task it should execute and retrieve the schema for any parameters 1701 that may be passed to the Task. Registry entries are specified as a 1702 URI and can therefore be used to identify the Task within a namespace 1703 or point to a web or local file location for the Task information. 1704 As mentioned previously, these URIs may be used to identify the 1705 Measurement Task in a public namespace 1706 [I-D.ietf-ippm-metric-registry]. 1708 Example: A Measurement Task Configuration may configure a single 1709 Measurement Task for measuring UDP latency. The Measurement Task 1710 Configuration could define the destination port and address for 1711 the measurement as well as the duration, internal packet timing 1712 strategy and other parameters (for example a stream for one hour 1713 and sending one packet every 500 ms). It may also define the 1714 output type and possible parameters (for example the output type 1715 can be the 95th percentile mean) where the measurement task 1716 accepts such parameters. It does not define when the task starts 1717 (this is defined by the Schedule element), so it does not by 1718 itself instruct the MA to actually perform this Measurement Task. 1720 The Task Configuration will include a local short name for reference 1721 by a Schedule. Task Configurations may also refer to registry 1722 entries as described above. In addition the Task can be configured 1723 through a set of configuration Options. The nature and number of 1724 these Options will depend upon the Task. These options are expressed 1725 as name-value pairs although the 'value' may be a structured object 1726 instead of a simple string or numeric value. The implementation of 1727 these name-value pairs will vary between data models. 1729 An Option that must be present for Reporting Tasks is the Channel 1730 reference specifying how to communicate with a Collector. This is 1731 included in the task options and will have a value that matches a 1732 channel name that has been defined in the Instruction. Similarly 1733 Control Tasks will have a similar option with the value set to a 1734 specified Control Channel. 1736 A Reporting Task might also have a flag parameter, defined as an 1737 Option, to indicate whether to send a report without measurement 1738 results if there is no measurement result data pending to be 1739 transferred to the Collector. In addition many tasks will also take 1740 as a parameter which interface to operate over. 1742 In addition the Task Configuration may optionally also be given tags 1743 that can carry a Measurement Cycle ID. The purpose of this ID is to 1744 easily identify a set of measurement results that have been produced 1745 by Measurement Tasks with comparable Options. This ID could be 1746 manually incremented or otherwise changed when an Option change is 1747 implemented which could mean that two sets of results should not be 1748 directly compared. 1750 3.9.1. Definition of ma-task-obj 1752 object { 1753 string ma-task-name; 1754 ma-registry-obj ma-task-functions<0..*>; 1755 [ma-option-obj ma-task-options<0..*>;] 1756 [string ma-task-tags<0..*>;] 1757 } ma-task-obj; 1759 The ma-task-obj defines a configured task that can be invoked as part 1760 of an action. A configured task can be referenced by its name and it 1761 contains a set of URIs to link to registry entries or a local 1762 specification of the task. Options allow the configuration of task 1763 parameters (in the form of name-value pairs). The ma-task-obj 1764 consists of the following elements: 1766 ma-task-name: A name uniquely identifying a configured 1767 task object. 1769 ma-task-functions: A possibly empty unordered set of registry 1770 entries identifying the functions of the 1771 configured task. 1773 ma-task-options: An optional and possibly empty ordered list 1774 of options (name-value pairs) that are 1775 passed to the configured task. 1777 ma-task-tags: An optional unordered set of tags that are 1778 reported together with the measurement 1779 results to a collector. 1781 3.9.2. Definition of ma-option-obj 1783 object { 1784 string ma-option-name; 1785 [object ma-option-value;] 1786 } ma-option-obj; 1788 The ma-option-obj models a name-value pair and consists of the 1789 following elements: 1791 ma-option-name: The name of the option. 1793 ma-option-value: The optional value of the option. 1795 The ma-option-obj is used to define Task Configuration Options. Task 1796 Configuration Options are generally task specific. For tasks 1797 associated with an entry in a registry, the registry may define well- 1798 known option names (e.g., the so-called parameters in the IPPM metric 1799 registry [I-D.ietf-ippm-metric-registry]). Control and Reporting 1800 Tasks need to know the Channel they are going to use. The common 1801 option name for specifying the channel is "channel" where the 1802 option's value refers to the name of an ma-channel-obj. 1804 3.10. Common Objects: Registry Information 1806 Tasks and actions can be associated with entries in a registry. A 1807 registry object refers to an entry in a registry (identified by a 1808 URI) and it may define a set of roles. 1810 3.10.1. Definition of ma-registry-obj 1812 object { 1813 uri ma-registry-uri; 1814 [string ma-registry-role<0..*>;] 1815 } ma-registry-obj; 1817 The ma-registry-obj refers to an entry of a registry and it defines 1818 the associated role(s). The ma-registry-obj consists of the 1819 following elements: 1821 ma-registry-uri: A URI identifying an entry in a registry. 1823 ma-registry-role: An optional and possibly empty unordered 1824 set of roles for the identified registry 1825 entry. 1827 3.11. Common Objects: Event Information 1829 The Event information object used throughout the information models 1830 can initially take one of several different forms. Additional forms 1831 may be defined later in order to bind the execution of schedules to 1832 additional events. The initially defined Event forms are: 1834 1. Periodic Timing: Emits multiple events periodically according to 1835 an interval time defined in seconds 1837 2. Calendar Timing: Emits multiple events according to a calendar 1838 based pattern, e.g., 22 minutes past each hour of the day on 1839 weekdays 1841 3. One Off Timing: Emits one event at a specific date and time 1843 4. Immediate: Emits one event as soon as possible 1845 5. Startup: Emits an event whenever the MA is started (e.g., at 1846 device startup) 1848 6. Controller Lost: Emits an event when connectivity to the 1849 controller has been lost 1851 7. Controller Connected: Emits an event when connectivity to the 1852 controller has been (re-)established 1854 Optionally each of the Event options may also specify a randomness 1855 that should be evaluated and applied separately to each indicated 1856 event. This randomness parameter defines a uniform interval in 1857 seconds over which the start of the task is delayed from the starting 1858 times specified by the event object. 1860 Both the Periodic and Calendar timing objects allow for a series of 1861 Actions to be executed. While both have an optional end time, it is 1862 best practice to always configure an end time and refresh the 1863 information periodically to ensure that lost MAs do not continue 1864 their tasks forever. 1866 Startup events are only created on device startup, not when a new 1867 Instruction is transferred to the MA. If scheduled task execution is 1868 desired both on the transfer of the Instruction and on device restart 1869 then both the Immediate and Startup timing needs to be used in 1870 conjunction. 1872 The datetime format used for all elements in the information model 1873 MUST conform to RFC 3339 [RFC3339]. 1875 3.11.1. Definition of ma-event-obj 1876 object { 1877 string ma-event-name; 1878 union { 1879 ma-periodic-obj ma-event-periodic; 1880 ma-calendar-obj ma-event-calendar; 1881 ma-one-off-obj ma-event-one-off; 1882 ma-immediate-obj ma-event-immediate; 1883 ma-startup-obj ma-event-startup; 1884 ma-controller-lost-obj ma-event-controller-lost; 1885 ma-controller-connected-obj ma-event-controller-connected; 1886 } 1887 [int ma-event-random-spread;] 1888 [int ma-event-cycle-interval;] 1889 } ma-event-obj; 1891 The ma-event-obj is the main event object. Event objects are 1892 identified by a name. A generic event object itself contains a more 1893 specific event object. The set of specific event objects should be 1894 extensible. The initial set of specific event objects is further 1895 described below. The ma-event-obj also includes an optional uniform 1896 random spread that can be used to randomize the start times of 1897 schedules triggered by an event. The ma-event-obj consists of the 1898 following elements: 1900 ma-event-name: The name uniquely identifies an event 1901 object. Schedules refer to event 1902 objects by this name. 1904 ma-event-periodic: The ma-event-periodic is present for 1905 periodic timing objects. 1907 ma-event-calendar: The ma-event-calendar is present for 1908 calendar timing objects. 1910 ma-event-one-off: The ma-event-one-off is present for 1911 one-off timing objects. 1913 ma-event-immediate: The ma-event-immediate is present for 1914 immediate event objects. 1916 ma-event-startup: The ma-event-startup is present for 1917 startup event objects. 1919 ma-event-controller-lost: The ma-event-controller-lost is 1920 present for connectivity to 1921 controller lost event objects. 1923 ma-event-controller-connected: The ma-event-controller-connected is 1924 present for connectivity to a 1925 controller established event objects. 1927 ma-event-random-spread: The optional ma-event-random-spread 1928 adds a random delay defined in 1929 seconds to the event object. No 1930 random delay is added if ma-event- 1931 random-spread does not exist. 1933 ma-event-cycle-interval: The optional ma-event-cycle-interval 1934 defines the duration of the time 1935 interval in seconds that is used to 1936 calculate cycle numbers. No cycle 1937 number is calculated if ma-event- 1938 cycle-interval does not exist. 1940 3.11.2. Definition of ma-periodic-obj 1942 object { 1943 [datetime ma-periodic-start;] 1944 [datetime ma-periodic-end;] 1945 int ma-periodic-interval; 1946 } ma-periodic-obj; 1948 The ma-periodic-obj timing object has an optional start and an 1949 optional end time plus a periodic interval. Schedules using an ma- 1950 periodic-obj are started periodically between the start and end time. 1951 The ma-periodic-obj consists of the following elements: 1953 ma-periodic-start: The optional date and time at which 1954 Schedules using this object are first 1955 started. If not present it defaults to 1956 immediate. 1958 ma-periodic-end: The optional date and time at which 1959 Schedules using this object are last 1960 started. If not present it defaults to 1961 indefinite. 1963 ma-periodic-interval: The interval defines the time in seconds 1964 between two consecutive starts of tasks. 1966 3.11.3. Definition of ma-calendar-obj 1968 Calendar Timing supports the routine execution of Schedules at 1969 specific times and/or on specific dates. It can support more 1970 flexible timing than Periodic Timing since the execution of Schedules 1971 does not have to be uniformly spaced. For example a Calendar Timing 1972 could support the execution of a Measurement Task every hour between 1973 6pm and midnight on weekdays only. 1975 Calendar Timing is also required to perform measurements at 1976 meaningful times in relation to network usage (e.g., at peak times). 1977 If the optional timezone offset is not supplied then local system 1978 time is assumed. This is essential in some use cases to ensure 1979 consistent peak-time measurements as well as supporting MA devices 1980 that may be in an unknown timezone or roam between different 1981 timezones (but know their own timezone information such as through 1982 the mobile network). 1984 The calendar elements within the Calendar Timing do not have defaults 1985 in order to avoid accidental high-frequency execution of Tasks. If 1986 all possible values for an element are desired then the wildcard * is 1987 used. 1989 object { 1990 [datetime ma-calendar-start;] 1991 [datetime ma-calendar-end;] 1992 [string ma-calendar-months<0..*>;] 1993 [string ma-calendar-days-of-week<0..*>;] 1994 [string ma-calendar-days-of-month<0..*>;] 1995 [string ma-calendar-hours<0..*>;] 1996 [string ma-calendar-minutes<0..*>;] 1997 [string ma-calendar-seconds<0..*>;] 1998 [int ma-calendar-timezone-offset;] 1999 } ma-calendar-obj; 2001 ma-calendar-start: The optional date and time at which 2002 Schedules using this object are first 2003 started. If not present it defaults to 2004 immediate. 2006 ma-calendar-end: The optional date and time at which 2007 Schedules using this object are last 2008 started. If not present it defaults to 2009 indefinite. 2011 ma-calendar-months: The optional set of months (1-12) on 2012 which tasks scheduled using this object 2013 are started. The wildcard * means all 2014 months. If not present, it defaults to 2015 no months. 2017 ma-calendar-days-of-week: The optional set of days of a week 2018 ("Mon", "Tue", "Wed", "Thu", "Fri", 2019 "Sat", "Sun") on which tasks scheduled 2020 using this object are started. The 2021 wildcard * means all days of the week. 2022 If not present, it defaults to no days. 2024 ma-calendar-days-of-month: The optional set of days of a months 2025 (1-31) on which tasks scheduled using 2026 this object are started. The wildcard 2027 * means all days of a months. If not 2028 present, it defaults to no days. 2030 ma-calendar-hours: The optional set of hours (0-23) on 2031 which tasks scheduled using this object 2032 are started. The wildcard * means all 2033 hours of a day. If not present, it 2034 defaults to no hours. 2036 ma-calendar-minutes: The optional set of minutes (0-59) on 2037 which tasks scheduled using this object 2038 are started. The wildcard * means all 2039 minutes of an hour. If not present, it 2040 defaults to no hours. 2042 ma-calendar-seconds: The optional set of seconds (0-59) on 2043 which tasks scheduled using this object 2044 are started. The wildcard * means all 2045 seconds of an hour. If not present, it 2046 defaults to no seconds. 2048 ma-calendar-timezone-offset: The optional timezone offest in hours. 2049 If not present, it defaults to the 2050 system's local timezone. 2052 If a day of the month is specified that does not exist in the month 2053 (e.g., 29th of Feburary) then those values are ignored. 2055 3.11.4. Definition of ma-one-off-obj 2057 object { 2058 datetime ma-one-off-time; 2059 } ma-one-off-obj; 2061 The ma-one-off-obj timing object specifies a fixed point in time. 2062 Schedules using an ma-one-off-obj are started once at the specified 2063 date and time. The ma-one-off-obj consists of the following 2064 elements: 2066 ma-one-off-time: The date and time at which Schedules using 2067 this object are started. 2069 3.11.5. Definition of ma-immediate-obj 2071 object { 2072 // empty 2073 } ma-immediate-obj; 2075 The ma-immediate-obj event object has no further information 2076 elements. Schedules using an ma-immediate-obj are started as soon as 2077 possible. 2079 3.11.6. Definition of ma-startup-obj 2081 object { 2082 // empty 2083 } ma-startup-obj; 2085 The ma-startup-obj event object has no further information elements. 2086 Schedules or suppressions using an ma-startup-obj are started at MA 2087 initialization time. 2089 3.11.7. Definition of ma-controller-lost-obj 2091 object { 2092 // empty 2093 } ma-controller-lost-obj; 2095 The ma-controller-lost-obj event object has no further information 2096 elements. The ma-controller-lost-obj indicates that connectivity to 2097 the controller has been lost. This is determined by a timer started 2098 after each successful contact with a controller. When the timer 2099 reaches the controller-timeout (measured in seconds), an ma- 2100 controller-lost-obj event is generated. This event may be used to 2101 start a suppression. 2103 3.11.8. Definition of ma-controller-connected-obj 2105 object { 2106 // empty 2107 } ma-controller-connected-obj; 2109 The ma-controller-connected-obj event object has no further 2110 information elements. The ma-controller-connected-obj indicates that 2111 connectivity to the controller has been established again after it 2112 was lost. This event may be used to end a suppression. 2114 4. Example Execution 2116 The example execution has two event sources E1 and E2 and three 2117 schedules S1, S2, and S3. The schedule S3 is started by events of 2118 event source E2 while the schedules S1 and S2 are both started by 2119 events of the event source E1. The schedules S1 and S2 have two 2120 actions each and schedule S3 has a single action. The event source 2121 E2 has no randomization while the event source E1 has the 2122 randomization r. 2124 Figure 2 shows a possible timeline of an execution. The time T is 2125 progressing downwards. The dotted vertial line indicates progress of 2126 time while a dotted horizontal line indicates which schedule are 2127 triggered by an event. Tilded lines indicate data flowing from an 2128 action to another schedule. Actions within a schedule are named A1, 2129 A2, etc. 2131 E2 E1 T S1 S2 S3 2132 sequential parallel pipelined 2133 : 2134 e0 + 2135 : 2136 : 2137 e0+r + .......... + .......... ++ 2138 : | A1 A1 || A2 2139 : + |+ ~~~~~~~> 2140 : | A2 | 2141 : | + ~~~~~~~~> 2142 : + ~~~~~~~~~~~~~~~~~~~~~> 2143 : 2144 : 2145 e1 + 2146 : 2147 e1+r + .......... + .......... ++ 2148 : | A1 A1 || 2149 : | +|~~~~~~~> 2150 : | | A2 2151 : + +~~~~~~~> 2152 : | A2 2153 : + ~~~~~~~~~~~~~~~~~~~~> 2154 e0 + ................................... + 2155 : | A1 2156 e3 + | 2157 e3+r + .......... + .......... ++ | 2158 : | A1 A1 || A2 | 2159 : + ++ ~~~~~~> | 2160 : | A2 + 2161 : + ~~~~~~~~~~~~~~~~~~~~> 2162 V 2164 Figure 2: Example Execution 2166 Note that implementations must handle possible concurrency issues. 2167 In the example execution, action A1 of schedule S3 is consuming the 2168 data that has been forwarded to schedule S3 while additional data is 2169 arriving from action A2 of schedule S2. 2171 5. IANA Considerations 2173 This document makes no request of IANA. 2175 Note to the RFC Editor: this section may be removed on publication as 2176 an RFC. 2178 6. Security Considerations 2180 This Information Model deals with information about the control and 2181 reporting of the Measurement Agent. There are broadly two security 2182 considerations for such an Information Model. Firstly the 2183 Information Model has to be sufficient to establish secure 2184 communication channels to the Controller and Collector such that 2185 other information can be sent and received securely. Additionally, 2186 any mechanisms that the Network Operator or other device 2187 administrator employs to pre-configure the MA must also be secure to 2188 protect unauthorized parties from modifying pre-configuration 2189 information. These mechanisms are important to ensure that the MA 2190 cannot be hijacked, for example to participate in a distributed 2191 denial of service attack. 2193 The second consideration is that no mandated information items should 2194 pose a risk to confidentiality or privacy given such secure 2195 communication channels. For this latter reason items such as the MA 2196 context and MA ID are left optional and can be excluded from some 2197 deployments. This would, for example, allow the MA to remain 2198 anonymous and for information about location or other context that 2199 might be used to identify or track the MA to be omitted or blurred. 2201 The Information Model should support wherever relevant, all the 2202 security and privacy requirements associated with the LMAP Framework. 2204 7. Acknowledgements 2206 Several people contributed to this specification by reviewing early 2207 versions and actively participating in the LMAP working group 2208 (apologies to those unintentionally omitted): Vaibhav Bajpai, Michael 2209 Bugenhagen, Timothy Carey, Alissa Cooper, Kenneth Ko, Al Morton, Dan 2210 Romascanu, Henning Schulzrinne, Andrea Soppera, Barbara Stark, and 2211 Jason Weil. 2213 Trevor Burbridge, Philip Eardley, Marcelo Bagnulo and Juergen 2214 Schoenwaelder worked in part on the Leone research project, which 2215 received funding from the European Union Seventh Framework Programme 2216 [FP7/2007-2013] under grant agreement number 317647. 2218 Juergen Schoenwaelder was partly funded by Flamingo, a Network of 2219 Excellence project (ICT-318488) supported by the European Commission 2220 under its Seventh Framework Programme. 2222 8. References 2224 8.1. Normative References 2226 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate 2227 Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/ 2228 RFC2119, March 1997, 2229 . 2231 [RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet: 2232 Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002, 2233 . 2235 [RFC7594] Eardley, P., Morton, A., Bagnulo, M., Burbridge, T., 2236 Aitken, P., and A. Akhter, "A Framework for Large-Scale 2237 Measurement of Broadband Performance (LMAP)", RFC 7594, 2238 DOI 10.17487/RFC7594, September 2015, 2239 . 2241 8.2. Informative References 2243 [I-D.ietf-ippm-metric-registry] 2244 Bagnulo, M., Claise, B., Eardley, P., Morton, A., and A. 2245 Akhter, "Registry for Performance Metrics", draft-ietf- 2246 ippm-metric-registry-10 (work in progress), November 2016. 2248 [I-D.ietf-lmap-yang] 2249 Schoenwaelder, J. and V. Bajpai, "A YANG Data Model for 2250 LMAP Measurement Agents", draft-ietf-lmap-yang-08 (work in 2251 progress), November 2016. 2253 [RFC3444] Pras, A. and J. Schoenwaelder, "On the Difference between 2254 Information Models and Data Models", RFC 3444, DOI 10 2255 .17487/RFC3444, January 2003, 2256 . 2258 [RFC7398] Bagnulo, M., Burbridge, T., Crawford, S., Eardley, P., and 2259 A. Morton, "A Reference Path and Measurement Points for 2260 Large-Scale Measurement of Broadband Performance", RFC 2261 7398, DOI 10.17487/RFC7398, February 2015, 2262 . 2264 Appendix A. Change History 2266 Note to the RFC Editor: this section should be removed on publication 2267 as an RFC. 2269 A.1. Non-editorial changes since -13 2271 o Removed the ma-config-device-id from the ma-config-obj. 2273 o Added ma-config-report-group-id and clarified how two flags ma- 2274 config-report-agent-id and ma-config-report-group-id work. 2276 A.2. Non-editorial changes since -12 2278 o Renamed the ma-metrics-registry-obj to ma-registry-obj since tasks 2279 may refer to different registries (not just a metrics registry). 2281 o Clarifications and bug fixes. 2283 A.3. Non-editorial changes since -11 2285 o Clarifications and bug fixes. 2287 A.4. Non-editorial changes since -10 2289 o Rewrote the text concerning the well-known "channel" option name. 2291 o Added ma-report-result-event-time, ma-report-result-cycle-number, 2292 and ma-event-cycle-interval. 2294 o Added ma-capability-tags. 2296 o Added a new section showing an example execution. 2298 o Several clarifications and bug fixes. 2300 A.5. Non-editorial changes since -09 2302 o Added ma-status-schedule-storage and ma-status-action-storage. 2304 o Removed suppress-by-default. 2306 o Moved ma-report-result-metrics of the ma-report-result-obj to ma- 2307 report-table-metrics of the ma-report-table-obj so that the 2308 relationship between metrics and result tables is clear. 2310 o Added ma-report-conflict-obj. 2312 o Added ma-report-result-status to ma-report-result-obj. 2314 o Several clarifications and bug fixes. 2316 A.6. Non-editorial changes since -08 2318 o Refactored the ma-report-task-obj into the ma-report-result-obj. 2320 o Introduced the ma-report-table-obj so that a result can contain 2321 multiple tables. 2323 o Report schedule, action, and task name as part of the ma-report- 2324 result-obj. 2326 o Report conflicts per ma-report-result-obj and not per ma-report- 2327 row-obj. 2329 o Report the start/end time as part of the ma-report-result-obj. 2331 A.7. Non-editorial changes since -07 2333 o Added ma-schedule-end and ma-schedule-duration. 2335 o Changed the granularity of scheduler timings to seconds. 2337 o Added ma-status-suppression-obj to report the status of 2338 suppressions as done in the YANG data model. 2340 o Added counters to schedule and action status objects to match the 2341 counters in the YANG data model. 2343 o Using tags to pass information such as a measurement cycle 2344 identifier to the collector. 2346 o Using suppression tags and glob-style matching to select schedules 2347 and actions to be suppressed. 2349 A.8. Non-editorial changes since -06 2351 o The default execution mode is pipelined (LI12) 2353 o Added text to define which action consumes data in sequential, 2354 pipelines, and parallel execution mode (LI11) 2356 o Added ma-config-measurement-point, ma-report-measurement-point, 2357 and ma-config-report-measurement-point to configure and report the 2358 measurement point (LI10) 2360 o Turned ma-suppression-obj into a list that uses a start event and 2361 a stop event to define the start and end of suppression; this 2362 unifies the handling of suppression and loss of controller 2363 connectivity (LI09) 2365 o Added ma-controller-lost-obj and ma-controller-ok-obj event 2366 objects (LI09) 2368 o Added ma-status-schedule-obj to report the status of a schedule 2369 and refactored ma-task-status-obj into ma-status-action-obj to 2370 report the status of an action (LI07, LI08) 2372 o Introduced a common ma-metric-registry-obj that identifies a 2373 metric and a set of associated roles and added this object to 2374 expose metric capabilities and to support the configuration of 2375 metrics and to report the metrics used (LI06) 2377 o Introduced ma-capability-obj and ma-capability-task-obj to expose 2378 the capabilities of a measurement agent (LI05) 2380 o Use 'ordered list' or 'unordered set' instead of list, collection, 2381 etc. (LI02) 2383 o Clarification that Actions are part of a Schedule (LI03) 2385 o Deleted terms that are not strictly needed (LI04) 2387 A.9. Non-editorial changes since -05 2389 o A task can now reference multiply registry entries. 2391 o Consistent usage of the term Action and Task. 2393 o Schedules are triggered by Events instead of Timings; Timings are 2394 just one of many possible event sources. 2396 o Actions feed into other Schedules (instead of Actions within other 2397 Schedules). 2399 o Removed the notion of multiple task outputs. 2401 o Support for sequential, parallel, and pipelined execution of 2402 Actions. 2404 Authors' Addresses 2406 Trevor Burbridge 2407 BT 2408 Adastral Park, Martlesham Heath 2409 Ipswich IP5 3RE 2410 United Kingdom 2412 Email: trevor.burbridge@bt.com 2413 Philip Eardley 2414 BT 2415 Adastral Park, Martlesham Heath 2416 Ipswich IP5 3RE 2417 United Kingdom 2419 Email: philip.eardley@bt.com 2421 Marcelo Bagnulo 2422 Universidad Carlos III de Madrid 2423 Av. Universidad 30 2424 Leganes, Madrid 28911 2425 Spain 2427 Email: marcelo@it.uc3m.es 2429 Juergen Schoenwaelder 2430 Jacobs University Bremen 2431 Campus Ring 1 2432 Bremen 28759 2433 Germany 2435 Email: j.schoenwaelder@jacobs-university.de