Multiprotocol Label Switching (mpls)

In addition to this official charter maintained by the IETF Secretariat, there is additional information about this working group on the Web at:

MPLS Architectural Considerations for a Transport Profile (PDF)

Last Modified: 2008-04-23

Additional information is available at tools.ietf.org/wg/mpls

Chair(s):

George Swallow <swallow@cisco.com>

Loa Andersson <loa@pi.se>

Routing Area Director(s):

Ross Callon <rcallon@juniper.net>

David Ward <dward@cisco.com>

Routing Area Advisor:

Ross Callon <rcallon@juniper.net>

Mailing Lists:

General Discussion: mpls@lists.ietf.org
To Subscribe: https://www1.ietf.org/mailman/listinfo/mpls
Archive: http://www.ietf.org/mail-archive/web/mpls/current/maillist.html

Description of Working Group:

The MPLS working group is responsible for standardizing a base
technology for using label switching and for the implementation of
label-switched paths over various packet based link-level
technologies, such as Packet-over-Sonet, Frame Relay, ATM, and
LAN technologies (e.g. all forms of Ethernet, Token Ring, etc.).
This includes procedures and protocols for the distribution of
labels between routers and encapsulation.

The working group is also responsible for specifying the necessary
MIBs for the functionality specified in the base MPLS technology.

The first generation of the MPLS standards are largely complete,
and the current WG work items are:

- Define requirements, mechanisms and protocol extensions for
point-to-multipoint (P2MP) MPLS

- Define requirements, mechanisms and protocol extensions for
traffic engineered point-to-multipoint (P2MP) MPLS, including
soft preemption

- Define requirements and mechanisms for MPLS OAM

- Define an overall OAM framework for MPLS applications

- MPLS-specific aspects of traffic engineering for multi-areas/multi-AS
in cooperation with the CCAMP WG

- Determine (with CCAMP) what procedures are appropriate for evaluating
proposals to extend the MPLS and GMPLS protocols, and document these

- Document current implementation practices for MPLS load sharing

The Working Group chairs tracking of the working group documents can be
viewed at http://www.tla-group.com/~mpls/mpls-wg-docs.htm

Goals and Milestones:

Done		Submit documents from original MPLS effort to IESG
Done		Framework for IP multicast over label-switched paths ready for advancement.
Done		LDP fault tolerance specification ready for advancement to Proposed Standard.
Done		Submit Definitions of Managed Objects for MultoiProtocol Label Switching, Label Distribution Protocol (LDP) to the IESG for publication as Proposed Standards
Done		Specification for MPLS-specific recovery ready for advancement.
Done		Submit Multiprotocol Label Switching (MPLS) Forward Equivalency Class-To-Next Hop Label Forwarding Entry Management Information Base to the IESG for publication as Proposed Standards
Done		Submit Multiprotocol Label Switching (MPLS) Label Switching Router (LSR), Management Information Base to the IESG for publication as Proposed Standards
Done		Submit Multiprotocol Label Switching (MPLS) Management Overview to the IESG for publication as Proposed Standards
Done		Submit Definitions of Textual Conventions for Multiprotocol Label Switching (MPLS) Management to the IESG for publication as Proposed Standards
Done		Submit Multiprotocol Label Switching (MPLS) Traffic Engineering Management Information Base to the IESG for publication as Proposed Standards
Done		Submit the Traffic Engineering Link MIB to the IESG for as a Proposed Standard
Done		Submit a specification on Encapsulations to carry MPLS over IP and GRE to the IESG for as a Proposed Standard
Done		Submit specification on LSP Ping to the IESG for publication as a Proposed Standard
Done		Submit a document defining the scope, requirements, and issues to resolve for setup of P2MP TE LSPs (MPLS and GMPLS)
Done		Submit an OAM Framework Document to the IESG for publication as an Informational RFC
Done		Submit a BCP on MPLS load sharing to the IESG
Done		Submit specification on LSR Self Test to the IESG for publication as a Proposed Standard
Done		Submit document(s) specifying protocol extensions, enhancements and mechanisms for setup of P2MP TE LSPs
Jun 2007		Submit requirements for point-to-multipoint extensions to LDP
Dec 2007		Submit document(s) specifying LDP extensions for setup of P2MP LSPs
Dec 2007		Submit a specification on Soft Pre-emption of LSP Tunnels to the IESG for publication as a Proposed Standard
Mar 2008		Submit a MPLS security framework for publication as an informational RFC

Internet-Drafts:

Multiprotocol Label Switching (MPLS) Traffic Engineering Management Information Base for Fast Reroute (80599 bytes)
MPLS Traffic Engineering Soft Preemption (29491 bytes)
Component Link Recording and Resource Control for TE Link Bundles (29859 bytes)
MPLS Multicast Encapsulations (22749 bytes)
Label Distribution Protocol Extensions for Point-to-Multipoint and Multipoint-to-Multipoint Label Switched Paths (73514 bytes)
MPLS Upstream Label Assignment and Context-Specific Label Space (29992 bytes)
MPLS Upstream Label Assignment for RSVP-TE (19260 bytes)
MPLS Upstream Label Assignment for LDP (22652 bytes)
Requirements for Point-To-Multipoint Extensions to the Label Distribution Protocol (41178 bytes)
A Link-Type sub-TLV to convey the number of Traffic Engineering Label Switched Paths signalled with zero reserved bandwidth across a link (16076 bytes)
Point-to-Multipoint Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) Management Information Base (MIB) module (131967 bytes)
LDP Typed Wildcard FEC (17775 bytes)
Proxy LSP Ping (30793 bytes)
P2MP MPLS-TE Fast Reroute with P2MP Bypass Tunnels (34393 bytes)
LDP Capabilities (27144 bytes)
Node behavior upon originating and receiving Resource ReserVation Protocol (RSVP) Path Error message (14738 bytes)
LDP extension for Inter-Area LSP (26241 bytes)
Security Framework for MPLS and GMPLS Networks (140314 bytes)
An Analysis of Scaling Issues in MPLS-TE Core Networks (94832 bytes)
LDP IGP Synchronization (18440 bytes)

Request For Comments:

IETF Secretariat - Please send questions, comments, and/or suggestions to ietf-web@ietf.org.

Return to working group directory.

Return to IETF home page.